This standard specifies the definition, code structure, management and barcode symbol representation and application of participant position coding. This standard is applicable to the fields of electronic data interchange, automatic identification and data collection. GB/T 16828-2007 Commodity barcode participant position coding and barcode representation GB/T16828-2007 Standard download decompression password: www.bzxz.net
This standard specifies the definition, code structure, management and barcode symbol representation and application of participant position coding. This standard is applicable to the fields of electronic data interchange, automatic identification and data collection.
This standard refers to the 7th edition of the "EAN·UCC General Specification" formulated by the International Article Numbering Association (GS1), Chapter 2, Section 4, Position Coding and Symbol Representation, and combined with China's actual situation, GB/T16828-1997 "Position Code" has been revised. The technical content of this standard is consistent with the technical requirements of international standards.
This standard replaces GB/T16828-1997 "Location Code". The main changes of this standard compared with GB/T16828-1997 are as follows:
---The name of the standard is changed to commodity barcode participant location coding and barcode representation, which is one of the commodity barcode series standards.
---GB12904 "Commodity Barcode", GB/T12905 "Barcode Terminology" and GB/T16986 "EAN·UCC System Application Identifier" are added as normative reference documents.
---The code structure is changed from one to three.
---The relevant content of management is added.
---The relevant content of application identifier is added.
Appendix A of this standard is a normative appendix, and Appendix B is an informative appendix.
This standard is proposed and managed by the National Logistics Information Management Standardization Technical Committee.
The drafting organizations of this standard are China Article Numbering Center and Beijing Jiaotong University.
The main drafters of this standard are Zhang Chenghai, Li Sucai, Huang Yanbin, Wang Yaoqiu, Zhang Peiying and Du Jingrong.
This standard was first issued in 1997 and this is the first revision.
The clauses in the following documents become the clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB12904 Commodity Barcode (GB12904-2003, ISO/IEC15420:2000, NEQ)
GB/T12905 Barcode Terminology
GB/T15425 EAN·UCC System 128 Barcode
GB/T16986 EAN·UCC System Application Identifier (GB/T16986-2003, ISO/IEC15418:1999, NEQ)

ICS35.040
National Standard of the People's Republic of China
GB/16828--2007
Generation Building (B/116828---1997
Bar code for commodity
Participant location coding and bar code representation
Bar code for commodity--Global location number and symbol marking2007-07-27issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of China
2007-12-01implemented
Specification references
3Terms and definitions
Code structure
5Classification
Code symbol assembly and use
Appendix A (regulatory appendix) Calculation method of check code
Appendix B (informative appendix) Example of application of position substitution code in electronic data exchangeGB/T16B28--2007
GB/r 16828—2007
This standard refers to the 7th edition of the "EAN·UCC General Specification" formulated by the International Article Numbering Association (GS1), Section 2, Section 4, "Position Coding and Derivative Number Representation", and has revised the (3/15828-1997 Position Code) in combination with my country's actual situation. The technical content of this standard is consistent with the technical requirements of international standards. This standard replaces GB/T16828-1997 Position Code. The main changes of this standard compared with GB/T16828-1997 are as follows: The name of this standard is "Position and Coding of Commodity Barcode Participants and Barcode Representation", which is an additional volume in the commodity barcode series of standards. GB12904 "Commodity Barcode", GB/T12905 "Barcode Terminology" and GB/T16985 "FANTIC System Application Identifier" are normative reference documents.
Code Structure The first type is changed to the third type.
The relevant content of management is added.
-The relevant content of application identification is added. Appendix A of this standard is a normative appendix, and Appendix B is a formal appendix. This standard is proposed and coordinated by the National Logistics Information Management Standardization Technical Committee. The drafting unit of this standard: China Commodity Barcode Center, Beijing Jiaotong University. The main drafters of this standard: Zhang Chenghai, Li Sucai, Huang Yanbin, Gan Yaoqiu, Zhang Rongying, She Jingchai. This standard was first issued in 1997, and this is the first revision. s
1 Scope
Commodity barcode
Participant position coding and barcode representation
This standard specifies the definition, code structure, management and barcode symbol representation and application of participant position coding. This standard is applicable to electronic data interchange, digital identification, etc. 2 Normative referenced documents
GB/T 16828-2007
The following documents are incorporated herein by reference in their entirety into this standard. For all referenced documents of the specified period, all subsequent revisions (excluding errata) are applicable to this standard. However, the parties to the agreement on the addition of the standard are encouraged to study whether these documents can be used. G3 12994
GB/T 22905 Code Terminology
GB/T 13420(P9
GB/T 1598
3 Terms and Definitions
For the latest referenced documents (GB/
, the latest version is applicable to this standard,
003, ISO/C 118:1999,NFQ)
GB/T:12% Zhi currency established and the new set of applicable standards
Participation position code
glpha! lottumh
Legal participation in the supply chain
Jiang 1: Legal reality Qiao curtain will exist
Shen 2, the edge can be implemented you law to drink
Note 3: The location of the physical entity Hui Jing fast
4 Code structure
Signature and force position coding
Table 1:
Structure type
Structure--
Among them:||tt ||The code for identifying the energy entity and physical entity, customer bank, door, delivery place, etc., the location reference code and the check code group are represented by 1 digit, and the structure of the entity is shown in the location structure of the participant.
Guangchao identification code
X..XIxIX.X.xtx--a
XXaX,XXaXX,X
XX X.XX, X, X, X, X:
Location format
XaxxXa x.
a) Manufacturer identification code: It consists of 7 to 9 digits. For the specific structure, see GB12904. h) Location reference code: It consists of 3 to 5 digits. (center) Check code: 10 digits, calculation method see Appendix A, 5 Management
Participant location coding is managed and maintained by China Article Coding Center Check code
G13/T 16828-2007
6 Barcode symbol representation and application
6.1 Barcode symbol representation
When barcode symbols are used to represent the participant location abbreviation, they should be used together with the participant location coding application identifier (GB/T16986): The barcode symbol adopts UCC/EAN-128 barcode (GB/T15125), the participant location coding application identifier is shown in Table 2, and the barcode symbol representation example is shown in Figure 1.
Table 2 Participant location code application identifier Participant orientation code application identifier
6.2 Application
Pei Shi Xing Xi
410+Sign and orientation code
41:-Participant location code
112+Participant piece location code
413-+Participant orientation bone code
2141Participant location code
(5"Participant location code
(430)6901234567892
Figure 1 Barcode symbol representation example
Delivery party
Bill recipient
Supplier
Final amount of goods Purpose Class
Physical position
Participant position abbreviation code is mainly used for bar code symbol recognition and data collection (see 6.1) and data exchange (see Appendix 13).
Appendix A
(Normative Appendix)
Calculation method of check code
The check code is calculated by the following steps with 10 as the modulus and 3 as the weight factor: Steps:
Step 1: Number the 13-digit mathematical code (including the check code) from right to left, starting from!; Step 2: Number all the positions with even numbers "!"; Step 3: Multiply the result of the first step by the value 3 Step 4 ：Starting from the float 3, add the values ​​of all odd-numbered position 1s; Step 2: Add the result of step 3 to the result of step 4: GB/T16823--2007
Step 6: Subtract the result of step 5 from a number that is not less than the result of step 5 and is the smallest integer multiple of 10. The difference is the value of the check code.
Example: Calculate the check code C of 699123436789C. Step 1:
Step 2: 9-7-5-3-1+9.34
Step 2: 34×3=102
Step 4+8: 6-4·:2--C-+6·26|| tt||Step 5: 1c2÷26—128
Step 1: 130--128-2
The value of the check code is 2
GB/T16828-2007
. Application in China
(Informative Appendix)
Example of application of participant location code in electronic data exchange The following is an example of the use of participant location code in electronic data exchange. The exchange includes three shipping notices and one invoice. The sending date of the exchange is January 2, 20C5. The sender's location code is 5112345678998 and the recipient's location code is 680:234567892.
1IN13---UINOA:2-1 5112345678908.146991232567892:12 1050102:1000+1234555511++EANGOM
UNG-TFSADV5412345678908:14 169012345678 92:141050102:1009-98765555 : UN-+-D:93A:EAN0OX
（“a delivery notice）
UNE : 3 98765555 #
UNG-IVVOTC-+5412325678908:14-69C1234567892:14--050102:1090--98765556+UN-ID:93A:EANOOX
（four invoices）
LNE14【98765556*
NZ--212345555-
B.2 Application in XML
The following is an example of the application of the location of the participants in XML. The exchange is sent at 200】year 8 At 12:00 on December 2, the participant position code of the sender is 614141000012, and the participant position code of the receiver is 0012345009665.messagcHeadercreatianIntr-\2001-c8.02T12:00.00\userIdOJGROWER12345/userld
passwordSECRET0614111000012-/gln±
/meseugeHeader>
GB/T 16828-200/
People's Republic of China
National Standards
Product Code
Participant Position Coding and Indication
GB/T 16828—2007
Published and distributed by China Standards PressWww.bzxZ.net
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing Postal Code: 100045
Website: www, spc. nct, cn
Tel: 6832331668317548
China Standard Press, Huangdao Printing Factory, Xinhua Bookstore
Book 880×:31/16
Page 0.75
Word count 10
First edition in January 2008, the first edition in January 2008*
Book number: 1550661-30434 Price 14.00 yuan If there is any printing error, it will be replaced by Shuishe Distribution Center. Copyright is exclusive. Infringement will be investigated
Report phone: 01068533533
2002--87891
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.