title>Subdivision and numbering for the national primary scale topographic maps - GB/T 13989-1992 - Chinese standardNet - bzxz.net
Home > GB > Subdivision and numbering for the national primary scale topographic maps
Subdivision and numbering for the national primary scale topographic maps

Basic Information

Standard ID: GB/T 13989-1992

Standard Name:Subdivision and numbering for the national primary scale topographic maps

Chinese Name: 国家基本比例尺地形图分幅和编号

Standard category:National Standard (GB)

state:Abolished

Date of Release1992-01-02

Date of Implementation:1993-03-01

Date of Expiration:2012-10-01

standard classification number

Standard ICS number:Mathematics, Natural Sciences >> 07.040 Astronomy, Geodesy, Geography

Standard Classification Number:General>>Surveying and Mapping>>A79 Map Printing

associated standards

alternative situation:Replaced by GB/T 13989-2012

Publication information

publishing house:China Standards Press

Publication date:1993-03-01

other information

Release date:1992-12-17

Review date:2004-10-14

drafter:Jiang Zhiyi, Lü Yuxia, et al.

Drafting unit:National Administration of Surveying, Mapping and Geoinformation Standardization Institute

Focal point unit:National Geographic Information Standardization Technical Committee

Proposing unit:National Bureau of Surveying and Mapping

Publishing department:State Bureau of Technical Supervision

competent authority:National Bureau of Surveying and Mapping

Introduction to standards:

This standard specifies the framing, numbering and numbering formulas for the national basic scale topographic maps. This standard applies to the framing and numbering of topographic maps with a scale of 1:1 000 000 to 1:5 000. GB/T 13989-1992 Framing and numbering of national basic scale topographic maps GB/T13989-1992 Standard download decompression password: www.bzxz.net
This standard specifies the framing, numbering and numbering formulas for the national basic scale topographic maps. This standard applies to the framing and numbering of topographic maps with a scale of 1:1 000 000 to 1:5 000.


Some standard content:

National Standard of the People's Republic of China
Subdivision and numbering for the national prlmaryscale topographic maps
1 Subject content and scope of application
This standard defines the framing, numbering and numbering formula for the national basic scale topographic maps. This standard applies to the framing and numbering of topographic maps of 1:1000000 to 1:5000. 2 Referenced standards
GB12409 Geographic Grid
3 Framing of topographic maps
GB/T 13989--92
All basic scale topographic maps in my country are based on 1:1000000 topographic maps, and the map sheets are divided according to the specified longitude and latitude differences. The framing of 1:1000000 topographic maps adopts the international 1:1000000 map framing standard. The range of each 1:1000000 topographic map is 6° longitude and 4° latitude. The range between 60° and 76° is 12° longitude and 4° latitude. The range between 76° and 88° is 24° longitude and 4° latitude. There are no maps above 60° latitude that need to be combined in my country. Each 1:1000000 topographic map is divided into 2 rows and 2 columns, with a total of 4 1:500000 topographic maps. The range of each 1:500000 topographic map is 3° longitude and 2° latitude.
Each 1:1000000 topographic map is divided into 4 rows and 1 column. There are 16 11250000 topographic maps in total. The range of each 1:250000 topographic map is 1°30° longitude difference and 1° latitude difference. Each end of 111000000 topographic map is divided into 12 rows and 12 columns, with a total of 144 1:100000 topographic maps. The range of each 1:100000 topographic map is 30° longitude difference and 20° latitude difference. Each 1:1000000 topographic map is divided into 21 rows and 24 columns, with a total of 576 1:50000 topographic maps. The range of each 1:50000 topographic map is 15° longitude difference and 10° latitude difference. Each 1:1000000 topographic map is divided into 48 rows and 48 columns, with a total of 2304 125000 topographic maps. The range of each 1:25000 topographic map is 7'30\ latitude difference 5°. Each 1:1000000 topographic map is divided into 96 rows and 96 columns, with a total of 9216 1:10000 topographic maps. The range of each 1:100000 topographic map is 3°45″ longitude difference 2'30\. Each 1:1000000 topographic map is divided into 192 rows and 192 columns, with a total of 36864 115000 topographic maps. The range of each 1:5000 topographic map is 1'52,5 \, latitude difference 115\. The latitude and longitude difference, number of rows and columns and number of sheets of topographic maps of different scales are in a simple multiple relationship (see Table 1). Approved by the State Bureau of Technical Supervision on December 17, 1992 and implemented on July 1, 1993
Scale
Number of rows and columns
Quantitative relationship
Number of sheets
Explicit relationship
4 Numbering of topographic maps
1 000 000
500000
4.11: 1000000 Topographic map number
GB/T 1398992
250 000
1°30r
100000
50 000
25 000||tt ||10 The numbering of 000
111000000 topographic maps adopts the international 1:1000000 map numbering standard. Starting from the equator, each latitude difference of 1 is a row, and the north and south pure 88° are divided into 22 rows, and the corresponding row numbers are represented by uppercase Latin letters (character codes) A, B, C-.V. Starting from the 180° longitude, each longitude difference of 6° from west to east is a column, and the world is divided into 60 columns, and the corresponding column numbers are represented by Arabic numerals (digital codes) 1.23, *****60. Each trapezoidal grid surrounded by longitude and latitude (see Figure 1) is a 1:1000000 topographic map, and their numbers are composed of the row number and column number of the map. For example, the map number of Beijing's 1:1000000 topographic map is 50. H
GB/T 13989—92
Figure 1 Northern Hemisphere 1:1000000 Topographic Map Sheet No. 50
1:1000000 Map
Sheet Row Number (Character Code)
11000000 Topographic Map
Sheet Column Number (Mathematical Code)
my country is located north of the equator in the Eastern Hemisphere (see Figure 2). The map sheet is within the range of longitude 72°~138° and latitude 0~56°, including 14 rows with row numbers A, B, C,..-N and 11 columns with column numbers 43,44....·-53. 8
GB/T13989—92
72”8*84° 50* 96* 102 108*114-1211264145
464748
Figure 2 Numbering of the 11000000 topographic map of China 4.21:50000015000 topographic map numbering The numbering of 1500000~15000 topographic maps is based on the numbering of 1:1000000 topographic maps, using the row and column numbering method (see Figure 3). That is, the longitude and latitude differences of the topographic maps of each scale contained in the 111000000 topographic map are divided into rows and columns, with rows from top to bottom and columns from left to right. To be represented by three Arabic numerals (digital codes) in order, if less than three digits are added in front, the row number is arranged in the first place and the column number is arranged in the last place. Different characters are used as the scale code of each scale topographic map (see Table 2). The map numbers of 1:500000~15000 topographic maps are composed of the map number of the 1*1000000 topographic map, the scale code and the row and column numbers of each map sheet, a total of 1 digit code.
1:100000 topographic map
Map sheet row number (character code)
1:1 000 000 Topographic map
Sheet column number (digital code)
Scale code
Sheet column number (digital code)
Sheet row number (digital code)
1001100
6012025
0070125
1002005
003008
0120245
D130251040:09
01836072114
0041011
024048
AN6192
[][ 2[
Scale any
1:500000
up++++up
11250000
GB/T 13989—92
048049
1100000
Example 1: 1:500000 topographic map number (see Figure 4) The halo line shows the map number J50B001002
04449
Longitude difference R
1:50 000
++ 111
1:25000
1:10 00%
--- 192
1:5000
GB/T 13989--92
002001
Example 2: The number of the topographic map 1125000 (see Figure 5) is shown by the halo as J50C003003
002001
003001
(h4101
001002001013
002002502003Www.bzxZ.net
002004
f3003003004
003002
114 \115\30\
Example 3: 1:100000 topographic map number (see Figure 6)) The single oblique shading line shows the map number J50D010010Example 4: 150000 topographic map number (see Figure 6) The double shading line shows the map number J50E017016
Example 5: 1:25000 topographic map number (see Figure 6) The parallel shading line shows the map number J50F042002Example 6: 1:10000 topographic map number (see Figure 6) The black block shows the map number 150G093004
Example 7:1 1 5 000 Topographic map numbering
DNE 4GHORS
004004
118\30
1:1(000000 Topographic map sheet The southeasternmost 1:5000 Topographic map sheet is 150H1921925 Numbering formula
GB/T 139B9—92
5.1 Given the longitude and latitude of a point within the sheet or the longitude and latitude of a point in the southwest gallery of the sheet, calculate its number a, and calculate it according to the following formula 1:1000000 Topographic map sheet numbering: α =[/]+1
h - [A/6° + 31
In the formula, []——indicates the quotient is rounded;
1: The digital code corresponding to the character code of the latitude band of the topographic map sheet:6—1: The digital code of the longitude band of the topographic map sheet;L—The longitude of a point in the sheet or the longitude of the southwest outline point of the sheet:d
The latitude of a base point in the sheet or the latitude of the southwest corridor point of the sheet. Example 1: The longitude of a point is 114 33°45\, latitude is 39°22°30\, calculate the number of the map sheet it is on. =[39°22'30\/4°]+1=10(Ning Fu Code J)$-[114°33'15\/6']+31=50
The number of the 1:1000000 topographic map where this point is located is J50b. Calculate the row and column numbers after the number of the 1:1000000 topographic map of the required scale according to the following formula: c = 4°/p -[(/4°)/AP]
d -[(A/6°)/AA] + 1
In the formula: ()——represents the remainder of the quotient:
[——-represents the integer of the quotient;
——the row number after the map number of the required scale topographic map in 1:1000000: 4-the column number after the map number of the required scale topographic map in 1:1000000; r(1)
(3)
GB/T 13989—92
-the longitude of a point in the map or the longitude of the magic point in the southwest of the map; —the latitude of a point in the map or the latitude of the gallery point in the southwest of the map, A——the longitude difference of the scale topographic map; —the line difference of the scale topographic map. Still taking a point at longitude 114°33°45\latitude 39°22°30\ as an example, calculate the number of each scale topographic map. Example 2: The number of the 11500000 topographic map
=2″ 41-30
c=1°/2°--[(39°22'30\/4°}/2\]-2—[3\22'30\/2\]
d--[(114°33'45\/6°)/3°]+1=[33'45\/3']+1
1: The number of the 500000 topographic map is J50B001001 Example 3: 1+250000 topographic map number
=1+=130
c- 4/1°—[(39°22' 30\/4°)/1\]=4—[3°22'30\/1°]
d =[(114°33'45\/6\)/1°30'+1=「33'45\/1'30']+1
1: The map number of the 250000 topographic map is 150C001001 Example 4: 1: The number of the 100000 topographic map
Ag-20; A=30
c=4°/20'-[<39°22'30\/4°}/20\]-12—[3°22'30′\/20']
d =[(114'33'45\/6°)/30′]+1-[33'45\/30′+1
The map number of the 1:100000 topographic map is J50D002002 Example 5: The map number of the 1:50000 topographic map
—1015
=4°/10′-[(39°22'30\/4°)/10′ ]=24—[3°22'30\/10'
d-[(114°33'45\/6°)/15\]+1=[33'45\/15']+1
—003
The number of the 150000 topographic map is J50E004003 Example 6.1: The number of the 25000 topographic map
Ap=5 A1=7'30
—4°/5\--[[<39\22'30\/4\>/5\]=48—[322'30\/5']
d =[(314°83'45\/6°)/7'30]+1=[33'45\/7'30\]+1
GB/T 13989-92
1: The number of the 25000 topographic map is J50F008005 Example 7: 1: The number of the 10 000 topographic map
Ag - 2'30\+4-3' 45\
c =1/2'30′-[(39°22' 30\/1°}/2' 30\]=96—[3°22'30\/2'30\
dL(114°33'45\/6\)/3'45\|+1-[33'45\/3'45\7+1
The map number of 1:10000 topographic map is J50G015010 Example 8: The number of 1:5000 topographic map
-1'15\*2-152.5\
-- 4°/1'15\--[(39°22'30\/4°)/1'15\]=192-[3*22'30\/1'15”
d =[(114°33'45\/6°)/1'52. 5\]+1=[33'45\/1'52. 5\+1
1: The map number of the 5000 topographic map is J50H0300195.2. Given the map number, calculate the longitude and latitude of the map point in the south of the map sheet. Use the following formula to calculate the longitude and latitude of the map point in the south of the map sheet; A - (h - 31) × 6° +(± =1) X ±=(a 1) X 4\+(4/A- c) X Ap In the formula: 1—the longitude of the southwest outline point of the map sheet; the latitude of the southwest outline point of the map sheet;
-1:1000000 topographic map sheet where the latitude band character code corresponds to the digital code; h
-1:1000000 topographic map sheet where the longitude band digital code; the row number of the scale topographic map after the map number of the 1:1000000 topographic map: d-—the column number of the scale topographic map after the map number of the 111 000 000 topographic map; AA——the longitude difference of the scale topographic map sub-frame; ——the latitude difference of the scale topographic map sub-frame. Example 1: Map number J5013001001, find the longitude and latitude of its southwest outline point. Q =10;§=50;c=1;d=1;4=2;41= 3x =(50—31)× 6\+(1—1)×3°-114°
#=(10—1)X4°+(4°/2°-1)X2°-38°
(6)
GB/T13989-92
The longitude and latitude of the southwest point on this map are 114°, 38°2: Map number J50T>002002. Find the longitude and latitude of the southwest point. -:106—50:c-2:d=2:4020 44=30a =(50—31)X6°+(2—1)×30
=114°30°
+ =(10-1) ×4°+(4/20°—2)×20=39°20
The longitude and latitude of the southwest map point of this map sheet are 114°30 and 39°205.3. Conversion of the row and column relationship of topographic maps of different scales within a 1:1000000 topographic map sheet 5.3.1 The row and column numbers of the larger scale topographic maps contained in the row and column numbers of the smaller scale topographic map are calculated by the following formula: = / × (csmall — 1)+ 1
d / × (dh 1) +1
The row and column numbers of the southeastern corner of the map are calculated by the following formula: C=small, ×/
Wuzhong: c
row number after the map number of 11000000 topographic map of the larger scale topographic map column number after the map number of 1:1000000 topographic map: row number after the map number of 1:1000000 topographic map of the smaller scale topographic map: column number after the map number of 1:1000000 topographic map of the smaller scale topographic map: d
latitude difference of the larger scale topographic map slice, Ap
latitude difference of the smaller scale topographic map slice. Example: The row and column numbers of the 1:100000 topographic map are 004001. Find the row and column numbers of the 1:25000 topographic map. —4#1,20°,5
The row and column numbers of the northwest corner map:
t*=20/5×(4—1)+1
d=20° /5' ×(1-1)+1
The row and column numbers of the southeast corner map!
C—4×20°/5
d*=:1×20°/5
The row and column numbers of the 125000 topographic map are: 013001
014001
015001
016001
013002
014002
015002
016002
013003|| tt||014003
015003
016003
013004
014004
015004
016004
(10)
5.3.2 Calculate the row and column numbers of the larger scale topographic map to which it belongs The row and column numbers of the smaller scale topographic map are calculated as follows:
c = [c /( /x+ 1
] Where: [—
- indicates that the quotient is rounded;
GB/T 13989—92
d=[/+
a row number after the map number of a 1:1000000 topographic map on a smaller scale: d small—the engraved number after the map number of a 1:1000:000 topographic map on a smaller scale;——-a row number after the map number of a 1:1000000 topographic map on a larger scale: 4x—the column number after the map number of a 1:1000000 topographic map on a larger scale 1 small latitude difference of a framing ... 20, =
=[16/(20°/5\)]
Note, 1) If the previous item has a remainder of 10, and 1+ is added without a remainder, then 1 is not added. d small = [4/(20°/5°)]]
C—133
small[[13/(20/5\)]-+]
d show = [3/(205/5')]+1
The row and column numbers of the 1:25000 topographic map with row and column numbers of 016004 and 013003 belong to the 1:100000 topographic map, and both the row and column are 004001.
Additional explanation,
This standard is proposed and managed by the State Administration of Surveying, Mapping and Geoinformation. This standard is drafted by the Surveying and Mapping Standardization Institute of the State Administration of Surveying, Mapping and Geoinformation. The main drafters of this standard are Jiang Xiangluan, Jiang Zhiyi and Lu Yu.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.