This standard gives good practice for all elements of conformity assessment activities, including normative documents, organizations, systems and programs, as well as results. This standard is intended for use by individuals and organizations who wish to provide, promote or use ethical and reliable conformity assessment services. This standard is formulated to promote international, regional, national and local trade. GB/T 27060-2006 Good Practice for Conformity Assessment GB/T27060-2006 Standard download decompression password: www.bzxz.net
This standard gives good practice for all elements of conformity assessment activities, including normative documents, organizations, systems and programs, as well as results. This standard is intended for use by individuals and organizations who wish to provide, promote or use ethical and reliable conformity assessment services. This standard is formulated to promote international, regional, national and local trade.
This standard is equivalent to ISO/IEC Guide 60-2004 "Conformity Assessment - Good Practice".
This standard has made editorial revisions to the international standards or guides listed in the "References" of ISO/IEC Guide 60-2004. For those with corresponding national standards, the numbers and names of the national standards have been adopted.
This standard was proposed and managed by the National Technical Committee for Certification and Accreditation of Standardization (SAC/TC 261).
The drafting organizations of this standard are: China National Accreditation Service for Conformity Assessment, China Certification and Accreditation Association, China Quality Certification Center, Guangzhou Electric Science Research Institute.
The main drafters of this standard are: Song Guilan, Zhang Mingxia, Liu Ping, Zhu Huiming, Wu Guoping, Zhu Xingrong, Li Shuang.
GB/T 27000 Conformity assessment vocabulary and general principles (GB/T 27000-2006, ISO/IEC 17000:2004, IDT)
Foreword I
Introduction II
1 Scope1
2 Normative references1
3 Terms and definitions1
4 Good practice principles for conformity assessment1
4.1 Overview1
4.2 Conformity assessment normative documents1
4.3 Conformity assessment activities1
4.4 Conformity assessment systems and schemes2
4.5 Conformity assessment results2
References3

ICS03.120.20
National Standard of the People's Republic of China
GB/T 27060--2006/ISO/1EC Guide 60:2004 Conformity Assessment
Good Practice
Conformity assessment-Code of good practice(IS0/IFC Guide 60:2004,IDr)
Published on 2006-12-20
Digital
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Administration of Standardization of the People's Republic of China
Implemented on 2007-06-01
GB/T 27060—2006/IS0/1EC Guide 60:2004
Normative references
3 Terms and definitions
4 Conformity assessment operating principles
Conformity assessment normative documents bzxz.net
4.3 Conformity assessment activities
4.4 Conformity assessment system and plan
4.5 Conformity assessment results
References
-iKANKAca-
CB/T 27060—2006/ISO/IEC Guide 60:2004 Foreword
This standard is equivalent to ISO/IEC Guide 69:2004x Contains the operating rules for qualified assessment
This standard has made editorial changes to the international standards or guidelines listed in ISO/IEC Guide 60:2001\References\. For those with corresponding national standards, the numbers and names of the national standards are used. This standard was proposed and managed by the National Technical Committee for Certification and Accreditation of Enterprises (SAC[C261]. This standard was drafted by the China Certification and Accreditation National Accreditation Center. This standard was drafted by: China National Accreditation Service for Conformity Assessment, China Certification and Accreditation Association, China Quality Certification Center, Guangzhou Electric Science Research Institute. The main drafters of this standard are: Mi Guilan, Zhang Mingxia, Liu Ping, Wei Huiming, Ling Guoping, Niu Xingmo, Li Shuang GB/T 27060—2006/IS0/[EC Gulde 60:2004 Introduction Conformity assessment refers to the activities of proving whether a product, process, system, person or organization meets specified requirements. Conformity assessment includes activities that provide various types of assurance, that is, to ensure that a product, process, system, person or organization meets the requirements specified in the specification, such as international, regional or national standards, guidelines or other normative documents. The rapid development of technology, the integration of economic and production systems, and the development of international trade have increasingly emphasized the commonality of quality assessment procedures and systems. International standards have been increasingly widely accepted as an effective tool to enhance competition and eliminate technical trade barriers. However, the use of harmonized international standards for conformity assessment has been slow to develop, and different standards and approaches still exist. This situation may result in additional costs for producers, exporters and consumers, and poses a challenge to all national regulatory agencies and industries, including developing countries. At the same time, the development of regional and sector-specific conformity assessment systems and schemes is also of great importance. These systems continue to develop and build confidence among users of conformity assessment services (including industry, regulators and consumers), promoting global acceptance through a unified approach. In addition, the use of Declarations of Conformity (T)oCs) continues to increase in many product areas: due to differences in conformity assessment procedures and requirements, the lack of recognition of conformity assessment results can limit the flow of products and services. Efforts are needed to ensure that conformity assessment systems and procedures are non-discriminatory, transparent and avoid unnecessary barriers to trade. Members in the field of conformity assessment are encouraged to participate in the development of international standards and guidelines and use them as the basis for conformity assessment activities and systems, to exchange information and build confidence, to enhance understanding, and to accept other systems and methods. This standard is compiled in a way that is suitable for use by international, regional, national or regional, governmental or non-governmental conformity assessment bodies, accreditation bodies and other interested parties. This standard is used in conjunction with international standards or guidelines related to conformity assessment, national standards, or in the development of international standards or guidelines related to conformity assessment. It can also be used in conjunction with the Technical Barriers to Trade (TBT) Agreement of the World Trade Organization (WTO).
The adoption of this international standard is voluntary and aims to promote openness, transparency, fairness, confidentiality, consistency and effectiveness of conformity assessment operations. 1 Scope
GB/T27060—2006/1S0/1EC Guide 60:2004 Good Practice for Conformity Assessment
This standard provides good practice for all elements of conformity assessment activities, including normative documents, organizations, systems and programs, as well as results.
This standard is intended for use by individuals and organizations who wish to provide, promote or use ethical and reliable conformity assessment services. This includes regulatory bodies, trade organizations, calibration laboratories, testing laboratories, inspection bodies, product certification bodies, management system certification bodies, personnel certification bodies, certification bodies, organizations that provide declarations of conformity, designers and managers of conformity assessment systems and programs, and the purpose of conformity assessment
This standard has been prepared with the aim of promoting international, regional, national and local trade. 2 Normative references
The following references are essential for the application of this standard. For all referenced documents with dates, only the referenced version is applicable; for all referenced documents without dates, the latest version shall apply to this standard (including all revisions) GB/T27000-2006 Principles of coordination and application of conformity assessment (IS0/IEC170002:04, IT)T) Note: Other 1/[1 international standards, referenced documents are listed in the references. 3 Terms and definitions
This standard adopts the terms and definitions given in G3/12700. 4 Principles of good operation of conformity assessment
4.1 Overview
The general principles related to good operation of conformity assessment include four aspects: 1) Normative documents of conformity assessment; 2) Conformity assessment activities; 3) Conformity assessment system and plan; 4) Conformity assessment results. 4. 2. Normative documents for conformity assessment
Normative documents for conformity assessment (such as standards, guidelines and procedures) used by conformity assessment bodies and accreditation bodies in their work and activities should be
e) formulated in a transparent, open, fair and consistent manner; h) adapted to legal concepts and market needs; c) technically feasible;
|) where applicable, clarify the technical capacity requirements for relevant institutions; avoid unnecessary barriers to trade and reflect the principles of non-discrimination and national treatment: ||tt| ... ; g) Consider the participation and use of developing countries. 4.3 Conformity assessment activities
All organizations involved in conformity assessment activities, including conformity assessment bodies and accreditation bodies, shall: a) Whenever possible, carry out conformity assessment activities in accordance with international standards and guidelines that have been agreed upon, such as ISO/IF international standards and guidelines; b) Provide adequate assurance that products, processes, systems, personnel or organizations conform to specified requirements in management and operation; ) Protect all relevant information:
Carry out activities in a fair and ethical and non-discriminatory manner, maintain professional integrity and avoid conflicts of interest: GB/T 27060—2006/IS0/IFC Guide 60:2004 Handle applications and reviews promptly, impartially and effectively, and ensure communication with customers on the expected schedule! Handle complaints or appeals promptly, impartially and effectively (when applicable), and take corrective measures when necessary: ​​iiKANr KAca-
Prepare appropriate records of conformity assessment activities and keep records consistent with the body's contractual and legal obligations. These records should include sufficient relevant documents to justify the decision to reject, withdraw, suspend or terminate the use of the mark: maintain and make available at any time information on the relevant costs of services, certificates and accreditation documents held or granted, etc.: i) Implement monitoring procedures (where appropriate): demonstrate its competence through appropriate mechanisms (such as accreditation, peer review); k) provide adequate records and reports on the conformity assessment process, where applicable, indicating non-conformities or necessary corrective measures; when using the mark, ensure that the rules or conditions for the use of the mark are implemented, so as to ensure that the rules or conditions for the use of the mark are implemented, so as to ensure that the rules or conditions for the use of the mark are implemented, so as to ensure that the rules or conditions for the use of the mark are implemented, so as to ensure that the rules or conditions for the use of the mark are implemented, so as to ensure that the rules or conditions for the use of the mark are implemented, so as to ensure that the rules and ... 4 Conformity assessment systems and schemes
Conformity assessment systems and schemes should be implemented as follows:
a) comply with 4.3. a) be designed and administered in a transparent, impartial, non-discriminatory and accountable manner; b) be designed and administered in a manner that avoids creating unnecessary barriers to trade; d) be adapted to specific circumstances or sectors to ensure acceptance of conformity assessment results; e) be administered in accordance with rules and procedures, which shall be documented and made available to relevant stakeholders in a timely and reasonable manner upon request; and specify the following: Criteria and process for entry into the system or scheme
How to document;
The specifications and/or standards on which the system or scheme is based; - How to obtain and maintain evidence of conformity; - How evidence of conformity is documented;
How to maintain integrity, impartiality and competence;
- A mechanism for the impartial handling of substantive and procedural appeals or complaints, which is clear, achievable and readily accessible. 4.5 Conformity assessment results The conformity assessment results (evaluation reports, test reports, certificates, marks, etc.) shall: a) be clear, unambiguous, and easily understandable, and shall not mislead in any way, indicating the requirements (such as standards, guidelines, regulations or technical specifications) on which the assessment activities are based, the scope of application of the assessment, and how the results are ensured (such as through accreditation, certification and peer review) b) be accurately maintained by the conformity assessment body system or program, and be available upon request under the premise of ensuring confidentiality. d) be relevant to promote acceptance or acceptance. GB/T 27060—2006/IS0/1EC(UID 60:2004 References
GB/T 1909-2000 Quality Management System Requirements (IDT 1509001:2000)ISO/IFC Guide 7:1994 Guidelines for Conformity Assessment Standards Applicable to Conformity Assessment 21
IS0/IEC Guide 28:2008 Qualification Assessment - Guidelines for Third-Party Product Certification Systems 3
Proficiency Testing for Comparisons between Laboratories Part 1: Establishment and Implementation of Proficiency Testing Schemes (IDT 1S0/IH0 Guide 13-1:-997)C:B/T:183.2199 Proficiency testing using inter-laboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratories and proficiency testing bodies (idlIS0)/IEC Guide 43-2:1997)6]
1S()/IFC: Guide 5H::988 Methods for using supplier quality systems in third-party product certification IS0/IEC Guide 59:1991 Good practice for standardization (GI3/T 27065-2004 Requirements for product certification bodies (IS0/I with: Guide 6:1996: IDTG13/T 270682006
Agreement on recognition and acceptance of conformity assessment results (130)/1E Guide (8:2092, IDT)GH/T 270:—2(005
General requirements for bodies accredited for conformity assessment (IS0)/EC17011;2CC5,))）GB/T183462001 General requirements for inspection bodies for services (ID1IS)/IF10:103)IS0/1E℃1702.200% Guide for certification bodies of conformity assessment personnel (:3/T 270242004 General requirements for certification bodies for conformity assessment personnel (IS0/[F::70)24:29193,ID)T）131
IS0/IEC 17025:2005
G3/1 27030—2006
General requirements for the competence of testing and accreditation laboratories General requirements for third party conformity marking for conformity assessment (ISO/IEC 17030:2003 GB/T 27050. 1
Quality assessment
(ISO/IEC 17050 1:2004 .IDT)
Supplier's declaration of conformity
1 Part 1: General requirements
Supplier's declaration of conformity for conformity assessment Part 2: Supporting documents5/1 27050. 2—2006
(ISO/IEC 17050-2 : 290. ,IDT)1 (G13/ 19011-2003 Quality and/or Environmental Management System Market Assessment Guidelines (15) 19)11:2 (012,11)1) [18]
World Trade Organization (WTO): Agreement on Technical Trade Barriers (1BT): 199 (particularly Article 191 of the Agreement on Conformity Assessment Procedures Carried Out by Government Bodies, Article 6 of the Agreement on Recognition of Conformity Assessment Procedures Carried Out by Government Bodies, Article 7 of the Agreement on Conformity Assessment Procedures Carried Out by Government Bodies) [20] World Trade Organization (WTO) : The first three years of the operation and implementation of the initiative on technical barriers to trade, 24 (GThT/9) [21] World Trade Organization (WTO) : The first three years of the operation and implementation of the initiative on technical barriers to trade, 293 (G/TBT/13) 27060-2006
National Standard of the People's Republic of China
Good Practice for Conformity Assessment
CB/T 27060-20E/IS0/IFC Guide 60;25G4Published and distributed by China Standard Publishing House
No. 16 Hebei Street, Fuxingmenwai, Beijing
Postal Code: 1uc045
Website spc, net, cn
Tel: 88523546F8517518
China Standard Publishing House Printing in Guangdong Province Distributed by new bookstores in various places
Book 880×1231716
First edition in April 2057
Printing sheet 0.5
Number of sheets 10 Thousand words
First printing in April 2007
+ 4: 153066 - 1-29127
If there is any printing error
Price 10.00 yuan
Replaced by our company's distribution center
Copyright exclusive infringement must be investigated
Report phone: (010) 68533533
t002*09 apn /OS1/90020902 1/22199 Proficiency testing using interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratories and proficiency testing bodies (IDL ISO)/IEC Guide 43-2: 1997) 6]
1S()/IFC: Guide 5H: 988 Methods for using supplier quality systems in third-party product certification ISO/IEC Guide 59: 1991 Good practice for standardization (GI3/T 27065-2004 Requirements for product certification bodies (ISO/IEC Guide 6: 1996: IDTG13/T 270682006
Agreement on recognition and acceptance of conformity assessment results (130)/1E Guide (8: 2092, IDT) GH/T 270:—2(005
General requirements for bodies accredited for conformity assessment (IS0)/EC17011;2CC5,))）GB/T183462001 General requirements for inspection bodies for services (ID1IS)/IF10:103)IS0/1E℃1702.200% Guide for certification bodies of conformity assessment personnel (:3/T 270242004 General requirements for certification bodies for conformity assessment personnel (IS0/[F::70)24:29193,ID)T）131
IS0/IEC 17025:2005
G3/1 27030—2006
General requirements for the competence of testing and accreditation laboratories General requirements for third party conformity marking for conformity assessment (ISO/IEC 17030:2003 GB/T 27050. 1
Quality assessment
(ISO/IEC 17050 1:2004 .IDT)
Supplier's declaration of conformity
1 Part 1: General requirements
Supplier's declaration of conformity for conformity assessment Part 2: Supporting documents5/1 27050. 2—2006
(ISO/IEC 17050-2 : 290. ,IDT)1 (G13/ 19011-2003 Quality and/or Environmental Management System Market Assessment Guidelines (15) 19)11:2 (012,11)1) [18]
World Trade Organization (WTO): Agreement on Technical Trade Barriers (1BT): 199 (particularly Article 191 of the Agreement on Conformity Assessment Procedures Carried Out by Government Bodies, Article 6 of the Agreement on Recognition of Conformity Assessment Procedures Carried Out by Government Bodies, Article 7 of the Agreement on Conformity Assessment Procedures Carried Out by Government Bodies) [20] World Trade Organization (WTO) : The first three years of the operation and implementation of the initiative on technical barriers to trade, 24 (GThT/9) [21] World Trade Organization (WTO) : The first three years of the operation and implementation of the initiative on technical barriers to trade, 293 (G/TBT/13) 27060-2006
National Standard of the People's Republic of China
Good Practice for Conformity Assessment
CB/T 27060-20E/IS0/IFC Guide 60;25G4Published and distributed by China Standard Publishing House
No. 16 Hebei Street, Fuxingmenwai, Beijing
Postal Code: 1uc045
Website spc, net, cn
Tel: 88523546F8517518
China Standard Publishing House Printing in Guangdong Province Distributed by new bookstores in various places
Book 880×1231716
First edition in April 2057
Printing sheet 0.5
Number of sheets 10 Thousand words
First printing in April 2007
+ 4: 153066 - 1-29127
If there is any printing error
Price 10.00 yuan
Replaced by our company's distribution center
Copyright exclusive infringement must be investigated
Report phone: (010) 68533533
t002*09 apn /OS1/90020902 1/22199 Proficiency testing using interlaboratory comparisons Part 2: Selection and use of proficiency testing schemes by laboratories and proficiency testing bodies (IDL ISO)/IEC Guide 43-2: 1997) 6]
1S()/IFC: Guide 5H: 988 Methods for using supplier quality systems in third-party product certification ISO/IEC Guide 59: 1991 Good practice for standardization (GI3/T 27065-2004 Requirements for product certification bodies (ISO/IEC Guide 6: 1996: IDTG13/T 270682006
Agreement on recognition and acceptance of conformity assessment results (130)/1E Guide (8: 2092, IDT) GH/T 270:—2(005
General requirements for bodies accredited for conformity assessment (IS0)/EC17011;2CC5,))）GB/T183462001 General requirements for inspection bodies for services (ID1IS)/IF10:103)IS0/1E℃1702.200% Guide for certification bodies of conformity assessment personnel (:3/T 270242004 General requirements for certification bodies for conformity assessment personnel (IS0/[F::70)24:29193,ID)T）131
IS0/IEC 17025:2005
G3/1 27030—2006
General requirements for the competence of testing and accreditation laboratories General requirements for third party conformity marking for conformity assessment (ISO/IEC 17030:2003 GB/T 27050. 1
Quality assessment
(ISO/IEC 17050 1:2004 .IDT)
Supplier's declaration of conformity
1 Part 1: General requirements
Supplier's declaration of conformity for conformity assessment Part 2: Supporting documents5/1 27050. 2—2006
(ISO/IEC 17050-2 : 290. ,IDT)1 (G13/ 19011-2003 Quality and/or Environmental Management System Market Assessment Guidelines (15) 19)11:2 (012,11)1) [18]
World Trade Organization (WTO): Agreement on Technical Trade Barriers (1BT): 199 (particularly Article 191 of the Agreement on Conformity Assessment Procedures Carried Out by Government Bodies, Article 6 of the Agreement on Recognition of Conformity Assessment Procedures Carried Out by Government Bodies, Article 7 of the Agreement on Conformity Assessment Procedures Carried Out by Government Bodies) [20] World Trade Organization (WTO) : The first three years of the operation and implementation of the initiative on technical barriers to trade, 24 (GThT/9) [21] World Trade Organization (WTO) : The first three years of the operation and implementation of the initiative on technical barriers to trade, 293 (G/TBT/13) 27060-2006
National Standard of the People's Republic of China
Good Practice for Conformity Assessment
CB/T 27060-20E/IS0/IFC Guide 60;25G4Published and distributed by China Standard Publishing House
No. 16 Hebei Street, Fuxingmenwai, Beijing
Postal Code: 1uc045
Website spc, net, cn
Tel: 88523546F8517518
China Standard Publishing House Printing in Guangdong Province Distributed by new bookstores in various places
Book 880×1231716
First edition in April 2057
Printing sheet 0.5
Number of sheets 10 Thousand words
First printing in April 2007
+ 4: 153066 - 1-29127
If there is any printing error
Price 10.00 yuan
Replaced by our company's distribution center
Copyright exclusive infringement must be investigated
Report phone: (010) 68533533
t002*09 apn /OS1/90020902 1/2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.