GB/T 15305.3-1994 Coated abrasive belts - Dimensions and tolerances
Basic Information
Standard ID:
GB/T 15305.3-1994
Standard Name: Coated abrasive belts - Dimensions and tolerances
Chinese Name:
涂附磨具 砂带 尺寸和公差
Standard category:National Standard (GB)
state:in force
Date of Release1994-12-20
Date of Implementation:1995-09-01
standard classification number
Standard ICS number:Mechanical Manufacturing>>Cutting Tools>>25.100.70 Abrasives
Standard Classification Number:Machinery>>Process Equipment>>J43 Abrasives and Grinding Tools
Publication information
publishing house:China Standards Press
Publication date:1995-09-01
other information
Release date:1994-12-20
Review date:2004-10-14
Drafting unit:Zhengzhou Abrasives and Grinding Research Institute
Focal point unit:National Technical Committee for Standardization of Abrasives and Grinding Tools
Proposing unit:Ministry of Machinery Industry of the People's Republic of China
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard specifies the width and circumference of abrasive belts, their limit deviations and the selection of width and circumference combinations. This standard applies to abrasive belts with joints. GB/T 15305.3-1994 Dimensions and tolerances of coated abrasive belts GB/T15305.3-1994 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Coated abrasives Abrasive belts-Dimensions and tolerances
Coated abrasives Abrasive belts-Dimensions and tolerances
This standard is equivalent to the international standard ISO1929-1993 "Abrasive belts--Selection of width and length combination".
1 Subject content and scope of application
GB/T 15305.3-94
-Marking, dimensions and tolerances" and ISO2976-1973 Abrasive belts This standard specifies the dimensions of the width and circumference of the abrasive belts and their limit deviations and the selection of the width and circumference combination. This standard applies to abrasive belts with joints.
2 Basic dimensions and limit deviations
2.1 The width 6 and limit deviations shall comply with the provisions of Table 1. Table 1
Basic dimensions
Limit deviation
Basic dimensions
Limit deviation
2.2 Circumference 1 and its limit deviation shall comply with the provisions of Table 2. Approved by the State Bureau of Technical Supervision on December 20, 1994 280
Basic size
Limit deviation
Basic size
Limit deviation
1995-09-01 implementation
3 Size combination
GB/T15305.3-94
Limit deviation
6≤1000
6>1000
Limit deviation
b≤1000
6>1000
11 200
The combination of belt width and circumference shall comply with the provisions of Table 3 and Table 4. Users should give priority to the belt sizes specified in Table 3, and Table 4 is the supplementary belt sizes.
250031504000
630080001000012500
GB/T15305.3-94
Continued Table 3
1000012500
0005000
475520
Additional notes:
GB/T15305.3—94
16501800/182019002000|2030/21002300|2500/2620|280033503810[1 300|1
This standard is proposed by the Ministry of Machinery Industry of the People’s Republic of China. xbzxZ.net
This standard is under the jurisdiction of the National Technical Committee for Standardization of Abrasives and Grinding Tools. This standard was drafted by the Zhengzhou Abrasives and Grinding Research Institute.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.