JB/T 10116-1999 This standard specifies the taper mandrels for parts with a diameter of 8 to 100 mm. This standard was first published in 1983 as JB 3402-83 and revised for the first time in 1991 as GB/T 12875-91. JB/T 10116-1999 Taper mandrels for machine tool fixture parts and components JB/T10116-1999 Standard download decompression password: www.bzxz.net

IC5 28.060.41
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Machine tool jigs and components
Taper mandrel
The paris and unlts of jigs and fixtureeTaper mendred
This standard selects the applicable jigs with a diameter of 100mm. 1 Referenced Standard
JB10L16-1999
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should try to use the latest versions of the following standards. GB/T 145-1985
GB/T 1[84-146
GB/T1298—1986
JA/T8044
3 Dimensions
Center hole
Shape and position tolerances, non-standard tolerances
Technical conditions for carbon tool shaving
Technical requirements for machine tool optical parts and components
The dimensions are shown in the following figure and table.
Used upper hole light B8~50mm
GBT14G
Guohao Machinery Industry Bureau approved on 1999-08-06 and implemented on 2000-01-01
Nominal diameter
(suitable aperture)
1:3000
[:s000
JB/T 10116-1999
Applicable T piece diameter adjustment 52~100mm
Public direct sales:
Applicable to 1 piece diameter)
1:30(K
1:3um
1:5000
:300K
L:3000
1:0KI0
JB/T10116—1999
Table ()
13 014
12 032
Nominal
(Applicable to 1 piece diameter)
1:3000
1 300G
T : 500)
1: 3000
1: 5000
1:300D
1:000
JB/T 10116-1999
Table (continued)
: 17.014
16 996
Nominal diameter||tt ||[Appropriate month 1. piece guide path]
1:3000
1:5000
E: 3000
1: 5000
1:5000
1: 3000
1:SUKIU
1:3000
JB/T10116—1999
Table (thread)
.19.972
23 972
Nominal self-tension
[Applicable material lead diameter
1 : 300)
1:S(KN)
: StX0
1:3000
1:5000
1 : HUrILA
1:3000
1:5000
1: SO0D
JM door.10116-1999
Table (continued)
25-062
32 D74Www.bzxZ.net
24 472
Nominal diameter
(Made Use 1. piece aperture)
1:3000
1:3000
[:5000
1:8000
1:3000
1:800G
JB/T 18116—[999
Yuan (Tong)
34,993
Nominal point diameter
(applicable L piece diameter)
1:3000
: sakxa
1:3000
t: 5000
L:5000
：g0Kk)
JB/T0116—1999
Table (Bin)
38:020
58 047
40,4174
39 966
Nominal diameter
Applicable 1 piece diameter!
1:3000
: 50CKJ
T: 8000
1: 3000
1:8000
: 300
1:5010K
1: 3000
1: 5000| |tt||JB/T 10116-1999
Table (continued)
.47.047
50 [12] | | tt | | tt | 1146 | | tt | | tt | 75
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.