title>GB/T 15224.3-1994 Coal quality classification Coal calorific value classification - GB/T 15224.3-1994 - Chinese standardNet - bzxz.net
Home > GB > GB/T 15224.3-1994 Coal quality classification Coal calorific value classification
GB/T 15224.3-1994 Coal quality classification Coal calorific value classification

Basic Information

Standard ID: GB/T 15224.3-1994

Standard Name: Coal quality classification Coal calorific value classification

Chinese Name: 煤炭质量分级 煤炭发热量分级

Standard category:National Standard (GB)

state:Abolished

Date of Release1994-09-24

Date of Implementation:1995-08-01

Date of Expiration:2004-10-01

standard classification number

Standard ICS number:Mining and Mineral Products >> 73.040 Coal

Standard Classification Number:Mining>>Solid Fuel Mines>>D20 Solid Fuel Mines Comprehensive

associated standards

alternative situation:Replaced by GB/T 15224.3-2004

Publication information

other information

Review date:2004-10-14

Drafting unit:Beijing Coal Chemistry Research Institute, China Coal Research Institute

Focal point unit:National Coal Standardization Technical Committee

Introduction to standards:

GB/T 15224.3-1994 Coal quality classification Coal calorific value classification GB/T15224.3-1994 Standard download decompression password: www.bzxz.net

Some standard content:

National Standard of the People's Republic of China
Classification of coal quality
Classification of coal calorific value
Classification for quality of coal-Classificationfor calorific yalue of coal
Subject content and scope of application
This standard specifies the classification and naming of coal according to the range of received base lower calorific value (Qe.ar). This standard applies to power coal and civilian coal. 2 Classification of coal calorific value
Coal calorific value is classified according to the following table
Name
Low calorific value coal
Medium-low calorific value coal
Medium calorific value coal
Medium-high calorific value coal
High calorific value coal
Extra-high calorific value coal
Note: When the coalfield geological exploration system is classified according to calorific value, the total moisture (M) can be used for calculation. Additional remarks:
This standard is proposed by the Ministry of Coal Industry of the People's Republic of China. This standard is under the jurisdiction of the National Coal Standardization Technical Committee. This standard was drafted and interpreted by the Beijing Coal Chemistry Research Institute of the China Coal Research Institute. The main drafters of this standard are Chen Wenmin, Liu Shuyun and Wang Zhiling. Approved by the State Bureau of Technical Supervision on September 24, 1994 18
GB/T 15224.3--94
Calorific value (Qetar) range, MJ/kg
8.50~12.50
12.51~17.00 wwW.bzxz.Net
17.01~~21.00
21. 01~24. 00
24. 01~~27.00
Implementation on August 1, 1995
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.