GB 16232-1996 Hygienic standard for gypsum dust in workshop air
Basic Information
Standard ID:
GB 16232-1996
Standard Name: Hygienic standard for gypsum dust in workshop air
Chinese Name:
车间空气中石膏粉尘卫生标准
Standard category:National Standard (GB)
state:in force
Date of Release1996-04-03
Date of Implementation:1996-09-01
standard classification number
Standard ICS number:Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplace
Standard Classification Number:Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
associated standards
Publication information
other information
Release date:1996-04-03
Review date:2004-10-14
Drafting unit:School of Public Health, Tongji Medical University
Focal point unit:Ministry of Health
Publishing department:State Bureau of Technical Supervision
competent authority:Ministry of Health
Introduction to standards:
This standard specifies the maximum permissible concentration of gypsum dust in the air of a workshop and its monitoring and inspection methods. This standard is applicable to all types of enterprises that produce and use gypsum. GB 16232-1996 Hygienic standard for gypsum dust in the air of a workshop GB16232-1996 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Health standard for gypsum dust in the air of the workplace
1 Subject content and scope of application
This standard specifies the maximum permissible concentration of gypsum dust in the air of the workplace and its monitoring and inspection methods. This standard applies to all types of enterprises that produce and use gypsum. 2 Reference standards
GB5748 Determination of dust in the air of the workplace 3 Hygiene requirements
The maximum permissible concentration of gypsum dust in the air of the workplace is 10mg/m4 Monitoring method
The determination of gypsum dust concentration and free silica content shall be carried out in accordance with GB5748. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. GB16232--1996bzxZ.net
This standard was drafted by the School of Public Health of Tongji Medical University and the Institute of Occupational Disease Prevention and Control of Guangxi Zhuang Autonomous Region. The main drafters of this standard are Zhang Minxuan and Wang Li. This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, entrusted by the Ministry of Health. Approved by the State Bureau of Technical Supervision on April 3, 1996 and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.