Some standard content:
1Cs_ 93. 080. 30
National Standard of the People's Republic of China
GB/T 8511:1-1995
Self-propelled vibratory rollers
Self-propelled vibratory rollers1995-12-20 Issued
1996-06-01 Implementation
National Mongolian Technical Supervision Bureau
National Standard of the People's Republic of China
Self-propelled vibratory rollers
Self-propelled vibratory rullers1 Subject Content and Scope of Application
GD/TB511.7
Generation ,
This series of standards specifies the basic technical parameters, technical parts, test methods, inspection markings, packaging, etc. of self-propelled dynamic rollers.
This standard applies to self-propelled vibratory rollers (hereinafter referred to as rollers). This standard does not apply to combined vibratory rollers. 2 Reference standards
GB/T4478 Performance test method for vibratory rollers B8422 Reliability test method for vibratory rollers GB/T13306 Labels
JG/T035 Solid pollution prevention and control for oil used in construction machinery and equipment JG/T5076.2 Vibrating bed road machine vibration reduction system inspection specification 3 Specifications of road rollers Basic parameters and dimensions The basic parameters of road rollers shall comply with the provisions of Table 1. 1
Type of work:
Trade diameter mm
Vibration rate Hs
Reporting force,
Theoretical recording period.
Distance from ground, mnl
Slope force
Minimum distance from ground. mm
General speed
Basic parameters and size Small
Medium
2 1416182225
11.51 22.53|5.544.5. 56780011|124UU-1OUU
500~1300
33--60
11-~55
U. 3- 1- 4
1 uUJ-~2 6u0
Note: The minimum height of the four-wheel vibrating road machine is allowed to be reduced by 50Y, approved by the technical supervision week of 19951220
96-9-1650
25--60
35~~25e
0. 3--3. 7
1109-3:00
Far1 Gu
-2 100
1- 3 ~4. c
1996-06-01implemented
CB/T $511. 1-- 1995
Multi-effect city road planning is in the city starting state. 4 Technical requirements
The design should be manufactured according to the established procedures, drawings and technical documents. 4.1 Energy requirements
4.1 The initial disassembly and nominal absorption of the road roller should meet the design requirements, and the design value of the allowable lifting time is 10. 4.1.3 The roller should have a good excitation effect, and the height of the upper frame should not be less than the human adaptability index> 6. The requirements of the energy level:
4.1. The various types of road rollers should be easy to use and flexible, and the rotation base of the disc should be in accordance with the requirements of Table 2 when the step head is turned:
The hand handle joint force
4.1.5 The road roller should have a good visual effect.
The braking performance of the compressor should meet the following requirements: the steering wheel should have a strong braking force on the slope as described above; when the vehicle is waiting in a non-excited state, its driving force must not be weak; when driving on a semi-straight road, the braking force must not exceed ten points as specified in the table. Table
On working.t.
Second dynamic sweep return speed, km/
10~ 12
:14--15
1i·18
>18--29
+25~22
322-22
Science and Technology Road Dynamic.1
On working quality interval.
214 --25
CB/T 8511.1—1995
Continued Table 3
Braking tree speed.k1/
3>13-12
212~14
:14--16
4.1.7 The small turning test diameter of the roller shall comply with the provisions of Table 4. Table 4
Small turning diameter
>2. D~ 2.
The sound limit of the roller should be in accordance with the table, 4.7-8
Indicates the machine's ears and the night
22. G ~3. 0
Outside the vehicle (7.5m to the left and right of the center of the machine, 1.5m at the production site: >The maximum height of the ticket
:-3. 0~1. 5
Limited value
9 After the 100h reliability test, the reliability evaluation index of the press shall meet the requirements of Table 6. 6
Average trouble-free working time
The press has good performance
The slope performance of the press shall meet the following requirements: When moving forward at a low speed, it can move forward slowly on a slope with a gradient of 0% when retreating: Index
3080 h
When the press is tested, the maximum traction of the press shall meet the requirements of Table 7
2. 5 --2. 0
+2. 3-~2. 1:
2 5 --. G
Tire finger movement
Maximum traction
Brake wheel state movement
3 5, 5
1. 3--3. :0. U-~ 12. 0
212. 0~ 14. 9
2-74, 0--15- 0
.-.6.0--18.0
x, u~2ik
> 20, 6--22. 0
22. n--25. th
GE/T 8511:1
Continued
Light tire
221: 5
2a25-4
The self-acceleration smoke exhaust speed of the positive tire is not more than R50 units. The various diameter gauges and signs of the positive tire should be marked clearly and audibly, which is convenient for observation. The roller should have the following:
Special features:
Front and rear traction devices,
Steering indicator cover (light tires may not be equipped); indicator signs of the working position of the lifting mechanism and the bearing parts. 1. Tool box.
4 .2、Manufacturing and assembly requirements
All parts and components must be inspected and qualified by the comprehensive inspection department before assembly.
4.2.2 The components and outsourced parts of the road roller must meet the relevant standards and drawings for inspection. They can only be used after confirmation of qualification.
4.2.3 The road roller shall not have leakage or water leakage. The number of wet and seepage points shall meet the following requirements: 3.
No more than 1 connection point!
No more than 1 water seepage point.
GA/T 8511.1:-1995
4.2.4 The road roller shall move forward at each gear and travel for a total of 1.5h. The oil temperature of its mechanical transmission system and the deactivation degree of lubricating oil shall meet the following requirements:
The temperature of the pool temperature shall not exceed 8UC
b. The oil temperature shall not exceed 40Tng/.
4.2.5 The cleanliness level of hydraulic oil in the hydraulic system shall meet the requirements of JG/T135. The hydraulic oil used in the road roller shall meet the following requirements:
a. The cleanliness level of solid particles in the hydraulic oil added to the oil tank shall not exceed 18/15. b. During the product performance test or quality test, after the hydraulic system has been working for 1.5h (the starting working time is not less than 0.5h): the hydraulic oil temperature shall not exceed 80°C; the cleanliness level of solid particles in the hydraulic oil shall meet the requirements of Table 8.
The gear system
The cleanliness level of solid particles in the hydraulic oil shall meet the requirements of Table 8.
The gear system
The cleanliness level of solid particles in the hydraulic oil shall meet the requirements of Table 8.
4.2.6 The fasteners of the moving parts of the driving wheel must be reliably protected. 4.2.7 The electrical weak lines of the roller should be well connected. The instruments, switches and buttons should be installed in a standard manner. 4.2-8 The roller should have a reasonable body and beautiful shape. Its appearance quality should meet the following requirements: The body should be well arranged and its edges should not be obviously bent. The cover should be installed firmly and accurately positioned to facilitate installation. The welds should be smooth without defects such as cracks, welds, weld nodules, pits and flying condensation. The surface of the parts should be free of defects such as flying condensation, scars and gas. 4.2.9 The paint layer of the main machine should be uniform, fine and smooth, with little flow, folding or thickening of the bottom layer. The main body color of the main machine should be bright, and the color lines should be clear and discernible. The paint film must be durable and have a certain hardness and elasticity. 5 Test method
5.1 The contents of 4.1.1, 4.1.8, 4.1.1~4.1.8, 4.1.10--4.1.12.4.2.5, 4.2.5, 1.2.9G.1 in this standard shall be tested according to GB/T4178
5-2 The contents of 4.1.3 in this standard shall be tested according to GB/T 5076.2. 5.3 The contents of 4.1.9 in this standard shall be tested according to GBB422. 6 Inspection rules
Road roller inspection is divided into factory inspection and type inspection. 6.1 Factory inspection
Road rollers should be inspected and certified by the quality inspection department of the road factory. They can be shipped only after the product is certified. The inspection should include the following:
Operation inspection
Brake inspection
Type inspection!
Inspection:
Transmission, hydraulic, water pedal and other system inspection, electrical system inspection
External filter quality inspection.
6.2 Type inspection
GB/T8511.1-1995
Road machine type control inspection includes type inspection and controllability test (war 400 five industrial or special inspection). The following are available:, production type inspection:
New products or old products are tested for full type identification, positive production demonstration, lamp structure, sample, process changes, which may affect product performance: b
National supervision agencies have put forward the requirements for type diagnosis. c
7 Sampling
Retrograde type qualification inspection adopts random shooting method 1 test whole machine 8 fixed 81 non-resignation machine out of the inspection $ double day all meet the requirements, the formulation of the product for the enterprise recruitment, otherwise the brush is judged as unqualified. 8.2 out! Environment inspection judgment method technical table 9 for. s
air transport special control insurance
commission according to
country's special inspection
special movement, children, water start guide system training add original change tour piano system all inspection
appearance measurement inspection about
out of the machine at each speed, cumulative time not less than%m should make F book. Years of experience before the guide chapter production
line: 1.6 requirements
will be 4.1.! ! requirements
report the continuous air tight movement 17mir.. small science has abnormal sound, children transmission bearing parts hope the party for: hot people phenomenon its report the movement frequency requirements should meet 4.1.2 report group meeting: -3. 8.3 If the road roller fails to meet the main performance indexes of this standard (see 4.1.1, 4.3, 1.1.5, 1.6 ~ 1.1.1, 4.2.3, 4.2.5, 4.2.6, etc.) after special inspection, it shall be judged as unqualified product. 8.4 If the road roller meets the main performance indexes of this standard after inspection, it shall be judged as qualified product after meeting the six key points of this standard. 85 If the road roller is classified as unqualified, double sampling shall be conducted from other products. According to the standard structure (no inspection shall be conducted if the performance index does not meet the standard). After re-inspection, one sample does not meet the qualified requirements. Then finally: the batch will be determined as a different product. 9 Marking, packaging, transportation, storage
9.1 Marking
91.1 Pressure rate machine flow Ding out! Call, in the film showing the bitter position of the strict capital or sticking research related mark hazards. Lelu machine product mark. Age has the following content: note the shadow mark;
starting market mark benefit
safety mark!
disinfection juice disinfection mark distance:
exploration and inter-industry indication coordination
product Le brand.
GB/T 8511.1 1995
9.1.2 pressure drop * product label space style, the smaller the heat format in line with 133 standards: "product standard item interpretation regulations manufacturing! Name
product model name:
heart long main code more
suitable! 9.2.1. The parts that need to be protected are packed in boxes with six printed parts: before the machine is assembled, it must be packed with all the accessories and the whole machine. 92.2. The whole machine must be assembled with all the accessories and the following documents: a. Product certificate: the instructions for the use of the machine and the engine: 9.3. When the whole machine is shipped, the vehicle must be locked and the front and rear wheels must be fixed with fasteners. 5.3. The machine must be transported within 100 km. .3.3 When the machine is towed for transportation, the speed should be 1H at the highest speed of the pressure station. The engine room should not be adjusted properly. 5.4.1 Store in a ventilated place facing the wind. If it is placed in a dry room, anti-rust measures should be taken. 6.4.2 Long-term storage should be carried out. The oil and water should be drained. The rubber bag of the driving wheel should not be deformed under small force.
Additional instructions:
The six standards of the East China Standards are approved by the Ministry of Machinery and Vehicles for long-term use. The comprehensive research and development of the international standards of the Ministry of Machinery and Vehicles will always pay attention to the effectiveness of the mechanical equipment. The international standards of the Ministry of Machinery and Vehicles will be implemented in the future. 55.1 The report will be invalidated.2! Environmental inspection judgment method technical table 9. s
air transport special control insurance
commission according to
national requirements for inspection
special movement, children, water start guide system training add original change tour piano system all inspection
appearance measurement inspection about
outline machine at each speed, cumulative time not less than%m should make F book. Years of experience before the guide chapter production
line station: 1.6 requirements
will be 4.1.! ! The requirements of
report the movement continuously for 17 mir.. There are abnormal sounds in the small subject, and the child transmission bearing parts hope that the frequency of the report should meet the requirements of 4.1.2. -3. J. The requirements of the infant
4.22.2
8. 3 After special inspection, the machine has not reached the main performance indicators of this standard (see 4.1.1, 4.3, 1.1.5. 1.6 ~ 1.1.1: If any of the requirements in 4.2.3.4.2.5 and 4.2.1 are not met, the product shall be judged as unqualified. 8.4 The road roller that has met the requirements of the performance indicators after inspection shall also be judged as a qualified product.
85 When the road roller is classified as unqualified, double sampling shall be conducted from other products. According to the standard structure (no inspection is required when the performance standard is not met), after re-inspection, there is still one sample that does not meet the qualified requirements. Then finally: the batch will be determined as a different file product. 9 Marking, packaging, transportation, storage
9.1 Marking
91.1 Pressure machine flow Ding out! Call, in the film showing the bitter position of the strict capital or sticking research related mark hazards. Lelu machine product mark. Age has the following content: Note Yin mark;
Starting market mark
Safety mark!
Disinfection juice disinfection mark:
Exploration and inter-instruction cooperation
Product Le brand.
GB/T 8511.1 1995
9.1.2 Pressure drop* The empty type of product label shall comply with the specification of 133: "Product standard material shall be explained in the specification of the material! Name
Product model name:
The main code of the product is:
Applicable! Number and production batch number
9.2 Over-installation
92.1 Road training product stock technical use or operation (except for special requirements). Protective parts, virtual help! . The accompanying small parts, complete parts and authorized six parts printed box packaging: before the moisture-proof measures, the complete parts and the whole machine must be placed together 92.2 The factory must be equipped with all service accessories and accompanying parts, and the following documents are attached: a.
Product certification
Underground machine and engine training instructions: bzxz.net
9.3. Complete machine installation During transportation, the vehicle should be locked with a relatively stable flow path and the front and rear wheels should be fixed with a guide block. 5.3. When the machine is being towed, the speed should be 1H and the maximum speed of the machine should be lowered. The driver should not make adjustments to the power system.
5.4.1 Store in a ventilated place facing the wind. If the room is dry, take measures to prevent the potential damage. 6. 4.2 The road is stored for a long time. The oil and water are drained. The wide rubber bag of the driving wheel is not allowed to be deformed under small force.
Additional instructions:
East China Standards are approved by the State Council for long-term design.
Six Standards are not approved by the Ministry of Machinery and Vehicles for the promotion of technology, mouth and mouth, and the effect of muscle machinery is always noted. The comprehensive research and development of the core system of the international standard of Shansi Equipment, Changsha, and the research and development of the accompanying equipment in the product is wide and Huajing. The second international standard should be strictly enforced, and the implementation of the technical standard will be invalidated. 55.1 The report is omitted from the implementation of the second international standard.2! Environmental inspection judgment method technical table 9. s
air transport special control insurance
commission according to
national requirements for inspection
special movement, children, water start guide system training add original change tour piano system all inspection
appearance measurement inspection about
outline machine at each speed, cumulative time not less than%m should make F book. Years of experience before the guide chapter production
line station: 1.6 requirements
will be 4.1.! ! The requirements of
report the movement continuously for 17 mir.. There are abnormal sounds in the small subject, and the child transmission bearing parts hope that the frequency of the report should meet the requirements of 4.1.2. -3. J. The requirements of the infant
4.22.2
8. 3 After special inspection, the machine has not reached the main performance indicators of this standard (see 4.1.1, 4.3, 1.1.5. 1.6 ~ 1.1.1: If any of the requirements in 4.2.3.4.2.5 and 4.2.1 are not met, the product shall be judged as unqualified. 8.4 The road roller that has met the requirements of the performance indicators after inspection shall also be judged as a qualified product.
85 When the road roller is classified as unqualified, double sampling shall be conducted from other products. According to the standard structure (no inspection is required when the performance standard is not met), after re-inspection, there is still one sample that does not meet the qualified requirements. Then finally: the batch will be determined as a different file product. 9 Marking, packaging, transportation, storage
9.1 Marking
91.1 Pressure machine flow Ding out! Call, in the film showing the bitter position of the strict capital or sticking research related mark hazards. Lelu machine product mark. Age has the following content: Note Yin mark;
Starting market mark
Safety mark!
Disinfection juice disinfection mark:
Exploration and inter-instruction cooperation
Product Le brand.
GB/T 8511.1 1995
9.1.2 Pressure drop* The empty type of product label shall comply with the specification of 133: "Product standard material shall be explained in the specification of the material! Name
Product model name:
The main code of the product is:
Applicable! Number and production batch number
9.2 Over-installation
92.1 Road training product stock technical use or operation (except for special requirements). Protective parts, virtual help! . The accompanying small parts, complete parts and authorized six parts printed box packaging: before the moisture-proof measures, the complete parts and the whole machine must be placed together 92.2 The factory must be equipped with all service accessories and accompanying parts, and the following documents are attached: a.
Product certification
Underground machine and engine training instructions:
9.3. Complete machine installation During transportation, the vehicle should be locked with a relatively stable flow path and the front and rear wheels should be fixed with a guide block. 5.3. When the machine is being towed, the speed should be 1H and the maximum speed of the machine should be lowered. The driver should not make any adjustments to the power system.
5.4.1 Store in a well-ventilated place. If the room is dry, take measures to prevent the leakage. 6. 4.2 The road is stored for a long time. The oil and water are drained. The wide rubber bag of the driving wheel is not allowed to be deformed under small force.
Additional instructions:
East China Standards are approved by the State Council for long-term design.
Six Standards are not approved by the Ministry of Machinery and Vehicles for the promotion of technology, mouth and mouth, and the effect of muscle machinery is always noted. The comprehensive research and development of the core system of the international standard of Shansi Equipment, Changsha, and the research and development of the accompanying equipment in the product is wide and Huajing. The second international standard should be strictly enforced, and the implementation of the technical standard will be invalidated. 55.1 The report is omitted from the implementation of the second international standard.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.