This standard specifies the parameters of heavy-duty horizontal lathes. This standard applies to newly designed general-purpose heavy-duty horizontal lathes with a maximum swing diameter of 1000 to 5000 mm on the bed and a maximum workpiece weight between the centers equal to or greater than 10 tons. JB/T 3663.2-1998 Parameters of heavy-duty horizontal lathes JB/T3663.2-1998 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T3663.2-1998
Heavy Horizontal Lathe
Published on July 17, 1998bzxz.net
National Bureau of Machinery Industry
Implemented on December 1, 1998
JB/T3663.2—1998
This standard is a revision of JB177176 "Parameters of Heavy General Lathe". When revising, refer to relevant foreign standards and company product samples, combined with domestic conditions. The main changes in technical content compared with the original standard are: the maximum workpiece weight of the specification with a maximum rotary diameter of more than 2000mm on the bed is increased by 1.25 common ratio. From the date of implementation, this standard will replace JB1771-76 at the same time. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of Wuhan Heavy Machine Tool Research Institute. This standard was drafted by: Qiqihar No. 1 Machine Tool Factory, Wuhan Heavy Machine Tool Factory, Shanghai Heavy Machine Tool Factory, Qinghai Heavy Machine Tool Factory. 1 Scope
Machinery Industry Standard of the People's Republic of China
Heavy Horizontal Lathe
This standard specifies the parameters of heavy horizontal lathes. JB/T3663.2—1998
Replaces JB1771—76
This standard applies to general-purpose heavy horizontal lathes with a maximum rotary diameter of 1000~5000mm on the newly designed bed and a maximum workpiece weight between the centers equal to or greater than 10t.
2 Parameters
The type of heavy horizontal lathe is shown in Figure 1. The parameters of the machine tool should comply with the provisions in Table 1 Figure 1
Maximum rotary diameter D on the bed
Maximum workpiece length L
Maximum workpiece weight between centers
Types of heavy-duty horizontal lathes
Parameter table of heavy-duty horizontal lathes
Note: The parameters in the table are the basic series values. If the user has special requirements, they can be negotiated with the manufacturer. Approved by the State Machinery Industry Bureau on July 17, 1998 4000
Implemented on December 1, 1998
Machinery industry standard
Parameters of heavy-duty horizontal lathes
JB/T3663.21998
Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*||tt ||1/16 printing sheet 1/4 word count 4000
Book size 880×1230
First printing in October 1998
First edition in October 1998
Print count 00,001-500
Cost 5.00 yuan
98-108
Mechanical Industry Standard Service Network: http:/AvwwJB.ac.cn86
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.