title>HG/T 21636-1987 Glass fiber reinforced plastic/polyvinyl chloride (FRP/PVC) composite pipes and fittings - HG/T 21636-1987 - Chinese standardNet - bzxz.net
Home > HG > HG/T 21636-1987 Glass fiber reinforced plastic/polyvinyl chloride (FRP/PVC) composite pipes and fittings
HG/T 21636-1987 Glass fiber reinforced plastic/polyvinyl chloride (FRP/PVC) composite pipes and fittings

Basic Information

Standard ID: HG/T 21636-1987

Standard Name: Glass fiber reinforced plastic/polyvinyl chloride (FRP/PVC) composite pipes and fittings

Chinese Name: 玻璃钢/聚氯乙烯(FRP/PVC)复合管和管件

Standard category:Chemical industry standards (HG)

state:in force

Date of Release1987-08-01

Date of Implementation:1987-04-07

standard classification number

Standard ICS number:Chemical Technology>>71.120 Chemical Equipment

Standard Classification Number:Chemical Industry>>Chemical Machinery and Equipment>>G94 Non-metallic Chemical Machinery and Equipment

associated standards

alternative situation:Original standard number HGJ 515-1987

Publication information

other information

Publishing department:Ministry of Chemical Industry

Introduction to standards:

Original standard number HGJ 515-1987 HG/T 21636-1987 Glass fiber reinforced plastic/polyvinyl chloride (FRP/PVC) composite pipes and fittings HG/T21636-1987 Standard download decompression password: www.bzxz.net

Some standard content:

Industry Standard of the People's Republic of China
HG/T 21636- 1987
(FRP/PVC)
Fiberglass/polyvinyl chloride
Composite pipes and fittings
Published on January 8, 1987
1987-04-07
China National Chemical Corporation and the Ministry of Chemical Industry of the People's Republic of China
W Notice
According to the spirit of the notice on standardizing the use of standard codes issued by the State Bureau of Petroleum and Chemical Industry, the State Administration of Quality and Technical Supervision and the Ministry of Construction, after rectification, the original HGJ515-87 standard number was converted to HG/T21636-1987. All standard numbers "HGJ515-87\" appearing in this standard should be understood to have been converted to "HG/T 21636-1987\, that is, the original standard number BGJ515-87 has been cancelled and replaced by the new standard number HG/T21636-1987. All users and relevant personnel are requested to comply with this. 7 Notice!
National Chemical Engineering Construction Standard Editing CenterW.bzSOSO.cOm Industry Standard of the People's Republic of China
Glass Fiber Reinforced Plastics/Polyvinyl Chloride
(FRP/PVC)
Composite Pipes and Fittings
HG/T 21636-1987
Editing Unit: China National Chemical Engineering CorporationApproving Department: Ministry of Chemical Industry of the People's Republic of ChinaImplementation Date: April 7, 1987National Chemical Engineering Construction Standard Editing Center (formerly Engineering Construction Standard Editing Center of the Ministry of Chemical Industry)W1 Overview
1.1 This standard is based on the domestic research results and production practice of glass/polyvinyl chloride (FRP/PVC) composite pipes, and is compiled with reference to the Federal Republic of Germany Standard DIN1896616968,8063.1.2 FRP/PVC composite pipes have the characteristics of PVC pipes in terms of corrosion resistance and alkaline media corrosion resistance, and overcome the disadvantage of PVC pipes in terms of low compressive strength under temperature conditions. PVC pipe only plays the role of medium corrosion resistance, and the compressive strength is completely borne by the FRP reinforcement layer.
1.3FRP-PVC composite pipe is a layer of FRP added outside the PVC pipe. Due to the interface between the two, the adhesive makes FRP and PVC firmly form a whole. It can withstand a certain working pressure under the condition of <80°C. The working pressure of FRP/PVC composite pipes and pipe fittings in this standard under normal temperature conditions is 16~~4kgf/cm2 (gauge pressure). 1.4 According to the thermal distortion performance of the resin, the allowable working pressure of FRP/PVC composite pipes and the change of medium temperature are shown in the following table:
Nominal diameterbzxZ.net
65~150
200~300
350~600
The allowable working pressure P of FRP/PVC composite pipes at the following temperatures (-C) is kgt/en20
Note that the allowable working pressure value is obtained by internal drawing method. 66
.Description
&Fiberglass reinforced plastic polyvinyl chloride (FRP/PVC) composite pipes and fittings are the departmental design standards approved and promulgated by the Ministry of Chemical Industry. The contents of this standard include: General Principles: FRP/PVC composite pipe flange connection ring: FRP reinforcement structure diagram at PVC pipe butt welding: FRP reinforcement structure diagram at PVC pipe socket connection: FRPPVC composite pipe and fittings technical parts, etc.
This standard is proposed by the Process Piping Design Technology Center of the Ministry of Chemical Industry and edited by China Huanqiu Chemical Engineering Company. The editors are Yang Ziyi and Xia.
.2
Cabinet Overview
FRP/PVC Composite Pipe Flange Connection Diagram
Metric FRP/PVC Composite Pipe with Fixed Joint·FRPPVC Reduction
Metric Loose Flange
PVC Ring for Metric Loose Flange:
Metric Loose Flange Gasket
FRP Reinforced Fittings for PVC Pipe Butt Joints·FRP/PVC Skirt Flange Tee
FRPPVC Elbow with Flange
FRP/PVC Reducer
British FRP/PVC Composite Pipe with Fixed Joint (For 150 Pound Grade Loose Flange)British Loose Flange [160 Pound Grade]
British Loose Flange PVC ring for sleeve flange (150 lbs) Gasket for British slip-on flange (150 lbs) FRPPVC socket composite pipe
FRP reinforcement for PVC pipe socket joints FRP/PVC socket tee·
FRP/PVC socket adapter·
FRPPVC replacement and pipe technical conditions
2FRP/PVC composite pipe flange connection diagram
Interface adhesive
PVC strands
Interface adhesive
PVC welding
Drawing number or standard number
FRP/PVC composite pipe with fixed joint
Lip-on flange
GB90 1-76
GB51-76
Stud bolt
FRP/PVC
Hard PVC
Soft rubber
Specifications see looper
-WW.bzSOSO.cOm3 Metric FRP/PVC composite pipe with fixed joint L4000-6000
Interface adhesion, FRP
F good PPCt grinding
EPvC combination
Public teaching control nominal pressure, VC pipe
gf/cm2
FRP/PVCE
4FRP/PVC composite pipe
L4008000
FRP/PVC||tt ||Nominal true diameter nominal strength
PYC pipe
PVC purple
cured surface adhesive
FRP layer
filled
PTC# length
Nominal diameter common
kgf/emsi
5 metric slip-on flange
allowable deviation
95.5j40.5
all
material A9
4-Φ1a
head screw control
M12×110
silk-free
M18×130
M16x130
M16X130
Mle xt30
M1xts0
EM16x140
8-Φ23
12-523
12-433
16-023
20-430
M18x150
20X19
M20×180
M20X190
M22×210
M22X220
M27X260
WW.bzsosocom The Office of the Ministry of Industry and Information Technology is free to adjust
6 metric slip-on flange with PVC ring
PVC plate
W nominal weight diameter
Allow deviation
Metric slip-on flange with gasket
Allow evaluation and delivery
Material, soft quick glue, softest flow ethylene condensate (brand selected according to medium characteristics)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.