GB 3735.2-1983 Compression-type straight-through long connector
Basic Information
Standard ID:
GB 3735.2-1983
Standard Name: Compression-type straight-through long connector
Chinese Name:
卡套式端直通长接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB 3735.2-1983 Compression-type straight-through long connector body GB3735.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Straight thread long connector-BodyL
Marking example:
Nominal pressure| level, tube outer diameter D, 14mm ferrule end straight long connector body: connector J14GB3735.2-83
National Bureau of Standards 1983-06-17 Issued
UDC 621.643.4wwW.bzxz.Net
GB3735.2-83
Implementation on 1984-04-01
Nominal pressure
(bar)
Tube outer diameter
M12×1.5
M14× 1.5
M18× 1.5
M27×2
M33×2
M42×2
(M48×2
M50×2
M12 ×1.5
M18 ×1.5
M22 ×1.5
M27×2
M33×2
Note: ①The dimensions in brackets in column d are only for old products. GB 3735.2—83
②The weight is calculated value, and the specific gravity is 7.85kg/dm. The technical conditions are in accordance with GB3765—83. d
M10×1
M12×1.25
M16 ×1,5
M18 × 1.5
M 2U ×1. 5
M27 ×1. 5
M30×2
M33×2
M36×2
M42 *2
M45×2
M48 ×2
M52 ×2
M14 ×1.5
M18 ×1.5
M 20 ×1.5
M24 ×1.5
M27 ×1.5
M3× 2
M33×2
M36×2
M39 ×2
Limit deviation
Nominal small
Nominal ruler
Limit deviation
GB 3735.2—83
Limit deviation of displacement size
(kg/100 pieces)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.