JB/T 9162.28-1999 Clamping rod dimensions
Basic Information
Standard ID:
JB/T 9162.28-1999
Standard Name: Clamping rod dimensions
Chinese Name:
夹持杆 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9162.28-1999 JB/T 9162.28-1999 Clamping rod dimensions JB/T9162.28-1999 Standard download decompression password: www.bzxz.net
Some standard content:
JCS 25.080.01
Standard of the Machinery Industry of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jigwwW.bzxz.Net
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
Standard of the Machinery Industry of the People's Republic of China
Clamping rod
Clamping rod This standard specifies the types and sizes of clamps: Types and sizes The types and sizes are as shown in the following figure. 9 Marking example: Marking of clamping rod with limit value = 180mm: Fire clamping rod 12×180 JBT9162.28-1999 Approved by the State Machinery Industry Bureau on May 7, 1999 JB9162.28—1999 [441.28-8] Implementation on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.