This standard specifies the series and basic parameters of wire and cable braiding equipment. This standard applies to braiding machines for braiding metal and non-metal shielding or sheathing of wires and cables, as well as braiding hollow lead braiding sleeves. This standard applies to braiding machines and can also be used to braid various non-metallic round or flat wires, belts and ropes. JB/T 5814.7-1991 Basic parameters of wire and cable special equipment Part 7: Braiding equipment JB/T5814.7-1991 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
Basic Parameters of Wire and Cable Special Equipment
Part 7
Braiding Equipment
1 Subject Content and Scope of Application
This standard specifies the series and basic parameters of wire and cable braiding equipment. JB/T5814.791
This standard applies to braiding machines for braiding metal and non-metal shielding layers or sheaths of wires and cables, as well as braiding hollow copper braiding sleeves. Braiding machines to which this standard applies can also be used to braid various non-metallic round or flat wires, belts and ropes, etc. 2 Models
The series models of braiding machines are shown in Table 1.
The product marking of braiding machines shall be specified in their type and size standards. 2.2
Series Models
Basic Parameters
8-shaped braiding machine series
Lever braiding machine series
Regressive braiding machine series
The basic parameters of PB series braiding machines shall comply with the provisions of Table 2. 3.1
The basic parameters of FH series braiding machines shall comply with the provisions of Table 3. 3.3The basic parameters of PG series braiding machines shall comply with the provisions of Table 4. Main purpose
Low speed braiding
High speed braiding
Low speed braiding
Table 2 Basic parameters of PB series braiding machines L-type, W-type main
Specification code
12/35×80
16/35×80
16/45×80
16/63×120
24/35×80
24/45×80
24/63×120m
24/80×120
Main parameters| |tt||Spindle size
Inner diameter
Wire diameter
Process parameters
Weaving material diameter
Single metal wire
0.05~0.10
2.0~10.00.07~0.15
Fiber wire
0.10~0.30
2.24~22.4
12012.0~25.00.20~0.30
0.10~0.40
3.0~12.0/ 0.05~0.15
5.0~20.00.100.30
10.0~30.0
15.0~35.0
Approved by the Ministry of Machinery and Electronics Industry on 199110-170.20~0.30
0.10~0.30
0.10~0.40
012.5~112.5
0.20~0.50
Auxiliary device
Paying-off device
200/400
400/500 |
630/800
500/630
630/800
800/1250
Number of units per group
1,2,5 , 10 | |48/45×80
48/80×120
56/35×80
64/35×80
72/35×80
Specification code
3/35×80
3/45×80
9/35×80
13/35×80
17/35×80
21/35×80
25/35×80
29/35×80
33/35×80
47/35×80
JB/T5814.7—91
Continued Table 2 Basic parameters of PB series braiding machines L-type and W-type main
Main parameters
Spindle size
Inlet wire diameter
Inner diameter width
Machine parameters
Process parameters
Weaving material diameter
Fiber wire
Single metal wire
6.0~16.00.05~0.15
10.0~35.0
0.10~0.30
25.0~40.0
25.0~70.00.20~0.30
10.0~25.0
0. 05~0.15
0.10~0.40
0.20~0.50
0.10~0.30
20.0~50.00.15~0.30bzxz.net
8012040.0~70.0.20~0.300.20~0.5020.0~40.0
30.0~50.d0.05~0.15
0.10~0.30
40.0~70.0
Includes L type and W type, the others are all L type.
16~160
22~200
28~270
25~225
32~270
45~360
26~235
30~315
45~400
Table 3 Basic parameters of PH series braiding machine
Main parameters
Spindle size
Braiding material diameter
Diameter inner width Single metal wire
0 .05~0.10
0.05~0.15
Fiber line
Outgoing line size width
15~135
Paying-off device
630/800
800/1250
1250/2000
800/1250
1000/1600
1250/2000
800/1250
1000/1600
1250/2000
Reeling device
630/800
800/1250
12501250/2000
800/1250
10001000/1600
125d1250/2000
800/1250
1000/1600
1250/2000
Reeling device||tt ||Wire taking-up device
Number of units per group
1，2,5，10
Number of units per group
1，2,5,10
Specification code
12/65×70
16/65×70
24/65×70
24/100×80)
32/100×80
Main parameters
Spindle size
Diameter inner width
Note: 1) Only W type.
Outer diameter of incoming wire
JB/T5814.7--91
Basic parameters of PG series braiding machines
Process parameters
Diameter of braided material
Single metal wire
Fiber wire
0.05~0.10
0.10~0.30
0.100.150.10~0.30
0.15~0.300.10~0.30
0.20~0.30
0.10~0.30
0.20~0.30
Additional Notes:
This standard was proposed and managed by Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by Shanghai Cable Research Institute and other units. The main drafters of this standard are Lu Jingxin and Ou Xuecheng. Section
L type, W type
Paying-off device
20～228
200/400
400/630
630/800
800/1600
1250/2000
Taking-up device
200/400
400/630
Number of units per group
630/800
1，2,5,10
800/1600
125d1250/2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.