title>JB/T 4724-1992 Support bearing - JB/T 4724-1992 - Chinese standardNet - bzxz.net
Home > JB > JB/T 4724-1992 Support bearing
JB/T 4724-1992 Support bearing

Basic Information

Standard ID: JB/T 4724-1992

Standard Name: Support bearing

Chinese Name: 支承式支座

Standard category:Machinery Industry Standard (JB)

state:Abolished

Date of Release1993-03-06

Date of Implementation:1993-05-01

Date of Expiration:2008-02-01

standard classification number

Standard Classification Number:Machinery>>General Machinery and Equipment>>J74 Pressure Vessel

associated standards

alternative situation:Replaced JB 1166-1981; replaced by JB/T 4712.4-2007

Publication information

publishing house:Machinery Industry Press

Publication date:2004-04-23

other information

Focal point unit:National Pressure Vessel Standardization Technical Committee Design Subcommittee

Publishing department:National Pressure Vessel Standardization Technical Committee Design Subcommittee

Introduction to standards:

This standard specifies the structural type, series parameter dimensions, allowable load, manufacturing requirements and selection methods of supported bearings. This standard applies to steel vertical cylindrical containers under the following conditions: a. Nominal diameter DN800mm~4000mm; b. The ratio of cylinder length L to nominal diameter DN L/DN≤5; c. Total height of the container H0≤10m . JB/T 4724-1992 supporting bearing JB/T4724-1992 standard download and decompression password: www.bzxz.net

Some standard content:

1
Theme content and applicable examples
1.1 Theme content
Industry standards of the People's Republic of China,
Supported bearings
JB/ T4724-92
This standard specifies the structural type, series parameter dimensions, allowable load, manufacturing requirements and selection methods of support bearings. 1. 2 Scope of applicationbzxz.net
This standard is applicable to steel vertical circular simplified containers under the following conditions: a. Nominal diameter DN800mm ~ 4000mm;
b. The ratio between the circular length L and the nominal diameter DN RatioL/DN
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.