JB/T 9163.20-1999 Adjustment pad size
Basic Information
Standard ID:
JB/T 9163.20-1999
Standard Name: Adjustment pad size
Chinese Name:
调整垫 尺寸
Standard category:Machinery Industry Standard (JB)
state:in force
Date of Release1999-05-20
Date of Implementation:2000-01-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine Tools
Standard Classification Number:Machinery>>Metal Cutting Machine Tools>>J52 Machine Tool Accessories and Accessories
Publication information
other information
Focal point unit:Mechanical Science Research Institute
Introduction to standards:
JB/T 9163.20-1999 JB/T 9163.20-1999 Adjustment pad size JB/T9163.20-1999 Standard download decompression password: www.bzxz.net
Some standard content:
ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
JB/T9163.1~9163.20--1999
Fixtures and attachments for gear cutting machine
Fixtures and attachments for gear cutting machine1999-05-20Promulgated
Approved by State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Regulating washers
Dimensions
Regulating washers
-Dimenglons
This type of double-standard regulating washers specifies the types and dimensions: applicable to various gear spindles. 2 Type and size
Type and size The following figures and tables are valid
Classification
National Machinery Industry Standard 1999-05-20 Beijing Standard 2n
Extreme Limit D1]
f 2411
JBT9163.20-1999
Japanese Standard 52002.2987
2000-01-1 Implementation
3 Marking
Limited difference
+U 27Ih
Marking example:wwW.bzxz.Net
JB/T9163.2U—1999
Table (end;
Basic size
Jin-20rurn adjustment mark:
Adjustment pad J5×20JB/T9163.20—199968
Maximum normal close [311
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.