Thermal spraying--Spraying and fusing of self-fluxing alloys
Basic Information
Standard ID:
GB/T 16744-2002
Standard Name:Thermal spraying--Spraying and fusing of self-fluxing alloys
Chinese Name:
热喷涂 自熔合金喷涂与重熔
Standard category:National Standard (GB)
state:in force
Date of Release2002-04-16
Date of Implementation:2002-12-01
standard classification number
Standard ICS number:Mechanical manufacturing>>Surface treatment and coating>>25.220.20 Surface treatment
Standard Classification Number:Comprehensive>>Basic Standards>>A29 Material Protection
associated standards
alternative situation:GB/T 16744-1997
Procurement status:ISO 14920:1999,MOD
Publication information
publishing house:China Standard Press
ISBN:155066.1-18734
Publication date:2002-12-01
other information
Release date:1997-03-04
Review date:2004-10-14
drafter:Wu Jianhua
Drafting unit:Wuhan Institute of Materials Protection
Focal point unit:National Technical Committee for Standardization of Metallic and Non-metallic Coverings
Proposing unit:China Machinery Industry Federation
Publishing department:General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
competent authority:China Machinery Industry Federation
Introduction to standards:
This standard specifies the self-fluxing alloy thermal spraying method using spraying and melting to obtain uniform diffusion-bonded coatings. GB/T 16744-2002 Thermal Spraying Self-fluxing Alloy Spraying and Remelting GB/T16744-2002 Standard Download Decompression Password: www.bzxz.net
This standard specifies the self-fluxing alloy thermal spraying method using spraying and melting to obtain uniform diffusion-bonded coatings.
Some standard content:
GB/T16744
GB/T16744
ISO149201999
ISO149201999
ISO14920
ISO14920
ISO14920
ISO14920||tt ||ISO14920
ISO14920
GB/T16744
IS014920
IS06508
IS06508Www.bzxZ.net
IS0142322000
ABCDEFGHK
+1289+||tt| |+1291+
ISO14232
50mmx50mmx|| tt||IS06508
ISO14232
500℃
10mm×10mm
1.0mm~2.0mm
Ni30~Ni40
Ni40_Ni50| |tt||Ni50~Ni60
ISO14232
Ni(Co,Fe)
Ni(Co,Fe)
Indicates the surface of the white-melting alloy remelting coating Hardness (HRC) indicates nickel (cobalt, iron) based self-fluxing alloy
indicates the use of hot spraying method
indicates the mass fraction of hardness in powder
indicates the mass fraction of hardness in coating The hard phase added is quartz, indicating that the base phase of the coating is nickel (nipper, iron) based self-fluxing alloy, indicating that the thermal spraying method is adopted.
→1295+
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.