Some standard content:
Chemical Industry Standard of the People's Republic of China
HG2179 91
Rubber Coated Fabric Insulation Tape
Published on 1991-12-23
Ministry of Chemical Industry of the People's Republic of China
Implementation on 1992-05-01
Chemical Industry Standard of the People's Republic of China
Rubber Coated Fabric Insulation TapeWww.bzxZ.net
1 Subject Content and Scope of Application
HG2179-91
This standard specifies the specifications, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage requirements of rubber coated fabric insulation tape (abbreviated as insulation tape) for electrical use. This standard applies to insulation tape made of fiber fabric coated with insulating rubber. It can be used for wrapping and protective insulation of general wires and cables of 380V and below in a temperature environment of -10 to +40C. 2 Reference standards
GB5569 Determination of physical properties of insulating tape GB7537 Accelerated aging test for rubber-coated fabrics GB7539 Standard environment for storage and testing of rubber-coated fabrics 3 Product specifications and dimensions
The specifications and dimensions of insulating tapes shall comply with the provisions of Table 1. 3.1
Table 1 Specifications and dimensions
Length, m2
Width, mm
Note: Other specifications of insulating tapes (including length, width and thickness) are allowed to be agreed upon by the supply and demand parties. 4 Technical requirements
Thickness, mm
0.30±0.05
0.30±0.05
4.1 Voltage resistance of insulating tape: It should not be broken down when it is kept under 1000Y AC voltage (frequency is 50HZ) for 1min. 4.2 Adhesion performance of insulating tape: Under the falling load specified in Table 2, the relative detachment length of the sample within 1min shall not exceed 50% of the total bonding length.
Approved by the Ministry of Chemical Industry of the People's Republic of China on December 23, 1991 and implemented on May 1, 1992| |tt||Width, mm
HG2179-91
Falling load
Falling load, name
4.3 From the date of manufacture to 8 months, the adhesion performance of the insulating tape after 70×24h aging shall be under the falling load specified in Table 3, and the relative detachment length of the sample within 1 minute shall not exceed 50% of the total bonding length; from the date of manufacture, more than 8 months to 15 months, the adhesion performance after 70×24h aging shall be under the falling load of 50% specified in Table 3, and the relative detachment length of the sample within 1 minute shall not exceed 50% of the total bonding length Table 3 Falling load
Width, mm
4.4 The insulating tape should not have any corrosive effect on the metal (copper, aluminum) wire. Table 4 Appearance quality
5 Test method
Defect name
Disk gap
Double-pole attenuation
Disk surface is not
Four () centers
Light-proof point
Falling load, g
Not allowed
The gap width is not more than 1mm,
The total length of both sides is not more than 15cm
Not allowed The height difference in the same plane shall not exceed 1mm. The height difference at the four (four) centers shall not exceed 2mm. No more than 5 points in an area of 0.02㎡ are allowed. 5.1 Sampling method: The sample must be cut from a distance of not less than 1m from the top of the coil. The test can be carried out after being placed in standard environment A specified in GB7539 for 24h. 5.2 Visual inspection shall be used for appearance quality. 5.3 Defective dimensions shall be inspected with measuring instruments. Length and width shall be measured with a ruler and a vernier caliper. 5.4 Thickness, according to the provisions of Chapter 3 of GB5569 2
HG2179-91
5.5 Withstand voltage, according to the relevant provisions of Chapter 7 of GB5569 5.6 Adhesion, according to the relevant provisions of Chapter 4 of GB5569. 5.7 Metal corrosion performance, according to the relevant provisions of Chapter 5 of GB5569 5.8 Light transmission point inspection, according to the relevant provisions of Chapter 6 of GB5569 5.9 Debonding inspection, from the original insulating tape, pull out 0.5m length continuously within 1s for observation 5.10 Aging test, according to GB7537 and GB5569 6 Inspection Inspection rules
6.1 The insulating tape shall be inspected and accepted in batches and shall have the inspection certificate issued by the production inspection department. 6.2 The maximum number of each batch of insulating tape is 20,000 reels. Products of different specifications can be classified as one batch. 6.3 The appearance quality of the insulating tape shall be 100% inspected according to the serial numbers 3.4.5.6 in Table 4. 6.4 At least 3 reels of samples shall be taken from each batch of insulating tape, and each reel shall be inspected for specifications, size, withstand voltage performance, adhesion performance and items 1, 2, 7, and 8 in Table 4.
6.5 The adhesion performance of the insulating tape after aging and the corrosion performance test on metal shall be inspected regularly, but not less than once a month. Each sample shall not be less than 3 reels, and each reel shall be tested once. 6.6 When the insulating tape is inspected according to the inspection items specified in 6.4 and 6.5, if one of the results is unqualified, double samples shall be taken from the batch of products to repeat the test. If one item or one sample is still unqualified after the retest, the batch of products shall be unqualified. 6.7 The user has the right to inspect the product quality in accordance with the provisions of this standard. 7 Marking, packaging, transportation and storage
7.1 Each insulating tape shall be packed with wax paper or plastic film before packing, and printed with the product name, standard number, trademark, product specifications, manufacturer name, and manufacturing date.
7.2 The insulating tape shall be packed according to the same specifications, and each box shall be accompanied by a product certificate. The packaging box shall indicate: product name, standard code, trademark, product specifications, quantity, batch number, volume weight, manufacturer name, production date and sun protection and moisture-proof marks. 7.3 The manufacturer name, manufacturing date and trademark shall be printed on the paper core of each insulating tape. 7.4 The insulating tape shall be stored at -10~+30℃ and relative humidity not more than 80%, and shall be at least 1.5m away from the heat source. 7.5 The insulating tape shall be stacked at a distance of at least 0.2m from the ground and the wall. The stacking height shall be based on the principle of not crushing the bottom product and ensuring heat dissipation.
7.6 During transportation and storage, the insulation tape should be kept away from direct sunlight, moisture, and should not come into contact with substances harmful to fabrics and rubber.
7.7 Under the conditions specified in 7.4, 7.5, and 7.6 of this standard, the product storage period is 8 months. Additional remarks:
This standard was proposed by the Science and Technology Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee on Rubber and Rubber Products Standardization. This standard was drafted by the Shenyang Rubber Industry Products Research Institute of the Ministry of Chemical Industry. The main drafter of this standard is Xu Songrui,
People's Republic of China
Chemical Industry Standards
Rubber Coated Fabric Insulation Tape
HG2179-91
Editor: Chemical Industry Standards Editorial Department
(Standardization Research Institute of the Ministry of Chemical Industry)
Postal Code: 100013
Printing: Standardization Research Institute of the Ministry of Chemical Industry
Copyright reserved. No reproduction allowed
Format: 880×12301/16: Printing Sheet
Word Count: 6000
First Edition in November 1992
First Printing in November 1992
Print Quantity: 1500
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.