This standard specifies the technical requirements, test methods and inspection rules for white orchid extract. This standard applies to white orchid extract made by extracting white orchid flowers at room temperature using petroleum ether of fragrant flower specifications as a cleaning agent. QB/T 1796-1993 White orchid extract QB/T1796-1993 Standard download decompression password: www.bzxz.net

Industry Standard of the People's Republic of China
QB 1769~-1801-93
Standard for Spice
(Product Standard)
Published on April 29, 1993
Published on December 1, 1993
Published by the Ministry of Light Industry of the People's Republic of China
Subject Content and Applicability
Industry Standard of the People's Republic of ChinabZxz.net
White Energy Extract
Standard specifies the technical requirements, test methods and specification period of white energy extract. Q87796-93
This standard applies to the preparation of white energy extract with petroleum ether as the standard agent under temperature. 2 Reference standards
GB/T18 Inspection and Quarantine Office
3 Product classification
This product can be divided into B, B, etc.,
3.6 Grade B net oil.
3.2 Grade B net oil, %,
Technical requirements
Technical requirements see table
Sleeve (%)
5 Test method
5.1 Determination of negative shape
See B/114458.
5.2 Evaluation of aroma
Xu Hongbao to Baopei Baoshang Kuaifei
County white gas
47.0-.63.0
Approved by the Ministry of Light Industry of the People's Republic of China in 1993-0429-1-
Implementation on 1993-12-01
G3,T 1445R.
5.3 Current determination of tower point
RGR/T 1415g.
5.4 Determination of acid value
See GB/T 14458
5.5 Determination of ester value
JG6/T 14458.
5.6 Definition of purifier content
See GB/T1448
6 Inspection rules
E1, "The factory inspection department is responsible for inspecting each batch of finished products. The factory should ensure that the products leaving the factory meet the requirements of this standard. Each batch of production should be accompanied by a quality certificate, which includes the manufacturer, product name, trademark, production date (or batch number), net weight, and the items of product quality that meet this standard. 6.2 The acceptance unit shall inspect whether the received products meet the requirements of this standard in accordance with the provisions of this standard. 6.3 For each batch of hydrogen, take two bottles below 1 and three bottles above 1. Take samples from 1 bottle. The total amount of samples should not be less than 100. When sampling, the samples should be fully stirred or dropped into the water below 66°C. Then, they should be poured into the sample mixer and cooled evenly. They should be put into two sample bottles filled with clean media. The following should be written on the bottles: product name, manufacturer, batch number, tax, sampling period and sampler. One should be used for inspection and the other should be kept for future reference. 6.4 If any of the indicators in the harvest do not meet the requirements of this standard, the manufacturer may review the new product together with the manufacturer. Detailed test results. If the test results still have unqualified indicators, the product will not be accepted. 5. When the supply and demand parties have disputes over product quality, they can negotiate with the parties or send the product to arbitration. The cost will be borne by the responsible party:
?
7.1 The white blue must be packed in special aluminum bottles with a net weight of 1k. Add plastic cover and padding when packing. The outer packaging box must be equipped with a plastic bag and a plastic bag. 2. The packaging bottle should be labeled with the product name, manufacturer name, batch number, and net weight. The product version must comply with this standard. The packaging should also indicate: manufacturer, product name, trade name, batch number, weight, net weight, number of bottles, factory date, etc. 7.3 This product should be stored in a dark environment with no ventilation, and the temperature should not exceed 40℃. It must be transported in strict accordance with the sun and sun, and must not be transported together with corrosive items and items with strong odors to avoid contamination. 4 Under the condition of proper transportation, complete packaging, and unsealed, the shelf life of this product is one year. —111--
Additional instructions:
Q8 179693
This standard is proposed by the Quality Standards Department of the Ministry of Industry. This standard is sponsored by the National Standardization Center. The drafting of this standard is led by Chen Xian, Chen Jinxiu and Zhang Zhou. This standard will be implemented from January 2017. The original light industry standard is QB4984. 112.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.