Machinery Industry Standard of the People's Republic of China Double plus chains Subject content and scope of application JB/T7364-94 This standard specifies the structural type, basic parameters and dimensions, marking, logo, packaging, transportation and storage requirements of double plus chains. This standard is applicable to various types of stationary conveyors. 2 Reference standards GB1243.1 Short pitch precision roller chains for transmission GB1244 Short pitch precision roller chains and sleeve chains for transmission Sprocket tooth shape and tolerance GB5269 Double pitch precision roller chains and sprockets for transmission and transportation GB 9785 Terms of chains and sprockets 3 Structural type 3.1 Whole chain The structural type of the chain is shown in Figure 1. 3.2 Rollers and rollers Inner chain plate Sleeve outer chain plate The rolling part in the middle of the chain plate consists of rollers and rollers, and its structural type has two types as shown in Figures 2a and 2b. The roller contacts the tooling plate, and the roller contacts the sprocket tooth corridor and the track. Approved by the Ministry of Machinery Industry of the People's Republic of China on July 26, 1994 and implemented on July 1, 1995 3.3 Locking parts JB/T7364-94 The type of locking parts is shown in Figure 3, and it is recommended to use a door opening pin. 2) Split pin Basic parameters and dimensions b) Elastic locking plate The double-speed conveyor chains specified in this standard are divided into 2.5-speed conveyor chains and 3-speed conveyor chains. Their dimensional parameter codes are shown in Figures 1 and 3. The specifications and basic parameters of 2.5-speed conveyor chains are shown in Table 1: the specifications and basic parameters of 3-speed conveyor chains are shown in Table 2. Table 1 RS25-C206B BS25-C208A 13S25-C210A BS25-C212A BS25-C216A (rnax) (max)(n (meix) BS30-C2 06B BS30-C208A BS30-C210A BS30-C212A BS30-C216A (max) JB/T7364-94 Note; 2.5 The chain number of the double-speed and triple-speed conveyor chains is the number of the corresponding double-pitch roller chain for conveying, with the letters "BS\ and "10×speed" in front and connected with " ·mark ". Model representation method: Standard number One whole chain section One chain number Marking example: A triple-speed conveyor chain with a pitch of 38.1mm and a whole chain of 84 sections is marked as BS30-C212AX84JB/T7364--94 6 Marking, packaging, transportation, storage 6.1 The outer link plate of the chain and the outer side of the connecting chain plate should have the chain number, manufacturer's trademark or factory 6.2 After the chain is cleaned and treated with rust prevention, it is packaged with moisture-proof and waterproof packaging materials. The specifications of the chains in the same packaging unit must be the same, and a product certificate must be attached. The product will not rust within one year from the date of leaving the factory under normal transportation and storage conditions. 6.3 The outer wall of each packaging unit should be marked with: a. Product name and chain number; Manufacturer number; Quantity; Net weight and gross weight;wwW.bzxz.Net Packaging, storage and transportation graphic marks: Manufacturer name; Manufacturer date. JB/T7364--94 Appendix A (Examination item)||t t||The diameter, tooth height and tooth groove shape of the sprocket shall comply with the provisions of GB5269. A1 The axial tooth profile and dimensions of the sprocket shall comply with the provisions of Figure A1 and Table A1. A2 The preferred effective number of teeth: 5, 7, 8, 9, 10 and 11.62 BS25-C206B BS25-C208A (Hx) BS25-C210A BS25-C212A BS25-C216A BS30-C206B BS30-C208A .111.4 JB/T 7364--94 Continued Table A1 BS30 C210A BS30-C212A RS30-C216A Additional Notes: JB/T7364 Continued Table A1 This standard was proposed and managed by the Chain Transmission Research Institute of Jilin University of Technology. 94 (max) This standard was drafted by Suzhou Special Chain Factory, Chain Transmission Research Institute of Jilin University of Technology, and Jiangnan University. The main drafters of this standard are Li Daxiong, Shang Dengcai, Bao Weilie, Huang Xianghong, and Meng Xiangbin. 282 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.