HG/T 2274-1995 Silicon-magnesium semi-self-fluxing phosphate rock for calcium-magnesium phosphate fertilizer HG/T2274-1995 standard download decompression password: www.bzxz.net

Chemical Industry Standard of the People's Republic of China
HG/T2274—1995
Silicon-magnesium semi-self-fluxing phosphate ore for calcium-magnesium phosphate fertilizers1995-04-02 Issued
Ministry of Chemical Industry of the People's Republic of China
1996-01-01 Implementation
WHG/T2274—1995
This standard has revised HG/T2274—92 "Silicon-magnesium semi-self-fluxing phosphate ore for calcium-magnesium phosphate fertilizers". In this revision, based on the domestic resource situation, taking full account of the use requirements, and combining with relevant standards, the technical indicators of P205≥20.0%MgO≥3.0% in the previous version were cancelled, and the others were retained as qualified products; the writing rules were carried out in accordance with GB/T1.1-1993. This standard replaces the chemical industry standard HG/T2274-92 of the Ministry of Chemical Industry from the date of implementation. This standard is proposed by the Technical Supervision Department of the Ministry of Chemical Industry of the People's Republic of China. This standard is under the jurisdiction of the Chemical Industry Design and Research Institute of the Ministry of Chemical Industry. The responsible drafting unit of this standard is the Chemical Industry Design and Research Institute of the Ministry of Chemical Industry. The participating drafting units of this standard are: Jingxiang Phosphorus Chemical Industry Company, Xinyang Phosphate Fertilizer Factory, etc. The main drafters of this standard are: Wang Heping, Zhao Zhiquan, Wang Hailiang. This standard was first issued in March 1992.
This standard is entrusted to the Chemical Industry Design and Research Institute of the Ministry of Chemical Industry for interpretation. I
WW.bzsoso.cOm Various American Standards Industry Data Free Download Scope
Chemical Industry Standards of the People's Republic of China
Silicon Magnesium Semi-Self-Fusing Phosphate Ore for Calcium Magnesium Phosphate Fertilizer This standard specifies the technical requirements, test methods and inspection rules of silicon magnesium semi-self-fluxing phosphate ore. This standard is applicable to silicon magnesium semi-self-fluxing phosphate ore for calcium magnesium phosphate fertilizer produced by blast furnace process. 2 Cited standards
HG/T2274—1995
The clauses contained in the following standards constitute the clauses of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T1250—89 Methods for expressing and determining limit values ​​GB/T1868—1995 Methods for sampling and sample preparation of phosphate rock and phosphate concentrate GB/T1871.1—1995 Determination of phosphorus pentoxide content in phosphate rock and phosphate concentrate by quinoline phosphomolybdate weight method and volumetric method GB/T1871.3—1995 Determination of alumina content in phosphate rock and phosphate concentrate by volumetric method and spectrophotometric method GB/T1871.5—19 95 Determination of magnesium oxide content in phosphate rock and phosphate concentrate GB/T1873-1995 Determination of silicon dioxide content in phosphate rock and phosphate concentrate Flame atomic absorption spectrometry and volumetric method
Gravimetric method and volumetric methodwwW.bzxz.Net
GB/T2007.7-87 General rules for sampling and sample preparation of bulk mineral products Particle size determination method Manual screening method 3 Requirements
The technical indicators of siliceous and magnesian semi-self-fluxing phosphate rock for calcium magnesium phosphate fertilizer shall meet the requirements of Table 1. Table 1 Technical indicators
Phosphorus pentoxide (P20s) content, %
Magnesium oxide (Mg0) content, %
Silicon dioxide (SiO2) content, %
Aluminum oxide (Al20) content, %
Particle size, mm
1The contents of each component are calculated on a dry basis.
2 The particle size index of unprocessed ore can be negotiated by both parties. 18.0
(Qualified products)
12.0~32.0
15~100 (less than 15mm and not more than 5%)
3 The technical index of phosphate ore used in electric furnace method, cyclone furnace method, etc. can be negotiated by both parties with reference to this standard. 4 Test methods
4.1 The preparation of analytical samples of siliceous and magnesia semi-self-fluxing phosphate ore for calcium magnesium phosphate fertilizer shall be carried out in accordance with GB/T1868. 4.2 The determination of phosphorus pentoxide (P20s) content shall be carried out in accordance with GB/T1871.1. 4.3 The determination of magnesium oxide (MgO) content shall be carried out in accordance with GB/T1871.5. Approved by the Ministry of Chemical Industry of the People's Republic of China on April 2, 1995 and implemented on January 1, 1996
Wbzsoso.cOnHG/T2274—1995
4.4 The determination of silicon dioxide (SiO2) content shall be carried out in accordance with GB/T1873. 4.5 The determination of alumina (A120s) content shall be carried out in accordance with GB/T1871.3. 4.6 The determination of particle size shall be carried out by visual method or GB/T2007.7. 5 Inspection rules
5.1 The sampling of analysis samples of siliceous and magnesian semi-self-fluxing phosphate ore for calcium-magnesium phosphate fertilizer shall be carried out in accordance with GB/T1868. 5.2 Ores of the same grade and sent to the same user at the same time are considered as one batch. 5.3 Each batch of ore shall be inspected by the quality inspection department of the production unit, and the production unit shall ensure that the phosphate ore supplied meets the technical requirements of this standard.
5.4 The user has the right to inspect the quality of the received phosphate rock in accordance with the provisions of this standard. If there is any objection, it should be raised within 15 days after the arrival of the goods.
5.5 This standard adopts the "rounded value comparison method" specified in GB/T1250 to determine whether the inspection results meet the requirements of the standard. 5.6 When the supply and demand parties have objections to product quality and need arbitration, the relevant product quality arbitration provisions in the "Product Quality Law of the People's Republic of China" should be followed.
6 Marking, labeling, packaging
6.1 Each batch of phosphate rock should have a quality manual, which includes the name of the production unit, product name, product grade, quality index, product net weight, batch number, delivery date and this standard number. 6.2 Phosphate rock from different delivery batches should be stacked separately. 2
W.bzsoso.cOm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.