Some standard content:
1CS 21.060.40
National Standard of the People's Republic of China
GB/T 3099.2—2004/IS0 14586:2000Terminology of fastenersBlind rivels(iSO14583:2000,Blind rivets—Termirologyand definitinns.l)T)2004-02-10 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration
2004-08-01 Implementation
GB/T3099.2—2002/IS014582.200 Part 1 of the national standard "tight production language" series: This series includes G3/T305-1U82 and its annexes. The standard number will be changed to: GB/T3099.1 G 3a93.3—2001
Tight workpiece terminology has six parts, part 2 of GB133.
This part is equivalent to the national standard S)14G88:2GCC has the English version of the technical instructions and the standard text, the main content is as follows:-1S)14588 gives the standard text and the standard text, and the Chinese and English technical terms and definitions are given in the standard. The six parts of the appendix A are informative requirements.
This part is issued by the China Machinery Industry Association, and this part is under the jurisdiction of the National Technical Committee for Standardization (SAT5). The Ministry of Technology is responsible for the preparation of the National Standardization Technical Committee, and the Ministry of Technology is responsible for the preparation of the National Technical Committee for Standardization. This part is a new version of the standard GB/T3099.2-2004/1S14588.2000 Fasteners Terminology Blind Rivets This part specifies the terms and definitions of blind rivets (including core-pulling rivets and core-driving rivets), as well as the terms and definitions of installation and installation for parts. The appendix to this part is in alphabetical order, with English references and tables. 2 Terms and definitions 2.1.1, 1 2.1.1.1. 1
One and the body!
—body!
Nail body hole:
Square head
To the core:
To sell!
Shuangbi
New thinking rod:
Rivet
blind rlvel
htind rivet houly
Nail body headwww.bzxz.net
: hlind rivet head
protroding blind
rivethead
When these parts are installed, they can be installed from one side of the barrel. Note 1: The nail is composed of a
and a core. During the
connection process, its The body can be deformed to strengthen the body, and the body can also be ordered. Note 2: The bamboo is composed of a bead head, a rod, a bamboo body belt and a body hole, and the nail is located at the nail servant pre-shaped part of the person or installation. The nail is connected to the surface of the fixed part, see GB/T 3C99.2—200-/ISO 1458B:2000 Article number
2. 1. 1. . 2
2. 1. 1. 2
2. 1. 1. 3
Rivet head,
Buried rivet head
After the rivet is replaced, the rivet body produced with the surface of the fastened
part is:
countersumk hlintlSee figure.
rivet head
blind rivet shank
blind rivet end
blind rivut end
nail body hole
hlind rivel eure
nandrel
heavy help head
blldhead
nail core type
nail reaches the flexible end of the nail head below the nail head
so that the end of the body rod closest to the nail head,
: to reach,
! type or section.
cylinder body shoots out to the hole.
note: the whole agent can be passed
through the annual growth,
is an element in the body
, the source often has a break busy.
note 1, it has a natural connection, the needle
rod can be rod
mountain ring.
She 2, La Shan or Shan Ren Ting Xin: Make
beat the body to increase the shape for the mutual
Norway,
order the body's natural La that point. Part
connect to the sinking return to hit the head of the nail body
edit in the previous art Yi Ying work step one, change
shape and the shape of the most part, see Figure?
and Chuan 3.
ofhliod
mandrels
andpins
2. 2. 1. 1
2. 2. 1. 2
2. 2. 1. 3
2. 2. 1. 5
GB/T 3099.2—2C04/L5U 14588,2000 Terminology
Pull-out mandrel
pulmandrel
Through-through mandrel
pnll Thiugh
mrandrel
fracture type nail core
hrpakpnll
nandrel
escape type nail core
hreakhencl
mandrel
non-breaking pear type core
qunr-bruk pull
inandrel
embedded type nail core
structural tlush
After entering the fastened parts
through the hole, the core is subjected to axial pulling
force, and its head is deformed
at the end
blood shadow inflammation.
Design: This kind of pull-out
solid core see 2.2..1
2.7.1.3.
After the new steel is pressed, the needle core will be
through the hole to find the hollow part
nail, see the figure
rivet flag after the press is cut at
heart core junction or piece
close. The head and the core
nail core material is in the body of the set, see
thank you for the plan to break at
heart and core rod junction The core rod is broken at some point inside or outside the workpiece, see the figure.
pulmandrel
: The standard is to the needle body, so that the low multi-head
car support F
CB/T 3099.2-20C4/INO 14588, 2000
2. 2. 1. 6
card-type core
mnlti-grin fliesh
breakposhtlve
riveting blanket, the expected deformation of the core rod and ()
nail body produces a relatively large
human nailing force
and in the connection.The top surface of the head of the core garment is pulled off flush with the top surface of the pall masonrel, so that the core joint head is made into a nail and there is a shear protection surface on the nail rod, see Figure 9. In particular, it can be noted that the drive pin body types are as follows: Types of blind, Flet shanks, open type, apen end, multi-drum type, apen end, extended wet type, closed type, end end, and the pre-installed needle core protrudes from the pin head into the through hole of the fixed part, and when the core is driven into the body, it will be aligned with the pre-prepared surface of the head. The end of the nail body is expanded to form a head. The entire length of the nail body is narrow and can be used with any type of nail core. See Figure 11. Note: the shape is shown in 2.2.1.1-2.3-6. In addition to the special parallel type, it is also possible to approach the larger range of pressure, see Figure 12.
End is not closed and remains closed after connection, see
Note, core type see 2.2.1.2
Effect 2.2.J.4,
GBT 3099.2—2004/ISO 1458B:2000
Expanded hole
split ad
opened shank
klotted shank
Types of blind
rivel eons
led core
completely filled hole
Semi-rilled hole
non-filled hole
hollow Performance characteristics Maximum tensile load Maximum shear load Maximum shear load The end of the body is divided into two or more pieces along the platinum, see Figure 14 and Figure 5. When the core type is shown in 8. 2. 1.1--2. 2. 1. 4, 2. 2.-. 0 or 2. 2. 2. There is an axial groove between the connector and the end of the body, see 25.
: Sichuan 3. 2, . 1 -
2,2,5,
the material is sold and connected, and the nail heart fracture inside the nail is kept straight and the head of the nail body is level, see figure?
. Figure: After the nails are connected, a section of the nail body is in the nail body:
see figure:,
the nails are connected, and the nail core is not
made into a body: the lead body is hollow
, see figure. Figure 3
Tension force
Residue selling Inad
Mandrel hreak
Pul-tugether
capahility
Clamping force
Residnnl loacl
Mandrel removal force
Mundrel pnsh ont
reslytanee
head holding ability
mandrel head re-
lenliun rupnbility
sealing ability
sealing cnpahility
hole ll capabllity
dimen91ons
complete the connection of the case before the holder can pull the core apart after the nail is pulled out of the medicine or estimate. The rivet steel joint prints, eliminates the trace symbol between the parts being fixed, the development force of the old small joint during the connection, the connection is fixed, and the small shaft company
tension is created.
The resistance of the steel core to separate the core from any body
,
After the connection, the force
of the remaining part of the core
is kept in the body.
The ability of the core to prevent gas, oil
or liquid from passing through the holes and
gaps of the body.
After the connection, the ability of the liquid to expand
to the true hole or
.
2. 6. 1. 1
2. 6. 1. 2
2. 6. 1. 3
White area length
Non-turning diameter:
Order head diameter;
Core diameter;
Wide area length:
One small centripetal diameter:
"Measurement direction some principles,
There are body and height;
Answer the connection of the clock length,
CR/T3099.2—2004/ISO1458B:2000 terminology
Hundred rivets
hlindrvet
clock hitting length
rivelkngtlh
Blind area length
blind length
Ting core is long and P
State core (square) nail is small
Liaoning Medical 17.
Parallel to the rivet axis and the amount of
head bearing surface feeling sinking inflammation attack surface
To the body in front of the start:
Ren opening part order: parallel to
steel order push line measurement weight research related support car
and double countersunk head and needle core head
top of the two.
: type area
original equal length.
Connected before, parallel axis
line measurement of the order of the spirit of the hit piece
mandrelprotru-
hitting application
blind rivet Applied
antiar
head extension length change.
Measurements used are shown in Figure 3.
B/T3099.2-2004/1SO145882000
2. 6. 2. 1
2. 6. 2. 3
2. 6.2. 5
2. 6. 2. 7
Nail hole
Installation clearance
assemblyhole
Joint length g
igrp length
Joint range
eriprange
crew length
blind side prokru-
high example axial hollow center
hlind sile xisl
clexrane
west creation hollow acid C,
blind side radlal
clearaie
two spacers
tnol clearance
direct removal of riveting and
suppression tool
Ilind rivet settlne
anl setting cquipr
single or multiple holes for installing steel
nail on the fastened part,
total thickness of the fastened parts.
state a given length of shop
agent, can be point belt then,The zero
busy carbon small difference
range of the total degree of the
string:
the length of the area
the length of the flower
is not connected
the edge of the Tingzhi or the end of the body
the distance between the opposite nuclear element and the lower part
of the surface:
juice, in order to be able to press normally, the high surface
the oil blood limit of the German
dry moon surface--including Shenshan| |tt||The vertical white nail board line measurement shows
the atmosphere version training zero cow door has part
of the gray surface to the sleeve line
towards: in order to be able to stop the belt gradually connected, the white surface
creation of the plateau must
day Ding Zhao body head down suitable,
fire ordinary people needle
connection, the loss of the Sichuan close to the side
nano teeth 1 and so fine the minimum
space limit,
2. 7. 1. 1
2. 7. 1. 2
2. 7. 1, 3
2. 7. 1. 4
GB/T3099.2—2004/ISO14588.2C00 Terminology
seulng
Riveting tools
Setting tnol
Grabbing mechanism
nse embly
Core collecting box
mandrel culcher
Nail core collecting system
raikhel mlertion
dressiag
will be inserted into the installation of the world's most sensitive tightening zero
, the clamp is closed and the joint is fixed.
It is a specially designed equipment for installing and receiving steel nails,
juice: it can be manual, pneumatic, wave pressure,
electric or political force. The original
including thermal tightening and action mechanism
.Tools:
used to collect the core of the craftsman's feeling
crew according to the tool accessories
.
upward connection, used to release, transport
deliver or collect the broken steel
core of the steel
worker,
connect the auxiliary
purchase of the three-pointer of the nail core of the nail body
head of the nail core.
CB/T3099.2—2034/1S14538:2000 Appendix
(Appendix
Terminology reference table
According to the English terminology, the text reference table is given in the English version. See table. English terminology reference table
nsseulv hule
hlindbwu
hlind length
hlind rivet
hlindriretapptiratinn
hlind rivet bady
hlind rivel anre
blind rivel end
blind rivet bead
bllad iel sbank
blind slde axial clearunct
blind sideradial rlearance
blind side protrusion
Ireak head unandrcl
break pul nandrel
elanping Fuicc
earanec holc
clsed ced
cunlerhnkblird rivelheud
dressing
rlrire pin
Milal rore
gitplengil
grp rang
hole fill capahility
hollawcnre
Chinese art shop
An crack hole
Tai Xie head
Yan District Chief
Yang Yangzhu
Application of Beijing nail
Nail hole
Nail end
Nail head
Nail rod
High axial clearance||tt| |Lateral longitudinal space
Extended length
Pull-out nail core
Broken nail core
Tightening force
Enclosed
Inserted nail head
Drive-in nail core
Filling
Riveting length
Riveting range
Filling capacity
Non-hole
2. 6, 1. 2
2,1.2. 6.1
2. 1. 1,. 3
2. 1, 1. 1
2, 1, 1. 2
2. 6.2. 6
2. 6. 2. 4
2. 2. 1.2
2, 6.2. 1
2. 1, 1, 1, 2Citation list of this language
British communication terms
nsseulv hule
hlindbwu
hlind length
hlind rivet
hlindriretapptiratinn||tt| |hlind rivet bady
hlind rivel anre
blind rivel end
blind rivet bead
bllad iel sbank
blind slde axial clearunct
blind sideradial rlearance
blind side protrusion
Ireak head unandrcl
break pul nandrel
elanping Fuicc
earanec holc
clsed ced
cunlerhnkblird rivelheud
dressing
rlrire pin
Milal rore
gitplengil
grp rang|| tt||hole fill capahility
hollawcnre
Chinese art shop
An crack hole
Tai Xietou
Yan District Chief
Yin Yang Bamboo
Application of Jingyin nails
Nail hole
Nail end
Nail head
Nail rod
High example Axial space compensation||tt| |Lateral longitudinal space
Extended length
Pull-out nail core
Broken nail core
Central tightening force
Closed type
Drive-in nail head
Drive-in nail core
;Filling
Riveting length
Riveting range
Hole filling capability
Non-Dian hole
2. 6, 1. 2
2,1.2. 6.1
2. 1. 1,. 3
2. 1, 1. 1
2, 1, 1 . 2
2. 6.2. 6
2. 6. 2. 4
2. 2. 1.2
2, 6.2. 1
2. 1, 1, 1, 2Citation list of this language
British communication terms
nsseulv hule
hlindbwu
hlind length
hlind rivet
hlindriretapptiratinn||tt| |hlind rivet bady
hlind rivel anre
blind rivel end
blind rivet bead
bllad iel sbank
blind slde axial clearunct
blind sideradial rlearance
blind side protrusion
Ireak head unandrcl
break pul nandrel
elanping Fuicc
earanec holc
clsed ced
cunlerhnkblird rivelheud
dressing
rlrire pin
Milal rore
gitplengil
grp rang|| tt||hole fill capahility
hollawcnre
Chinese art shop
An crack hole
Tai Xietou
Yan District Chief
Yin Yang Bamboo
Application of Jingyin nails
Nail hole
Nail end
Nail head
Nail rod
High example Axial space compensation||tt| |Lateral longitudinal space
Extended length
Pull-out nail core
Broken nail core
Central tightening force
Closed type
Drive-in nail head
Drive-in nail core
;Filling
Riveting length
Riveting range
Hole filling capability
Non-Dian hole
2. 6, 1. 2
2,1.2. 6.1
2. 1. 1,. 3
2. 1, 1. 1
2, 1, 1 . 2
2. 6.2. 6
2. 6. 2. 4
2. 2. 1.2
2, 6.2. 1
2. 1, 1, 1, 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.