title>JB/T 7140.2-1993 Technical requirements for livestock medicated bath machinery - JB/T 7140.2-1993 - Chinese standardNet - bzxz.net
Home > JB > JB/T 7140.2-1993 Technical requirements for livestock medicated bath machinery
JB/T 7140.2-1993 Technical requirements for livestock medicated bath machinery

Basic Information

Standard ID: JB/T 7140.2-1993

Standard Name: Technical requirements for livestock medicated bath machinery

Chinese Name: 牲畜药浴机械 技术条件

Standard category:Machinery Industry Standard (JB)

state:in force

Date of Release1993-11-21

Date of Implementation:1994-03-01

standard classification number

Standard Classification Number:Agriculture, Forestry>>Agricultural and Forestry Machinery and Equipment>>B92 Livestock and Poultry Machinery and Equipment

associated standards

Publication information

publishing house:Mechanical Industry Press

Publication date:1994-02-01

other information

drafter:Song Lanying

Drafting unit:Hohhot Animal Husbandry Machinery Research Institute, Ministry of Machinery Industry

Focal point unit:Hohhot Animal Husbandry Machinery Research Institute, Ministry of Machinery Industry

Proposing unit:Hohhot Animal Husbandry Machinery Research Institute, Ministry of Machinery Industry

Publishing department:Ministry of Machinery Industry of the People's Republic of China

Introduction to standards:

This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, etc. of livestock and animal medicated bathing machinery. This standard applies to medicated bathing machines with upper and lower nozzles and convection circular bathing fields. Other types of medicated bathing machines can also be used as a reference. JB/T 7140.2-1993 Technical conditions for livestock medicated bathing machinery JB/T7140.2-1993 Standard download decompression password: www.bzxz.net

Some standard content:

Mechanical Industry Standard of the People's Republic of China
Livestock Medicated Bath Machinery
Technical Conditions
Subject Content and Scope of Application
JB/T7140.293
This standard specifies the technical requirements, test methods, inspection rules, marking, packaging, etc. of livestock medicated bath machinery (hereinafter referred to as medicated bath machinery). This standard applies to medicated bath machinery with upper and lower nozzle convection circular baths for spraying. Other types of medicated bath machinery can also be used for reference. 2 Reference standards
GB2828
GB5662
JB/T5673
JB/T7140.3
3 Technical requirements
Batch inspection counting sampling procedures and sampling tables (applicable to continuous batch inspection) Axial suction centrifugal pump (16bar) Marking, performance and dimensions General technical conditions for painting agricultural and forestry tractors and machinery Test methods for animal medicated bath machinery
3.1 General requirements
3.1.1 The medicated bath machine shall comply with the provisions of this standard and be manufactured according to the drawings and technical documents approved by the prescribed procedures. 3.1.2 The supporting power shall meet the design requirements and use requirements of the medicated bath machine itself. 3.1.3 The water pump shall be able to operate normally at the rated speed, and its flow rate and head shall comply with the provisions of Table 1 in GB5662. 3.1.4 The total capacity of the liquid medicine tank (tank) should be 5% larger than the rated capacity. 3.2 Main performance requirements
The main performance of the medicinal bath machine shall comply with the provisions of Table 1. 3.2.1 www.bzxz.net
Project name
Bath diameter
Number of sheep bathing per unit area
Time for a pure medicinal bath
Coefficient of variation of spray uniformity
Bath permeability
Number of basic operators
Average working time before the first failure
Unit of measurement
Technical indicators
≤6.3m, 2~3 people, >6.3m, 3~4 people
Note: The products in brackets are reserved.
The filter pool should be equipped with a filter with reliable performance. The mesh of the filter should be larger than 60 meshes, and the filter should be able to ensure the circulation of the liquid medicine 3.2. 2
The liquid medicine after spraying should be able to be automatically recovered into the liquid medicine pool. 3.3 Technical requirements for main parts and components
Approved by the Ministry of Machinery Industry on November 21, 1993
Implemented on March 1, 1994
JB/T7140.2-93
3.3.1 The bottom plate of the mobile medicinal bath machine and the bottom of the medicinal bath pool of the fixed medicinal bath machine should be inclined at an angle of 3° to 5° to the horizontal plane. 3.3.2 When the nozzle is spraying at the standard working pressure, except for the propulsion nozzle, the spray angles of other nozzles should be consistent, and the intersection of air jet and liquid spray is not allowed. Replacement phenomenon.
3.3.3 The height of the upper nozzle from the ground should be adjustable, and the adjustment height should be between 1200 and 3000mm. 3.3.4 The material used for the upper and lower spray racks should be hard plastic, and have certain acid, alkali and corrosion resistance. Other materials with performance not lower than that specified in this article can also be used instead.
3.3.5 The nozzle should be made of materials with strong acid and alkali resistance and high corrosion resistance. 3.4 Assembly and appearance
3.4.1 The parts and components used to assemble the medicinal bath machine must be inspected and qualified, and the purchased parts must have a certificate of qualification and be inspected by the inspection department before entering the factory. It can be assembled only after it is qualified.
3.4.2 The upper spray rack should rotate smoothly and flexibly without any jamming. 3.4.3 The connections of all fastening parts and connectors must be firm and reliable. 3.4.4 There should be no jamming or collision between the rotating parts. 3.4.5 The control valve, welded pipe fittings and pipeline elbows are not allowed to leak under normal working pressure. The bearing temperature rise shall not exceed 30℃.
The gearbox works smoothly and reliably and should be able to meet the use requirements. The weld corrugation of the welded parts should be uniform and smooth, and there should be no defects such as burn-through, missing welds, cavities, etc. 3.4.82
External The exposed non-processed surface should be smooth and neat, and there should be no obvious defects such as burrs, protrusions, depressions and pores. 3.4.92
3.4.10 Parts and components in contact with the liquid medicine should have good anti-corrosion performance, and the anti-corrosion paint layer should be selected according to the chemical-resistant coating provisions in Table 1 of JB/T5673.
4 Quality assurance period
If the user complies with the assembly, use and storage conditions specified by the manufacturer, within 1 year from the date of purchase, if the product is damaged due to poor manufacturing quality and cannot work normally, the manufacturer shall be responsible for repair, replacement (except wearing parts) and refund. 5 Test method
The performance test and production test of the drug bath machine shall be carried out in accordance with the provisions of JB/T7140.3. Other items of the drug bath machine shall be inspected in accordance with conventional methods. 6 Inspection rules
6.1 Factory inspection
6.1.1 The drug bath machine must be inspected and qualified by the quality inspection department of the manufacturer before it can be shipped, and it shall be accompanied by a product certificate. 6.1.2 Each medicinal bath machine shall be tested for operation with clean water before leaving the factory, and run at rated speed for 20 minutes, and shall meet the requirements of Articles 3.3.2 and 3.4.2 to 3.4.10 of this standard. If there is any failure, it must be repaired and qualified before leaving the factory. 6.2 Type inspection
6.2.1 The product shall be subjected to type inspection when one of the following conditions is met: a.
Test and finalization of new products or old products transferred to the factory for production; during normal production, if there are major changes in structure, materials, and processes, which may affect product performance; during normal production, type inspection shall be carried out once every 3 years; when the product is discontinued for 2 years and production is resumed;
When the national quality supervision agency proposes a type inspection requirement. 6.2.2 Sampling plan and judgment rules
6.2.2.1 The medicinal bath machine takes N=28 units (pieces) as an inspection batch. However, when sampling among users, the size of N is not limited. 6.2.2.2 The drug bath machine adopts the normal inspection sampling plan specified in GB2828 and uses the general inspection level I. 4
JB/T7140.2-93
6.2.2.3 The various inspection items of the drug bath machine are divided into Class A, Class B and Class C according to their impact on product quality. See Table 2 for the unqualified categories and Table 3 for the sampling plan.
6.2.2.4 The method of surprise sampling is adopted to randomly select samples from the batch submitted for inspection (products within the past year). 6.2.2.5 During the inspection, the inspection conclusions are made for each type of unqualified items. When the number of unqualified items in the inspected categories is less than or equal to A., the batch of products is judged to be qualified; when the number of unqualified items in any or more of the inspected categories is greater than or equal to R, the product is judged to be unqualified.
Unqualified classification
Table 2 Unqualified classification of medicinal bath machine product quality Unqualified items
Average working time before first failure
Bath penetration
Spraying wine uniformity
Time for a pure medicinal bath
Number of sheep bathing per unit area
Diameter of bathing area
Unqualified classification
Medical bath machine product sampling plan
Unqualified item classification
Number of items
Inspection level|| tt||Sample code
Sample size
Qualified quality level AQL
Marking, packaging, transportation and storage
The medicinal bath machine should be fixed with a product label in a conspicuous position, and the label should indicate: a.
Product name and model;
Matching power;
Manufacture date or factory date;
Unqualified items
Number of basic operators
3.4.10
Manufacturer name.
The medicinal bath machine can be packaged separately according to several devices, and the packaging should be firm and reliable and meet the requirements of the transportation department. The following documents should be attached to the packaging box 7.2
Product instruction manual;
Product certificate;
Packing list;
Product quality feedback form.
The box containing the product should be marked with:
Manufacturer name and address;
Product name;
Number of pieces:
Gross weight;
Consignee and address.
JB/T 7140.293
Medicinal bath machine products should be stored in a ventilated and dry warehouse. Additional notes:
This standard was proposed and managed by the Hohhot Animal Husbandry Machinery Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Hohhot Animal Husbandry Machinery Research Institute of the Ministry of Machinery Industry. The main drafter of this standard is Song Lanying.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.