Some standard content:
Light Industry Standard of the People's Republic of China
Photo Album, Name Card Album
1 Subject Content and Scope of Application
QB/T1440-1992
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of photo albums and name card albums. This standard applies to all kinds of bag-type and viscose photo albums and name card albums. 2 Reference standards
Pictorial marking for packaging, storage and transportation
GB 1911
GB/T451.2 Determination of quantitative quantity of paper and paperboardGB/T 2828
Counting sampling procedure and sampling table for batch inspection (applicable to inspection of continuous batches)GB/T 2829
Counting sampling procedure and sampling table for periodic inspection (applicable to inspection of stability of production process)Corrugated paperboard
GB/T 6543
3. Terms and codes
3.1 Floating edge: the distance between the three corresponding sides of the cover and the inner core3.2 Code: The codes for photo albums and business card albums are determined by Chinese phonetic alphabetic characters as follows: XC-D for bag-type photo albums; XC-N for viscose photo albums; and MP for business card albums.
4 Product classification
4.1 Photo albums are divided into two types: bag type and viscose.
4.2 Product specifications
The specifications of bag type photo albums, viscose photo albums and name card albums shall comply with the enterprise standards. Limit deviation: first-class products are ±1.5mm, and qualified products are ±2.0mm.
5 Technical requirements
5.1 The specifications and dimensions of various photo albums and name card albums shall comply with the provisions of Article 4.2. 5.2 Products are divided into first-class products and qualified products according to the technical indicators. 5.3 The thickness of plastic film shall not be less than 0.10mm. The thickness of PVC shall not be less than 0.04mm.
5.4 The basis weight of white paper shall be above 200g/m2. 5.5 Technical indicators shall comply with the provisions of Table 1. Approved by the Ministry of Light Industry of the People's Republic of China on February 21, 1992, and implemented on August 1, 1992
Cover, mm
Bleaching, mm
Humidity, %
Flatness, mm
Glue non-debonding temperature,
Glue line
Whiteness of white paper, %
Heat seal fastness, N/15mm
Test method
QB/T1440—1992
The book is clean, there should be no obvious indentation on the back, and the color overprint is clear
The color overprint deviation is not more than 0.4|| tt||The deviation of hot-dip anodized aluminum is not more than 0.5
Qualified products
The book is clean, there is no obvious indentation on the back, and the color overprint is clear
The deviation of color overprint is not more than 0.5
The deviation of hot-dip anodized aluminum is not more than 0.8
Not allowed
The deviation is not more than 2
The adhesive lines are clear and complete
Broken line: 5~20mm/book
Joining lines: no more than two places
No more than two sheets per book
The front side is not less than 80
Product specifications and dimensions: measured with a steel ruler with a graduation value of 1mm. ≤15
-17～40
Deflection is not more than 3
Glue lines are clear and complete
Breakage: 5～30mm/book
Parallel lines, no more than two places
No more than three sheets per book
The front side is not less than 75
Plastic film thickness, PVC thickness: measured with a micrometer with a graduation value of 0.01mm, white paper quantity: measured according to the provisions of GB/T451.2. 6.3
Cover overprint deviation, drift deviation, glue line: measured with a steel ruler with a graduation value of 0.5mm. 6.4
6.5 Cover, mildew: under 8W fluorescent light, 250mm distance, visual inspection. 6.6 Whiteness: Use a whiteness meter to measure the blue light whiteness value. 6.7 Heat seal fastness: Cut the sample into 15mm wide specimens and measure it with a ZLL-10 paper tensile tester (or a tester with the same accuracy).
6.8 No degumming temperature: Put the inner page into a plastic bag and place it in a freezer at 17℃. Take it out after 8 hours and measure it immediately. After the sample returns to room temperature, put it in a constant temperature box at +40℃, take it out after 8 hours and measure it immediately. 6.9 Flatness: When testing products with specifications below 16K, put two 100g codes on both sides of the front mouth, measure with a steel ruler with a graduation value of 0.5mm, and then calculate the difference between the highest and lowest points. When testing products with specifications above 16K, put two 200g magnetic codes on both sides of the front mouth, measure with a steel ruler with a graduation value of 0.5mm, and then calculate the difference between the highest and lowest points. 6.10 degrees: Under constant temperature conditions of (23 ± 1) °C and humidity of 60%~~65%, measure with a CSH-subtype measuring instrument (or other instruments with the same accuracy).
Inspection rules
Product inspection is divided into delivery inspection and routine inspection. This inspection adopts the piece-rate method, and the sample unit is piece. 7.3 Delivery inspection
QB/T1440---1992
7.3.1 Carry out in accordance with the provisions of GB/T2828, adopt the normal inspection-second sampling plan, and the inspection level is S-3. 7.3.2 The classification of non-conforming products, inspection items, and qualified quality level (AQL) values are shown in Table 2. Table 2
Classification of non-conforming products
7.4 Routine inspection
Specification size
Thickness of film
Whiteness of base paper
Adhesive line
Technical requirements
Test method
7.4.1 Carry out in accordance with the provisions of GB/T2829, and adopt a single sampling plan of discrimination level I. Samples for routine inspection must be randomly selected from the qualified batches of delivery inspection. 7.4.2
Routine inspection shall be carried out every six months. Routine inspection shall also be carried out in the following circumstances: when the design, structure, key process and main raw materials are changed; when production is resumed after a three-month suspension; when the qualified quality level (AQL)
First-class products
The national quality supervision agency proposes the requirement for routine inspection. c.
: Routine inspection items, technical requirements, test methods and non-conforming quality level (RQL) values shall be in accordance with the provisions of Table 3. 7.4.4
Classification of non-conforming products
Basis weight of white paper
Moisture content
Temperature for adhesive not to debond
Heat seal strength
8 Marking, packaging, transportation and storage
8.1 Marking
Technical requirements
Test methods
8.1.1 Product marking
The product shall be marked with product name, manufacturer name (or trademark), specifications, page number, etc. 8.1.2 Packaging marking
The markings on the outer packaging box, such as moisture-proof, heat-proof, and handle with care, shall comply with the provisions of GB191. 8.2 Packaging
8.2.1 The small packaging of the product shall be wrapped with wrapping paper, and a product certificate shall be placed inside. Qualified products
Unqualified quality level (RQL)
First-class products
Qualified productsWww.bzxZ.net
8.2.2 The outer packaging box should indicate the article number, weight, quantity, factory name, date of manufacture, etc. 8.2.3 The outer packaging of the product shall be made of corrugated paper boxes, and the packaging shall be firm. When there are special needs, the supply and demand parties shall negotiate in accordance with the relevant provisions of GB/T6543.
QB/T 1440--1992
During transportation, the product should be kept clean and dry, and loaded and unloaded with care, and it is strictly forbidden to be exposed to the sun and rain. 8.4 Storage
The storage warehouse of the product must be kept dry, ventilated, fireproof and moisture-proof. Additional remarks:
This standard is proposed by the Quality Standards Department of the Ministry of Light Industry. This standard is under the jurisdiction of the National Stationery and Sports Goods Standardization Center. This standard is drafted by Shanghai Paper Products Wuguang. The main drafters of this standard are Chen Ying, Guo Fusheng, Wang Jianping and Song Zhongan.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.