This part specifies the product code, performance requirements, inspection rules, test methods, packaging, marking, transportation and storage of diamond-shaped glue-coated insulating paper for electrical use. This part applies to diamond-shaped glue-coated insulating paper for electrical use. JB/T 10442.3-2004 Diamond-shaped glue-coated insulating paper for electrical use Part 3: Single material diamond-shaped epoxy glue insulating paper JB/T10442.3-2004 Standard download decompression password: www.bzxz.net

ICS29.035.99
Machinery Industry Standard of the People's Republic of China
JB/T10442.3--2004
Electrical rhombic coated insulating paper
Part 3: Individual materials
Insulating paper coaded with epoxy resin binder forming rhombic patternforelectricalpurposes
Part3：Individual materials
Insulating paper coaded with epoxy resin binder forming rhombic pattern2004-02-10 Issued
2004-06-01 Implementation
The National Development and Reform Commission of the People's Republic of China Issued Foreword
2 Normative reference documents,
3 Product code, specification.
3.1 Code
3.2 Specification,
4 Requirements
Performance requirements
5 Product curing conditions
Product batch, sampling rules and factory test items6
Test method
7.1 Appearance..| |tt||7.2 Dimensions,
7.3 Performance requirements
8 Packaging, marking, storage and transportation
Storage period,
Table 1 Performance requirements
JB/r10442.3—2004
JB/T10442.3—2004
JB/10442 "Electrical diamond coated insulating paper" is divided into three parts: - Part 1: Definition and general requirements:
- Part 2: Test methods:
- Part 3: Single material diamond epoxy adhesive insulating paper. This part is the third part of JB Hall 10442. This part is formulated for the first time.
This part is proposed by the China Machinery Industry Federation. This part is under the jurisdiction of the National Technical Committee for Standardization of Insulating Materials. This part was drafted by Guilin Electric Science Research Institute, Nantong Hongan Sanmu Insulation Material Co., Ltd., Leshan Ouda Insulation Material Co., Ltd., and Shenyang Transformer Co., Ltd. The main drafters of this part are Li Bingsong, Jian Xuemei, Chen Kuan, Yang Heping, Lei Qiang, and Xiao Fuming. 1 Scope
Electrical diamond coated insulating paper
Part 3: Single material
Diamond epoxy adhesive insulating paper
JB/T10442.3--2004
This part of JB/T10442 specifies the product code, performance requirements, inspection rules, test methods, packaging, marking, transportation and storage of diamond epoxy adhesive insulating paper for electrical use.
This part is used for diamond epoxy adhesive insulating paper. The product is made by coating the modified epoxy resin on the insulating paper in a diamond shape and curing it into the B stage. It can be used for turn-to-turn and inter-layer insulation of transformers and mutual inductors. 2 Normative references
The clauses in the following documents become the clauses of this part through reference in this part of JB/T10442. For any dated referenced document, all subsequent amendments (excluding errata) or revisions are not applicable to this part. However, parties to an agreement based on this part are encouraged to study whether the latest versions of these documents can be used. For any undated referenced document, the latest version applies to this part.
JB/T10442.1 Diamond-grid coated insulating paper for electrical use Part 1: Definitions and general requirements JB/10442.2 Diamond-grid coated insulating paper for electrical use Part 2: Test methods 3 Product code and specification
3.1 Code
72EP9.4/6.5·αd-××α can be 45°, 20° or other angles. 3.2 Specifications
Divided by substrate thickness. The following specifications are recommended: 0.08mm, 0.13mm, 0.18mm, 0.20mm, 0.25mm. 4 Requirements
4.1 Appearance
Should meet the requirements of JB/10442.1.
4.2 Size
Width: Recommended to use 600mm±10mm: 800mm±15mm: 1000mm±20mm. Length: The diameter of the roll is 300mm to 360mm or as stipulated in the contract between the supplier and the buyer. Each roll shall not exceed four sections, and the length of each section shall not be less than 5m, and there shall be obvious markings at the head of the section.
Diameter of the inner core of the roll: 76mm±2mm.
4.3 Performance requirements
Should meet the requirements of Table 1.
JB/T10442.3—2004
Thickness and tolerance of substrate
Fitness of substrate
Thickness of single-sided adhesive
Electrical conductivity of water extract
pH value of water extract
Oil absorption
100℃±2
Pollution to transformer oil
Elongation
5Product curing conditions
In air
N/10mm width
1Performance requirements
0.080±0.005
≥450
≥500
0.130±0.007
0.180±0.0100 .200±0.010
≥650
≥400
No pollution (tan8<0.001)
≥900
≥1000
≥160
≥1350
≥1500
≥180Www.bzxZ.net
≥1500
≥1700
0.250±0.0t0
≥230
≥100
≥2000
≥2300
Firstly cure at 90℃±5℃ for 3h, then cure at 125℃±5℃ for 6h, or according to the curing conditions specified by the supplier and the tape supplier. 6 Product batch, sampling rules and factory test items The products are produced in batches of 2 tons continuously. For each batch, three rolls are randomly selected and the full width and length are several meters. The sample is cut from one sample and the other two samples are reserved. Each batch should be tested for factory delivery. The items are appearance, number of sections and items 1, 3, 11, 12, 13, 14 (in air) in Table 1.
7 Test method
7.1 Appearance
Perform according to JB/T10442.2.
7.2 Size
The outer diameter of the coil, the inner diameter of the core and the length of each section are measured with a steel ruler. Performance requirements
According to the provisions of JB/10442.2, see Table 1. 2
Packaging, marking, storage and transportation
Should comply with the requirements of JB/T10442.1
Storage period
The storage period of the product is 12 months under room temperature conditions. JB/T10442.3—2004
People's Republic of China
Mechanical Industry Standard
Electrical diamond coated insulating paper
Part 3: Single material diamond epoxy adhesive insulating paper JB/T10442.3-2004
Published and distributed by Machinery Industry Press
No. 22, Baiwanzhuang Street, Beijing
Postal Code: 100037
Format 890mm×1240mm1/1 6?0.5 printing sheets·11,000 words 1st edition, 1st printing, June 2004
Book number: 15111·7302
Website: http://cmpbook.comEditorial department phone:
（010）88379779
Direct sales center phone:
（010）88379693
All books without anti-counterfeiting label on the cover are pirated
Copyright reserved
Infringements will be investigated
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.