JB/T 8713-1998 Categories, types and basic parameters of mechanical parking equipment
Some standard content:
ICS53.080
Mechanical Industry Standard of the People's Republic of China
JB/T8713-1998
Mechanical parking systems
Classification, models and basic parameters parameters1998-03-19 Issued
Ministry of Machinery Industry of the People's Republic of China
1998-07-01 Implementation
JB/T8713-1998
1 Scope
2 Referenced standards
3 Definition
4 Categories and types
5 Basic parameters
Appendix A (Standard Appendix)
Appendix B (Suggestive Appendix)
Appendix C (Suggestive Appendix)
Categories of mechanical parking equipment
Types of mechanical parking equipment
Examples of suitable vehicles·
JB/T8713-1998
This standard stipulates the categories of mechanical parking equipment, and regulates the items and parameter ranges of its types and basic parameters. It is one of the basic standards for mechanical parking equipment. This standard is formulated for the first time based on the research and analysis of samples, standards, technical reports and documents of mechanical parking equipment from domestic and foreign officials, associations, manufacturers and research institutions. Appendix A of this standard is the appendix of the standard, and Appendix B and Appendix C are the appendices of the tips. This standard is proposed and managed by the Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry. The responsible drafting units of this standard are: Beijing Hoisting and Conveying Machinery Research Institute of the Ministry of Machinery Industry and Mechanical Science Research Institute of the Ministry of Machinery Industry. The participating drafting units of this standard are: Chengde Jingcheng Science and Technology Joint Machinery General Factory, Shanghai Tiandi Complete Equipment Manufacturing Co., Ltd., Sichuan Donghua Machinery Factory, Hangzhou Xizi Stereo Garage Co., Ltd., Shanghai Jiaotong University, Guangzhou Hoisting and Conveying Machinery Industrial Company, Chengde Weber Conveying Machinery Co., Ltd., Chongqing Crane Factory, Changzhi Forging Machine Tool Factory, etc. The main drafters of this standard are: Wan Li, Yu Ning, Wang Kesheng, Gao Wenquan, Bu Xunbin, Zhang Changnan, Le Junde, Zhang Huiqiao, Huang Haishan, Wang Luchao, Peng Shian, Li Shiping.
1 Scope
Mechanical Industry Standard of the People's Republic of China
Mechanical parking systems
-Classification, models and basic parameters
Mechanical parking systems
-Classification, models and basic parameters This standard specifies the categories, models and basic parameters of mechanical parking systems. JB/T8713—1998
This standard applies to mechanical parking systems for parking cars, mini buses, small light buses and other vehicles with the same dimensions and weight as those defined in GB3730.1. 2 Referenced standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB3730.1—1988
GB/T3730.2—1996
GB/T 3730.3—1992
GB 69741986
3 Definitions
Terms and definitions of motor vehicles and semi-trailersVehicle typesVocabulary and codes for road vehicle quality
Terms and definitions of motor vehicles and trailers
Terminology of lifting machinery
The following definitions are adopted in this standard.
3.1 Mechanical parking systemMechanical or mechanical equipment system used to store and retrieve vehicles. 3.2 Parking unit
Specific locations in mechanical parking equipment used to park vehicles. 3.3 Transport apparatus
In mechanical parking equipment, the device or machine used to transport vehicles to parking spaces. 3.4 Horizontal Rotary Platform In mechanical parking equipment, a mechanical device that can rotate a vehicle horizontally by a certain angle (usually 180° or 90°) to change the direction of the vehicle.
3.5 Parking Capacity
The number of vehicles that a set of mechanical parking equipment can store at the same time. 3.6 Single Vehicle Maximum Time of Entrance (Ardeparture) refers to the time (excluding auxiliary time) required from the time a vehicle entry (or exit) instruction is given to park the vehicle in the most unfavorable position of the mechanical parking equipment (or take the vehicle out of the most unfavorable position) until the parking equipment can issue the next vehicle entry (or exit) instruction. Approved by the Ministry of Machinery Industry on March 19, 1998
Implemented on July 1, 1998
4 Categories and Types
4.1 Categories and Type Codes
JB/T8713-1998
The categories of mechanical parking equipment are divided according to their working principles. The category names and category codes are shown in Table 1. The definitions and schematic diagrams of each category are shown in Appendix A (Standard Appendix).
Lifting and Horizontal Movement
4.2 Types
Vertical Circulation
Horizontal Circulation
Multi-layer Circulation
Plane Movement
Aisle Stacking
Vertical Lifting
The types of mechanical parking equipment are divided according to their specific structures or configuration relationships, etc., see Appendix B (Suggestive Appendix). 4.3 Method of representation
Manufacturer specific code
Coding code for passenger car group
Number of passenger cars that can be parked in the equipment
Grouping code for size and weight of suitable vehicles
Storage capacity of mechanical parking equipment
Category code for mechanical parking equipment
General code for mechanical parking equipment
When parking of micro and light passenger cars is not required, the slash and the two symbols following it do not need to be marked. 4.4 Examples of expressions
Simple lifting
a) Mechanical parking equipment, lifting and lateral movement type, can park up to 19 medium-sized cars or less, of which up to 6 light-duty buses or less: PSH19Z/6K-
b) Mechanical parking equipment, vertical circulation type, can park up to 32 large-duty cars or less, and cannot park buses: PCX32D-
c) Mechanical parking equipment, stacking type, can park up to 120 large-duty cars or less, of which up to 20 light-duty buses or less: PXD120D/20K-
5 Basic parameters
5.1 Suitable for parking Vehicle size and weight
For vehicles suitable for parking in this mechanical parking system, according to their size (length, width, height and weight (including the vehicle curb weight defined in GB/T3730.3 plus the weight of 50kg of goods) defined in GB/T3730.2), they are divided into five car groups, namely X (small), Z (medium), D (large), T (extra large) and C (super large), and one passenger car group, namely K (passenger car), for a total of 6 groups, see Table 2. For examples of corresponding vehicle types (defined in GB3730.1) and brand models, see Appendix C (Suggestive Appendix). 2
Group code
5.2 Storage capacity
JB/T8713-1998
Vehicle length×vehicle width×vehicle height
mmXmmXmm
≤4400×1750×1450
≤4700×1800×1450
≤5000×1850X1550
≤5300×1900X1550
≤5600×2050X1550
≤5000×1850X2050
≤1300
≤1500
≤1700
≤2350
≤2550
≤1850
Based on the principles of economic rationality and ease of use, the storage capacity of a single set of mechanical parking equipment can be selected by referring to the recommended values in Table 3 Table 3
Lifting and lateral movement
Vertical circulation
Horizontal circulation
Multi-layer circulation
Plane movement
Aisle stacking
Vertical lifting
Simple lifting
Maximum entry (exit) time for a single vehicle
Storage capacity
12~130
12~1000
The maximum entry (exit) time for a single vehicle of mechanical parking equipment should be reasonably selected according to its use environment, region, purpose, etc. When no specific data requirements are put forward, you can refer to Table 4 to select Table 4
Maximum entry (exit) time for a single vehicle
Lifting and lateral movement
35~170
Vertical circulation
60-130
Vertical lifting
45-210
Simple lifting
30~110
JB/T8713-1998
Appendix A
(Appendix to the standard)
Categories of mechanical parking equipment
Categories of mechanical parking equipment are shown in Table A1. Table A1 Mechanical parking system for storing and retrieving parked vehicles by raising and lowering the storage plate or (and) lateral translation Mechanical parking system for storing and retrieving parked vehicles by using a vertical circulation moving parking space system Mechanical parking system for storing and retrieving parked vehicles by using a horizontal circulation moving parking space system ||Circulation: Mechanical parking facility for parking vehicles
Enclosed high tower
Entry and exit from the lower part
Two floors above ground
Lifting and lateral movement
Three floors above ground
Lifting and lateral movement
Enclosed high tower
Entry and exit from the middle
Single-layer horizontal circulation on the ground
Enclosed high tower
Entry and exit from the upper part
Two floors in the semi-underground
Lifting and lateral movement
Three floors in the semi-underground
Lifting Transverse movement
spread||low tower
lower entry
underground
two-story horizontal circulation
movement
parking space system|
retrieving||parked
vehicles
mechanical
parking
equipment
use
transport||t ... Mechanical parking equipment for parking vehicles uses a roadway stacking crane or a bridge crane to move the vehicle on the transporter horizontally and vertically to the parking position, and uses a storage and retrieval mechanism to store and retrieve the vehicle. 1) See the definition in GB6974.
JB/T8713—1998
Table A1 (continued)
Underground two-story circular circulation
Single-story horizontal movement
Use aisle stacking crane"
Single-story (or multi-story) horizontal reciprocating
Underground three-story square circulation
Use gantry crane
Multi-story horizontal movement
Use bridge crane
Use lifting
machine to lift the vehicle
to the designated layer and
use storage and retrieval machine
structure storage Mechanical parking equipment for vehicles with multiple cars Lifting or pitching mechanism for storing or taking out vehicles Simple mechanical parking equipment Longitudinal parallel parking spaces Radial parking spaces Lifting platform Vertical lifting Two floors above ground JB/T8713-1998 Table A1 (end) Horizontal parallel Parking space
Radial parking space
Lifting trolley
Vertical lifting
Two floors in semi-underground
Vertical and horizontal on the plane
Transfer to trolley
Vertical lifting
Three floors in semi-underground
Longitudinal string parking space
Revolving on the plane
Parking on the rack
Pitch lifting
Two floors above ground
JB/T8713-1998
Appendix B
(Suggested appendix)
Mechanical parking equipment Equipment type
The types of mechanical parking equipment are shown in Table B1. Table B1
According to the relative position to the ground
According to the relative relationship with other main buildings
According to the layout
position of vehicle entrances and exits
According to the relative relationship between vehicle entrances and exits
According to parking equipment parking spaces||tt ||Number of layers
By presence or absence
Horizontal rotation
By control
and management system
System technology level
Above ground
Semi-underground
Fully underground
Built-in type
Underground type
Independent type
Outdoor type
Entry and exit from the bottom
Entry and exit from the middle
Entry and exit from the top
Straight-through type
Bypass type
Return type
Double-row type
Single-layer type|| tt||Two-story
Three-story
Multi-story
High-rise
No level
Turntable
With built-in water
Flat turntable
With external water
Flat turntable
Manual
Semi-automatic
Fully automated
On the ground level or above the ground
Above and below the ground
Part of each
Below the ground
Inside other main buildings||tt| |In the basement of other main buildings
A closed parking facility is built separately
Independent of other buildings,
Independent of other buildings, and set up separately in the open air. The vehicle entrance and exit are located at the lowest part
The vehicle entrance and exit are located in the middle part
The vehicle entrance and exit are located at the top
The vehicle entrance is directly connected to the vehicle exit, and the vehicle entrance and exit can be staggered in parallel and non-positively aligned. The vehicle entrance and exit are combined
and the vehicle can turn around and drive out
Multiple entrances are in one row, and multiple exits are in another A row of parking spaces is arranged on only one level
Parking spaces are arranged on two levels
Parking spaces are arranged on three levels
Parking spaces are arranged on five levels and belowParking spaces are arranged on six levels and aboveNo horizontal turntable
There is a horizontal turntable placed inside the parking equipmentThere is a horizontal turntable placed outside the parking equipmentManual control and operation*
Some parts of the vehicle entry and exit actions can be performed automatically, and some are performed manually
All vehicle entry and exit actions and management are performed by computers, which is the preferred type.
It is an additional control method, which is only occasionally used during debugging and maintenanceo
No vertical ice levelMulti-layer tunnel true
Simple flat
Non-circulating circulating stacking lifting
Mobile lifting
JB/T 8713-1998
Appendix C
(Suggestive Appendix)
Examples of suitable vehicles for parking
This appendix lists the vehicle size (defined in GB/T3730.3), weight (defined in GB/T3730.2 as the curb weight plus 50kg of goods weight), vehicle type (defined in GB3730.1) and examples of common vehicle brands and models that are suitable for parking with mechanical parking equipment, see Table C1.
Table C1 Examples of Suitable Parking Vehicles
According to Table 2
Group Code
Fiat
Italywww.bzxz.net
Vehicle Brand
POLSKI
HAT126P
SKYLARKGHK7060
ALTO SC7080
RENAULT5
CHARADE TJ7100
Fiat
Golf
Former Soviet Union
HATUno55
FORDFIESTA 14S
Golf aLx
CITROEN ZX
Volvo
Skoda
Mazda
HYUNDAIEXCEL GL
LADA2107
VOLVO343
SKODA130GL
MAZDA323
Chrysler
Sundance
ROVER416GS
Jetta CL
CHRYSLER SUNDANCE Turbo
TOYOTA
NISSAN
BMW325iSE
Montello
Santana
Italy
COROLLA1.6DX
QVIC1.6EX
BLUEBIRD2.0SLX
ROVERMONTEGO2.0S
TOYOTA
CAMRY 20GLi
SANTANA
Main Theme
Passat
LANA THEMA V6
VOLKSWAGEN Passat2.0GI
BENZ300CE
Vehicle length×vehicle width×vehicle height
mmXmmXmm
3127×1382×1333
3285×1400×1360
3300×1405×1410
3510X1520×1400
3610X1600×1385
3644X1555×1432
3650X1590×1330
3985× 1664×1445
4071X 1688×1399
4089× 1602×1374
4128×1620×1388
4190×1660×1392
4200×1610×1400
4270X 1695×1375
4361X1709×1339
4370×1680×1400
4370×1685×1360
4385X 1674×1445
4395×1695×1375
4405×1690×1395
4433X1698X1393
4466×1710×1420
4516X1709×1400
4546X1690×1427
4590X1733×1433
4605×1720×1430
4650×1740×1410
Vehicle
Mini car
Mini car
Mini car
Mini car||t t||Mini car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Mid-class car
Ordinary car
Ordinary car
Ordinary car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car0GI
BENZ300CE
Vehicle length×vehicle width×vehicle height
mmXmmXmm
3127×1382×1333
3285×1400×1360
3300×1405×1410
3510X1520×1400
3610X1600×1385
3644X1555×1432
3650X1590×1330
3985× 1664×1445
4071X 1688×1399
4089× 1602×1374
4128×1620×1388
4190×1660×1392
4200×1610×1400
4270X 1695×1375
4361X1709×1339
4370×1680×1400
4370×1685×1360
4385X 1674×1445
4395×1695×1375
4405×1690×1395
4433X1698X1393
4466×1710×1420
4516X1709×1400
4546X1690×1427
4590X1733×1433
4605×1720×1430
4650×1740×1410
Vehicle
Mini car
Mini car
Mini car
Mini car||t t||Mini car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Mid-class car
Ordinary car
Ordinary car
Ordinary car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car0GI
BENZ300CE
Vehicle length×vehicle width×vehicle height
mmXmmXmm
3127×1382×1333
3285×1400×1360
3300×1405×1410
3510X1520×1400
3610X1600×1385
3644X1555×1432
3650X1590×1330
3985× 1664×1445
4071X 1688×1399
4089× 1602×1374
4128×1620×1388
4190×1660×1392
4200×1610×1400
4270X 1695×1375
4361X1709×1339
4370×1680×1400
4370×1685×1360
4385X 1674×1445
4395×1695×1375
4405×1690×1395
4433X1698X1393
4466×1710×1420
4516X1709×1400
4546X1690×1427
4590X1733×1433
4605×1720×1430
4650×1740×1410
Vehicle
Mini car
Mini car
Mini car
Mini car||t t||Mini car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Ordinary car
Mid-class car
Ordinary car
Ordinary car
Ordinary car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Mid-class car
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.