JB/T 3593-1999 This standard is a revision of JB 3593-84 "Heat-treated powder metallurgy iron-based structural materials", and the technical content has changed during the revision. This standard specifies the chemical composition, physical and mechanical properties and test methods of heat-treated powder metallurgy iron-based structural materials. This standard applies to the selection of sintered carbon steel, sintered copper steel, and sintered copper-molybdenum steel in the heat-treated state specified in GB/T 14667.1-1993 "Powder metallurgy iron-based structural materials Part 1: Sintered iron, sintered carbon steel, sintered copper steel, and sintered copper-molybdenum steel". This standard was first issued on March 5, 1984. JB/T 3593-1999 Heat-treated powder metallurgy iron-based structural materials JB/T3593-1999 standard download decompression password: www.bzxz.net

ICS77.160
Machinery Industry Standard of the People's Republic of China
JB/T3593—1999
Heat-treated sintered iron-based structural materialsHeat-treated sintered iron-based structural materialsPublished on August 6, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3593—1999
This standard is a revision of JB3593-84 "Heat-treated powder metallurgy iron-based structural materials". Compared with JB3593—84, this standard only changes the material grade indication method in the original standard to the marking method according to GB/T4309—1984 "Classification and Grade Indication Method of Powder Metallurgy Materials", and the main technical performance indicators have not changed. This standard replaces JB3593—84 from the date of implementation. This standard is proposed and managed by the Technical Committee for Standardization of Powder Metallurgy Products. The main drafting unit of this standard is Beijing Powder Metallurgy Research Institute. The main drafters of this standard are Hao Rongwei, Cao Baoxing and Yin Hongyu. This standard was first issued on March 5, 1984. 1
1 Scope
Machinery Industry Standard of the People's Republic of China
Heat treated sintered iron-based structural matarials Heat treated sintered iron-based structural matarials JB/T3593—1999
Replaces JB3593—84
This standard specifies the chemical composition, physical and mechanical properties and test methods of heat treated powder metallurgy iron-based structural materials (hereinafter referred to as materials).
This standard applies to the selection of sintered carbon steel, sintered copper steel and sintered copper-molybdenum steel in heat treatment state as specified in GB/T14667.1-1993 "Powder Metallurgy Iron-Based Structural Materials Part 1 Sintered Iron, Sintered Carbon Steel, Sintered Copper Steel and Sintered Copper-Molybdenum Steel". 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T4309—1984
GB/T5163—1985
GB/T7964—1987
GB/T9096—1988
GB/T 9097.1—1988
JB/T 8063.1—1996
JB/T8063.2—1996
JB/T8063.3—1996
3 Technical requirements
3.1 Material grades
Classification and grade designation of powder metallurgy materials Permeability Sintered metal materials - Determination of density Sintered metal materials (excluding cemented carbide) Sintered metal materials (excluding cemented carbide) Sintered metal materials (excluding cemented carbide) Materials with basically uniform density
Room temperature tensile test| |tt||Impact test method
Determination of apparent hardness Part I: Section hardness Chemical analysis method for powder metallurgy materials and products Determination of carbon in iron-based materials and products (gas volumetric method)
Chemical analysis method for powder metallurgy materials and products Determination of copper in iron-based materials and products (ammonium hydrogen fluoride masked iodine method)
Chemical analysis method for powder metallurgy materials and products Determination of molybdenum in iron-based materials and products (thiocyanate photometry)
Material grades shall be marked in accordance with the provisions of GB/T4309. 3.2 Material quality
The chemical composition and physical and mechanical properties of the material shall comply with the provisions of Table 1. Approved by the State Bureau of Machinery Industry on August 6, 1999 and implemented on January 1, 2000
Copper-molybdenum steelwwW.bzxz.Net
FO103J
F01121
F0113J
FO1221
F01231
F02021
F0203I
F02121
C combination
1 Combined carbon is allowed to be evaluated by metallographic method.
JB/T3593-1999
Chemical composition%
2 When the combined carbon content is less than 0.4%, the carburizing rate shall be ignited. 3 The data in brackets are reference values.
4 Test methods
Physical and mechanical properties
Tensile strength
≥（400）
≥450
≥450
≥500
≥550
≥650
≥550
Impact toughness
(without cut)
4.1 The chemical composition and physical and mechanical properties of the test materials should be made from the same alloy powder, under the same process conditions and in the same batch. 4.2
The chemical composition of the material shall comply with the provisions of JB/T8063.1~8063.3. 4.3 The density of the material shall comply with the provisions of GB/T5163. 4.4 The hardness of the material shall comply with the provisions of GB/T9097.1. 5 The tensile strength of the material shall comply with the provisions of GB/T7964. 4.5
4.6 The impact toughness of the material shall comply with the provisions of GB/T9096. 4.7 When manufacturing parts with materials specified in this standard, the manufacturer must ensure that the material of the parts meets the performance requirements specified in the standard. The content and test methods of the part performance test and acceptance shall be in accordance with the relevant standards or agreed upon by the manufacturer and the ordering unit as required by the standard. 2
Republic
Mechanical Industry Standard
Heat-treated state powder metallurgy iron-based structural materials JB/T3593-1999
Published and issued by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×12301/16 Printing sheet 1/2 Number of words 6.000 First edition in March 2000, first printing in March 2000 Number of copies 1-500 Price 500 yuan
No. 99-1185
Mechanical Industry Standard Service Network: http:/AvwwJB.ac.cn6666
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.