Some standard content:
ICS37.100.20
Packaging Industry Standard of the People's Republic of China
BB/T0050—2009
Hot Stamping Ribbon
2009-11-17 Issued
2010-04-01 Implementation
Issued by the Ministry of Industry and Information Technology of the People's Republic of China Announcement of the Ministry of Industry and Information Technology of the People's Republic of China
Engineering Science [2009] No. 63
The Ministry of Industry and Information Technology approved 139 industry standards including "Snowplow", including 29 automotive industry standards, 29 pharmaceutical equipment industry standards, 4 packaging industry standards, and 77 textile industry standards (see Appendix 1 for standard number, name, main content and starting implementation date): Approved the amendment to the textile industry standard FZ/T73001-2008 "Socks" (see Appendix 2), which is now announced and the standard amendment will be implemented from the date of announcement. The above automotive, pharmaceutical equipment and packaging industry standards are published by China Planning Press, and the textile industry standards are published by China Standards Press. Attachment: Numbers, names and starting dates of implementation of 4 packaging industry standards. Ministry of Industry and Information Technology of the People's Republic of China November 17, 2009
Attachment:
Numbers, names and starting dates of implementation of 4 packaging industry standards Standard number
BB/T0050--2009
BB/T 0051—2009
BB/T 00522009
BB/T 00532009
Standard name
Thermal coding ribbon
Thermal transfer film for soft infusion bags
Liquid milk co-extrusion packaging film and bag
In-mold label
Start date of implementation
2010-04-01
2010-04-01
2 010-04-01
Normative references
Terms and definitions
Requirements
Test methods
Test rulesWww.bzxZ.net
Marking, packaging, transportation and storage
BB/T0050—2009
BB/T0050--2009
This standard is proposed by the China Packaging Federation
This standard is under the jurisdiction of the National Technical Committee on Packaging Standardization. The drafting units of this standard are: Jiaozuo Zhuoli Hot Stamping Materials Co., Ltd. and China Packaging Research and Testing Center. The main drafters of this standard are: Zhang Zhenyu, Zhao Yanming, Zhang Tielei, Niu Shumei, Geng Yanping, Deng Lixia, and Zhu Pengwu. 1 Scope
Thermal coding ribbons
BB/T0050—2009
This standard specifies the product classification, requirements, inspection methods, inspection rules and marking, packaging, transportation and storage of thermal coding ribbons. This standard applies to thermal coding ribbons (hereinafter referred to as ribbons) made of plastic film as the substrate and coated with transferable ink for letterpress hot stamping of composite flexible packaging materials.
2 Normative referenced documents
The clauses in the following documents become the clauses of this standard through reference in this standard. For any dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard; however, parties to agreements based on this standard are encouraged to investigate whether the latest versions of these documents can be used. For any undated referenced documents, the latest version shall apply to this standard GB/T191 Pictorial marking for packaging, storage and transportation (modISO780:1997) GB/T1040.3 Determination of tensile properties of plastics Part 3: Test conditions for film and sheeting (idtIS0527-3:1995) GB/T 2918
GB/T3979
GB/T12027
3 Terms and definitions
Standard environment for conditioning and testing of plastic specimens (idtIS0291:1977) Method for measuring object color
Test method for the rate of dimensional change of plastic film and sheeting after heating (idtIS011501:1995) Hot stamping ribbon hot stamping ribbon
A thermal transfer material made by using plastic film as the base material, coating one side with a transferable ink layer, and then drying, slitting and other processes. When using, keep the coated surface of the ribbon facing the substrate, so that the heated hot stamping machine relief plate can instantly press from the back of the ribbon to transfer the oil layer on the ribbon to the surface of the substrate permanently. 3.2
Losepowder
The phenomenon that the oil layer of the ribbon falls off in the printing process to form dots, flakes or lumps. 3.3
Mottle
Transparent spots appearing on the ribbon due to production defects or other reasons. 3.4
Lightline
Transparent patterns appearing on the ribbon due to production defects or other reasons. BB/T0050—2009
Lines
Dark linear patterns appearing on the ribbon due to production defects or other reasons3.6
Ribbon tightness
The surface hardness of the outer cylinder of the ribbon roll is used to reflect the winding tension of the ribbon roll3.7
Adhesion resistance
The characteristic requirement that the ribbon and the substrate are easy to separate during the thermal transfer process
Specifications and dimensional deviations
Common specifications and dimensions of ribbons: length is 100m, widths are 20mm, 25mm, 30mm, 35mm.500mm respectively, other specifications are determined by negotiation between the supply and demand parties,
See the table for the dimensional deviation requirements of the ribbons!
Table 1 Dimensional deviation requirements
Width deviation
4.2 Appearance quality
The surface is not allowed to have stains, impurities, unevenness, ribs, etc. Length deviation
The end face is flat, scratches and radial wrinkles are not allowed, and the end face and the tube core are misaligned ≤0.5mm. 4.2.3
The ribbon has no joints, and interlayer adhesion is not allowed
White stripes with a width of >0.5mm and white spots with a diameter of >1mm are not allowed. Stripes with a width of >2mm are not allowed: in 50m length 4.2.4
, the cumulative length of stripes with a width of ≤0.5mm is not allowed to exceed 2m, the number of white spots with a diameter of ≤1mm is not allowed to exceed 5/m2, and the cumulative length of stripes with a width of ≤2mm is not allowed to exceed 5m.
4.2.5 The color difference of the same color in the same batch (CIEL**b*) requires AE≤4. 4.2.6
The tightness of the ribbon roll (Shore A) is required to be between 85 degrees and 98 degrees. 4.3 Product performance
The product performance requirements are shown in Table 2.
Product performance requirements
Tensile strength
Heat shrinkage (longitudinal)
Print clarity
Print powder and powder loss
≥190
Within 2m long ribbon. The defective rate of missing pen section, burr, ink mass and hollow is ≤5% not allowed
Print friction resistance
Anti-adhesion
Oxygen and water resistance
Test method
5.1 Sampling method
Print clarity after boiling
Print friction resistance after boiling
Print clarity after soaking
Print clarity after soaking Friction resistance of trace
Clearance of trace after freezing
Friction resistance of trace after freezing
Table 2 (continued)
Self-detachment
BB/T0050—2009
Within a 2m long ribbon, the rate of defective characters with missing strokes, broken lines, burrs, ink clumps, and hollows is ≤5% times
Within a 2m long ribbon, the rate of defective characters with missing strokes, broken lines, burrs, ink clumps, and hollows is ≤5% times
Within a 2m long ribbon, the rate of defective characters with missing strokes, broken lines, burrs, ink clumps, and hollows is ≤5% times
After removing the ribbon from the packaging, remove the sealing label and store it carefully to prevent contamination. 5.2 Sample Conditioning and Test Environment
Sample condition shall be conditioned in an environment of 23℃±5℃ and 50%±10% relative humidity as specified in GB/T2918 for no less than 8 hours, and the test shall be conducted under such environmental conditions. 5.3 Dimension Measurement
5.3.1 Width Measurement
Measure the data using a steel ruler or vernier caliper with an accuracy of no less than 0.5mm. 5.3.2 Length Measurement
Measure the data using a calibrated counter device. 5.4 Appearance Quality Inspection
Inspect under natural light according to the requirements of 4.2.1 to 4.2.4. 5.5 Determination of color difference of the same color in the same batch
The instrument adopts an integrating sphere colorimeter, the standard illuminant is D65, and the color measurement field is 10°; the measurement area is generally a circular hole with a diameter of Φ25mm. If the measured part is small, a small area observation hole is allowed. But its area shall not be less than 25mm2. Taking the standard sample as the reference, measure the L*α*b* value of the CIEL*α*b* uniform color space, and then measure the color difference AE of other samples with the same color and the same part of the reference.
5.6 Tensile strength
Carry out according to the provisions of GB/T1040.3. The sample adopts a strip shape with a length of 150mm and a width of 15mm±0.1mm, the distance between the clamps is 100mm, the tensile speed is 100mm/min±10mm/min, and 5 longitudinal samples are measured respectively. 5.7 Determination of heat shrinkage
Carry out according to the provisions of GB/T12027 test method. When the oven is kept at a constant temperature of 120℃±3℃, place the samples flatly in the oven and start timing. After 10 minutes, take out the samples and measure them after they are fully cooled to the ambient temperature. Take the arithmetic mean of the test results of the samples as the thermal shrinkage rate of the ribbon, and keep two decimal places. 5.8 Determination of film roll tightness
Place the ribbon roll flat and use a Burke hardness tester to measure any positions of the outer cylindrical surface of the ribbon roll, a total of 5 places, and take the arithmetic mean of the 5 measurement results as the thermal shrinkage rate of the ribbon. Tightness of ribbon film roll 5.9 Print clarity
Install the ribbon and printing material on the printer separately, and configure embossed characters of No. 4 or above. According to the printing operation conditions, print continuously for 2m, and count the number of characters with missing strokes, burrs, clumping, and hollowness. The percentage of defective characters to the total number of characters is taken as the print clarity of the ribbon
5.10 Printing powdering and slipping
Install the ribbon and printing material on the printer separately, and according to the printing operation conditions, print continuously for 100m to check for powdering and slipping.
5.11 Friction resistance of print
Cut the copy paper into the size of 50mm×220mm. Fix it on the sliding friction block 1 of the test machine: load 20N±0.2N; after turning on the machine, rub it at a uniform speed of 40 times/min, and record the number of frictions when the print begins to become blurred as the test result. 5.12 Anti-adhesion
Install the ribbon and the printing material on the printer separately:, set the temperature to 100℃~150℃; print pressure: 30N40N; print speed: 100 times/min~250 times/min, and print automatically for 2m continuously. Test whether the ribbon and the printing material can separate by themselves during the printing process. 5.13 Water boiling resistance
Put the substrate sample in a water bath, keep it at 85℃ for 30min, then take the sample out of the water bath, cool it to room temperature, and then , respectively test the print clarity and print friction resistance 5.14 Double feng shui resistance
Put the printed sample into a beaker containing 70ml 30% hydrogen peroxide, store it at room temperature for 5 minutes, take out the sample from the beaker, respectively test the print clarity and print friction resistance 5.15 Freezing resistance
Put the printed surface of the substrate facing up in a refrigerator, and freeze it at -17℃±1℃ for 12 hours. Then take the sample out of the refrigerator and immediately test the print clarity and print friction resistance 6 Inspection rules
6.1 Batch
For products of the same specifications with the same raw materials, formula, process conditions, continuous production and submitted for acceptance at the same time, every 5000 rolls are a batch. If there are less than 5000 rolls, the demand of one order is a batch. 6.2 Inspection classification
Inspection is divided into Guangli inspection and type inspection.
6.3 Sampling
6.3.1 For factory inspection, 5 rolls are randomly sampled from each batch, 2 rolls are retained. For 3 roll inspection, if the batch is less than 5 rolls, 6 rolls are sampled. 6.3.2 For type inspection, 6 rolls are randomly sampled from each batch, 2 rolls are retained. For 4 roll inspection, if the batch is less than 6 rolls, 6 rolls are sampled. 4
6.3.1 Factory inspection.
BB/T0050—2009
Inspect item H in 4.1 and 4.2 except for the color difference between batches, and inspect items in 4.3 except for the printing powder and slag, tensile strength and freezing resistance.
6.3.2 Type inspection
All requirements listed in this standard are type inspection items. Type inspection shall be carried out in any of the following circumstances: trial production of new products or old products transferred to other factories for production; a) After formal production, when there are major changes in ink formula, raw materials, production process, and production equipment, which may affect product performance; ) During formal production, periodically or after accumulating a certain amount of output, an inspection shall be carried out once a year; d) When the product is discontinued for a month before resuming production;
When the factory inspection result is significantly different from the last routine inspection result; e) When the national quality supervision agency proposes a requirement for type inspection; When the user proposes an inspection requirement in the order contract. g)
6.4 Judgment rules
Specifications, dimensions, appearance quality, and product performance shall be inspected according to the requirements of 4.1~4.3. If one of 4.1 and 4.2 is unqualified, double sampling shall be conducted for re-inspection. If all are qualified, it shall be judged as qualified, and if one is unqualified, it shall be judged as unqualified; if one of 4.3 is unqualified, the batch shall be judged as unqualified.
7 Marking, packaging, transportation and storage
7.1 Marking
7.1.1 Product marking
The product name, number, specification, production date and other relevant information shall be indicated on the cover label of each roll of product. The use of neutral mark or special mark shall be agreed upon by the supply and demand parties
7.1.2 The products leaving the factory shall have a product inspection certificate. 7.2 Packaging
7.2.1 The packaging method and requirements of the product shall be agreed upon by the supply and demand parties. 7.2.2 The graphic mark of the packaging box 1 shall comply with the provisions of GB/T191. 7.3 Transportation
During transportation, products are not allowed to be thrown, dropped, lost or thrown, and should be protected from squeezing, impact, rain and sun exposure. 7.4 Storage
The storage room should be dry and ventilated. There should be no corrosive substances such as acid and alkali. The temperature should be maintained at 5℃~35℃. The relative humidity should not be higher than 85%. When stacking products, they should be placed on a flat ground or board in the direction of the arrow on the carton, and 1m away from the heat source; the products should remain in the original packaging state, and the stacking height should not exceed 1.2m. The storage period shall not exceed 12 months from the date of production5
S/N:1580177·312
58017731200>
Packaging Industry Standard of the People's Republic of China
Thermal Coding Ribbon
BB/T (00502009
Published by China Planning Press
(Address: 4th Floor, Building C, 11th Public Building, Benqiaodibeilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Issued by Beijing Distribution Office of Xinhua Bookstore
Printed by Hefuhua Printing and Packaging Co., Ltd.
880×1230 old*
0.75 sheets
First edition in January 2010
First printing in January 2010
Print quantity 1-600
Unified - Book number: 1580177-312
Price: 10.00 yuan
Copyright reserved
Infringement will be investigated9 Print clarity
Install the ribbon and printing material on the printer separately, and configure embossed characters of No. 4 or above. According to the printing operating conditions, print continuously for 2m, and count the number of characters with missing strokes, burrs, clumping, and hollowness. The percentage of defective characters to the total number of characters is taken as the print clarity of the ribbon.
5.10 Printing powdering and slippage
Install the ribbon and printing material on the printer separately, and according to the printing operating conditions, print continuously for 100m to check for powdering and slippage.
5.11 Friction resistance of print
Cut the copy paper into the size of 50mm×220mm. Fix it on the sliding friction block 1 of the test machine: load 20N±0.2N; after turning on the machine, rub it at a uniform speed of 40 times/min, and record the number of frictions when the print begins to become blurred as the test result. 5.12 Anti-adhesion
Install the ribbon and the printing material on the printer separately:, set the temperature to 100℃~150℃; print pressure: 30N40N; print speed: 100 times/min~250 times/min, and print automatically for 2m continuously. Test whether the ribbon and the printing material can separate by themselves during the printing process. 5.13 Water boiling resistance
Put the substrate sample in a water bath, keep it at 85℃ for 30min, then take the sample out of the water bath, cool it to room temperature, and then , respectively test the print clarity and print friction resistance 5.14 Double feng shui resistance
Put the printed sample into a beaker containing 70ml 30% hydrogen peroxide, store it at room temperature for 5 minutes, take out the sample from the beaker, respectively test the print clarity and print friction resistance 5.15 Freezing resistance
Put the printed surface of the substrate facing up in a refrigerator, and freeze it at -17℃±1℃ for 12 hours. Then take the sample out of the refrigerator and immediately test the print clarity and print friction resistance 6 Inspection rules
6.1 Batch
For products of the same specifications with the same raw materials, formula, process conditions, continuous production and submitted for acceptance at the same time, every 5000 rolls are a batch. If there are less than 5000 rolls, the demand of one order is a batch. 6.2 Inspection classification
Inspection is divided into Guangli inspection and type inspection.
6.3 Sampling
6.3.1 For factory inspection, 5 rolls are randomly sampled from each batch, 2 rolls are retained. For 3 roll inspection, if the batch is less than 5 rolls, 6 rolls are sampled. 6.3.2 For type inspection, 6 rolls are randomly sampled from each batch, 2 rolls are retained. For 4 roll inspection, if the batch is less than 6 rolls, 6 rolls are sampled. 4
6.3.1 Factory inspection.
BB/T0050—2009
Inspect item H in 4.1 and 4.2 except for the color difference between batches, and inspect items in 4.3 except for the printing powder and slag, tensile strength and freezing resistance.
6.3.2 Type inspection
All requirements listed in this standard are type inspection items. Type inspection shall be carried out in any of the following circumstances: trial production of new products or old products transferred to other factories for production; a) After formal production, when there are major changes in ink formula, raw materials, production process, and production equipment, which may affect product performance; ) During formal production, periodically or after accumulating a certain amount of output, an inspection shall be carried out once a year; d) When the product is discontinued for a month before resuming production;
When the factory inspection result is significantly different from the last routine inspection result; e) When the national quality supervision agency proposes a requirement for type inspection; When the user proposes an inspection requirement in the order contract. g)
6.4 Judgment rules
Specifications, dimensions, appearance quality, and product performance shall be inspected according to the requirements of 4.1~4.3. If one of 4.1 and 4.2 is unqualified, double sampling shall be conducted for re-inspection. If all are qualified, it shall be judged as qualified, and if one is unqualified, it shall be judged as unqualified; if one of 4.3 is unqualified, the batch shall be judged as unqualified.
7 Marking, packaging, transportation and storage
7.1 Marking
7.1.1 Product marking
The product name, number, specification, production date and other relevant information shall be indicated on the cover label of each roll of product. The use of neutral mark or special mark shall be agreed upon by the supply and demand parties
7.1.2 The products leaving the factory shall have a product inspection certificate. 7.2 Packaging
7.2.1 The packaging method and requirements of the product shall be agreed upon by the supply and demand parties. 7.2.2 The graphic mark of the packaging box 1 shall comply with the provisions of GB/T191. 7.3 Transportation
During transportation, products are not allowed to be thrown, dropped, lost or thrown, and should be protected from squeezing, impact, rain and sun exposure. 7.4 Storage
The storage room should be dry and ventilated. There should be no corrosive substances such as acid and alkali. The temperature should be maintained at 5℃~35℃. The relative humidity should not be higher than 85%. When stacking products, they should be placed on a flat ground or board in the direction of the arrow on the carton, and 1m away from the heat source; the products should remain in the original packaging state, and the stacking height should not exceed 1.2m. The storage period shall not exceed 12 months from the date of production5
S/N:1580177·312
58017731200>
Packaging Industry Standard of the People's Republic of China
Thermal Coding Ribbon
BB/T (00502009
Published by China Planning Press
(Address: 4th Floor, Building C, 11th Public Building, Benqiaodibeilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Issued by Beijing Distribution Office of Xinhua Bookstore
Printed by Hefuhua Printing and Packaging Co., Ltd.
880×1230 old*
0.75 sheets
First edition in January 2010
First printing in January 2010
Print quantity 1-600
Unified - Book number: 1580177-312
Price: 10.00 yuan
Copyright reserved
Infringement will be investigated9 Print clarity
Install the ribbon and printing material on the printer separately, and configure embossed characters of No. 4 or above. According to the printing operating conditions, print continuously for 2m, and count the number of characters with missing strokes, burrs, clumping, and hollowness. The percentage of defective characters to the total number of characters is taken as the print clarity of the ribbon.
5.10 Printing powdering and slippage
Install the ribbon and printing material on the printer separately, and according to the printing operating conditions, print continuously for 100m to check for powdering and slippage.
5.11 Friction resistance of print
Cut the copy paper into the size of 50mm×220mm. Fix it on the sliding friction block 1 of the test machine: load 20N±0.2N; after turning on the machine, rub it at a uniform speed of 40 times/min, and record the number of frictions when the print begins to become blurred as the test result. 5.12 Anti-adhesion
Install the ribbon and the printing material on the printer separately:, set the temperature to 100℃~150℃; print pressure: 30N40N; print speed: 100 times/min~250 times/min, and print automatically for 2m continuously. Test whether the ribbon and the printing material can separate by themselves during the printing process. 5.13 Water boiling resistance
Put the substrate sample in a water bath, keep it at 85℃ for 30min, then take the sample out of the water bath, cool it to room temperature, and then , respectively test the print clarity and print friction resistance 5.14 Double feng shui resistance
Put the printed sample into a beaker containing 70ml 30% hydrogen peroxide, store it at room temperature for 5 minutes, take out the sample from the beaker, respectively test the print clarity and print friction resistance 5.15 Freezing resistance
Put the printed surface of the substrate facing up in a refrigerator, and freeze it at -17℃±1℃ for 12 hours. Then take the sample out of the refrigerator and immediately test the print clarity and print friction resistance 6 Inspection rules
6.1 Batch
For products of the same specifications with the same raw materials, formula, process conditions, continuous production and submitted for acceptance at the same time, every 5000 rolls are a batch. If there are less than 5000 rolls, the demand of one order is a batch. 6.2 Inspection classification
Inspection is divided into Guangli inspection and type inspection.
6.3 Sampling
6.3.1 For factory inspection, 5 rolls are randomly sampled from each batch, 2 rolls are retained. For 3 roll inspection, if the batch is less than 5 rolls, 6 rolls are sampled. 6.3.2 For type inspection, 6 rolls are randomly sampled from each batch, 2 rolls are retained. For 4 roll inspection, if the batch is less than 6 rolls, 6 rolls are sampled. 4
6.3.1 Factory inspection.
BB/T0050—2009
Inspect item H in 4.1 and 4.2 except for the color difference between batches, and inspect items in 4.3 except for the printing powder and slag, tensile strength and freezing resistance.
6.3.2 Type inspection
All requirements listed in this standard are type inspection items. Type inspection shall be carried out in any of the following circumstances: trial production of new products or old products transferred to other factories for production; a) After formal production, when there are major changes in ink formula, raw materials, production process, and production equipment, which may affect product performance; ) During formal production, periodically or after accumulating a certain amount of output, an inspection shall be carried out once a year; d) When the product is discontinued for a month before resuming production;
When the factory inspection result is significantly different from the last routine inspection result; e) When the national quality supervision agency proposes a requirement for type inspection; When the user proposes an inspection requirement in the order contract. g)
6.4 Judgment rules
Specifications, dimensions, appearance quality, and product performance shall be inspected according to the requirements of 4.1~4.3. If one of 4.1 and 4.2 is unqualified, double sampling shall be conducted for re-inspection. If all are qualified, it shall be judged as qualified, and if one is unqualified, it shall be judged as unqualified; if one of 4.3 is unqualified, the batch shall be judged as unqualified.
7 Marking, packaging, transportation and storage
7.1 Marking
7.1.1 Product marking
The product name, number, specification, production date and other relevant information shall be indicated on the cover label of each roll of product. The use of neutral mark or special mark shall be agreed upon by the supply and demand parties
7.1.2 The products leaving the factory shall have a product inspection certificate. 7.2 Packaging
7.2.1 The packaging method and requirements of the product shall be agreed upon by the supply and demand parties. 7.2.2 The graphic mark of the packaging box 1 shall comply with the provisions of GB/T191. 7.3 Transportation
During transportation, products are not allowed to be thrown, dropped, lost or thrown, and should be protected from squeezing, impact, rain and sun exposure. 7.4 Storage
The storage room should be dry and ventilated. There should be no corrosive substances such as acid and alkali. The temperature should be maintained at 5℃~35℃. The relative humidity should not be higher than 85%. When stacking products, they should be placed on a flat ground or board in the direction of the arrow on the carton, and 1m away from the heat source; the products should remain in the original packaging state, and the stacking height should not exceed 1.2m. The storage period shall not exceed 12 months from the date of production5
S/N:1580177·312
58017731200>
Packaging Industry Standard of the People's Republic of China
Thermal Coding Ribbon
BB/T (00502009
Published by China Planning Press
(Address: 4th Floor, Building C, 11th Public Building, Benqiaodibeilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Issued by Beijing Distribution Office of Xinhua Bookstore
Printed by Hefuhua Printing and Packaging Co., Ltd.
880×1230 old*
0.75 sheets
First edition in January 2010
First printing in January 2010
Number of copies: 1-600
Unified - Book number: 1580177-312
Price: 10.00 yuan
Copyright reserved
Infringements will be investigated2 Type inspection
All requirements listed in this standard are type inspection items. Type inspection shall be carried out in one of the following circumstances: trial production of new products or old products transferred to the factory for production; a) After formal production, when there are major changes in ink formula, raw materials, production process, and production equipment, which may affect product performance; ) During formal production, periodically or after accumulating a certain amount of output, an inspection shall be carried out once a year; d) When the product is discontinued for several months before resuming production;
When the factory inspection result is significantly different from the last routine inspection result; e) When the national quality supervision agency proposes a requirement for type inspection; When the user proposes an inspection requirement in the order contract. g)
6.4 Judgment rules
Specifications, dimensions, appearance quality, and product performance shall be inspected according to the requirements of 4.1~4.3. If one of 4.1 and 4.2 is unqualified, double sampling shall be conducted for re-inspection. If all are qualified, it shall be judged as qualified, and if one is unqualified, it shall be judged as unqualified; if one of 4.3 is unqualified, the batch shall be judged as unqualified.
7 Marking, packaging, transportation and storage
7.1 Marking
7.1.1 Product marking
The product name, number, specification, production date and other relevant information shall be indicated on the cover label of each roll of product. Whether to use neutral mark or special mark shall be agreed upon by both parties.
7.1.2 Ex-factory products shall have product inspection certificates. 7.2 Packaging
7.2.1 The packaging method and requirements of the product shall be agreed upon by both parties. 7.2.2 The graphic mark of the packaging box 1 shall comply with the provisions of GB/T191. 7.3 Transportation
During transportation, products are not allowed to be thrown, dropped, lost or thrown, and should be protected from squeezing, impact, rain and sun exposure. 7.4 Storage
The storage room should be dry and ventilated. There should be no corrosive substances such as acid and alkali. The temperature should be maintained at 5℃~35℃. The relative humidity should not be higher than 85%. When stacking products, they should be placed on a flat ground or board in the direction of the arrow on the carton, and 1m away from the heat source; the products should remain in the original packaging state, and the stacking height should not exceed 1.2m. The storage period shall not exceed 12 months from the date of production5
S/N:1580177·312
58017731200>
Packaging Industry Standard of the People's Republic of China
Thermal Coding Ribbon
BB/T (00502009
Published by China Planning Press
(Address: 4th Floor, Building C, 11th Public Building, Benqiaodibeilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Issued by Beijing Distribution Office of Xinhua Bookstore
Printed by Hefuhua Printing and Packaging Co., Ltd.
880×1230 old*
0.75 sheets
First edition in January 2010
First printing in January 2010
Number of copies: 1-600
Unified - Book number: 1580177-312
Price: 10.00 yuan
Copyright reserved
Infringements will be investigated2 Type inspection
All requirements listed in this standard are type inspection items. Type inspection shall be carried out in one of the following circumstances: trial production of new products or old products transferred to the factory for production; a) After formal production, when there are major changes in ink formula, raw materials, production process, and production equipment, which may affect product performance; ) During formal production, periodically or after accumulating a certain amount of output, an inspection shall be carried out once a year; d) When the product is discontinued for several months before resuming production;
When the factory inspection result is significantly different from the last routine inspection result; e) When the national quality supervision agency proposes a requirement for type inspection; When the user proposes an inspection requirement in the order contract. g)
6.4 Judgment rules
Specifications, dimensions, appearance quality, and product performance shall be inspected according to the requirements of 4.1~4.3. If one of 4.1 and 4.2 is unqualified, double sampling shall be conducted for re-inspection. If all are qualified, it shall be judged as qualified, and if one is unqualified, it shall be judged as unqualified; if one of 4.3 is unqualified, the batch shall be judged as unqualified.
7 Marking, packaging, transportation and storage
7.1 Marking
7.1.1 Product marking
The product name, number, specification, production date and other relevant information shall be indicated on the cover label of each roll of product. Whether to use neutral mark or special mark shall be agreed upon by both parties.
7.1.2 Ex-factory products shall have product inspection certificates. 7.2 Packaging
7.2.1 The packaging method and requirements of the product shall be agreed upon by both parties. 7.2.2 The graphic mark of the packaging box 1 shall comply with the provisions of GB/T191. 7.3 Transportation
During transportation, products are not allowed to be thrown, dropped, lost or thrown, and should be protected from squeezing, impact, rain and sun exposure. 7.4 Storage
The storage room should be dry and ventilated. There should be no corrosive substances such as acid and alkali. The temperature should be maintained at 5℃~35℃. The relative humidity should not be higher than 85%. When stacking products, they should be placed on a flat ground or board in the direction of the arrow on the carton, and 1m away from the heat source; the products should remain in the original packaging state, and the stacking height should not exceed 1.2m. The storage period shall not exceed 12 months from the date of production5
S/N:1580177·312
58017731200>
Packaging Industry Standard of the People's Republic of China
Thermal Coding Ribbon
BB/T (00502009
Published by China Planning Press
(Address: 4th Floor, Building C, 11th Public Building, Benqiaodibeilijia, Xicheng District, Beijing) (Postal Code: 100038 Tel: 6390643363906381) Issued by Beijing Distribution Office of Xinhua Bookstore
Printed by Hefuhua Printing and Packaging Co., Ltd.
880×1230 old*
0.75 sheets
First edition in January 2010
First printing in January 2010
Number of copies: 1-600
Unified - Book number: 1580177-312
Price: 10.00 yuan
Copyright reserved
Infringements will be investigated
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.