GB 19269.2-2003 Safety specification for performance inspection of dangerous goods packaging for road transport
Some standard content:
Chapter 4, Chapter 5 and Chapter 6 of this standard are mandatory clauses, and the rest are recommended clauses. CB 19269.2—2003
4 is a standard for the safe transportation of dangerous goods by public transport. It is one of the standards for the inspection and approval of dangerous goods packaging for highway transportation and the inspection and approval of dangerous goods packaging for highway transportation. This standard is used in conjunction with the second edition of the Standard on the Transportation of Dangerous Goods (Revised No. 12) and the original version of the Standard on the Transportation of Dangerous Goods. The standard has been revised in accordance with (T200) A hazardous item specification appendix of the international standard, this standard is proposed and exported by the National Technical Committee for the Administration of Hazardous Chemicals (84/TC251), this standard is called the city single chemical: Shandong Ao people point inspection and proofreading, handed over to the Ministry of Science and Technology Institute, this standard is drafted by the Anhui Export-Import Inspection Bureau, Jiangsu Export-Import Inspection and Quarantine Bureau, Tianjin General Administration of Customs Inspection, Beijing Export-Import Inspection Bureau, Production\Xi'an 11 entry inspection and inspection and other related people: Zhang Xinkao, Chang Lijun, Shu Zhenfan, Ting Jiancai, Wei Dao, Feili. The standard is formulated for the first time,
highway transport dangerous goods packaging inspection safety specification performance inspection
an international standard that has more practical highway transport dangerous goods packaging inspection requirements, and the inspection method can be tested. CB 19269.2—2J03
This standard is applicable to the inspection of packaging of dangerous goods for highway transportation under the following conditions (except for Class 2, Class 7, and Class 25 of 31269.1-2232 of the first year of the year).
This standard does not contain any packaging with a net weight of less than 4 kg. 2 Normative references
The following clauses are applicable to the standard and become the clauses of the standard through reference to this standard. They are referenced documents of the specified period and their contents (including the contents of this package) or subscriptions shall not be used in this standard. However, the latest version of the referenced document shall be used by the parties who have reached an agreement based on this standard. =48.，Test method for packaging load capacity (G/4857.31992.1S0)224:1985)
T1%7.5-:*92 Test method for transport package drop test "e2802248:1085) G3/1741 Color packaging airtightness test method GB19233.12003 Inspection method for safe transport of dangerous goods packaging 3 Terms and definitions
，3\，1 First-class documents and definitions applicable to this standard: 4 Requirements
4.1 Screening rate and rating rate of the test
41.1 The sealant shall be tested for effectiveness after its design model is put into use. The modified design model is of different design, material and material thickness, but it can include various surface designs. It is also packaged only when the designed height is smaller than the designed model. 4.1.2 For samples of all produced equipment, the test shall be repeated at the time intervals specified by the competent authority. 4.1.3 For equipment with modified design, material or design, the test limit shall be reached. 4.1.4 The test will be conducted in a small area with a company's own end, and the inner size is smaller or the net size is smaller, as well as the content of the part is reduced. When the product is used, it is allowed to select the content. 4.1.5 If the outer container of the container has passed the test, it does not need to look at the relevant type of content or change the content. The different types of inner containers can be packed together in the selected outer container. In addition, if the same piece of water can be provided, the following contents can be handled without the need for testing:
The same content can be scanned with the same size:
The content has not been designed and tested Examples of good quality images include good shape, length, shape, etc. The content of the device can be identified by the scientific material, the material, the adjacent mechanical or human characteristics, the original test code, the signature part:
The internal degradation can be smaller through the closed installation technology design, the screw navigation product pregnancy benefit year: 1
GI19269.2—2003
The additional sealing is tight enough to sit on the 4th floor of the machine to remove the child's content during the period of obvious movement; the content of the device can be improved in the whole device and the design is related to the country's education. The result will be discussed in the discussion of the material of the padding that can prevent the content from being obviously moved. Then the content of the device can be less tested and the content of the next generation model can be improved.
4.1.6 The article is a product that is installed with a body or liquid and is compatible with the contents of an external device. It can be tested under the following conditions:
When the device is installed with an old device that has an internal energizer, it should successfully pass the teaching test: 1. The modification of the warranty period is also a
. The total weight of each container shall not be less than half of the original weight of the container. The thickness of the padding between the internal and external devices shall be used as the storage capacity. It should not be lower than the original corresponding standard. For example, the original test of the device should not be more than one month. The thickness of the padding between the internal and external devices should not be less than the original standard. If the content is less or smaller (compared with the content in the joint test tray, the product content must be checked and the outer container must be of the same quality). When the content is not moved, the test code must be checked. The content of the same packaging should be determined according to the standard drop rate of the device used in the door: the liquid should be completely broken by the material around the container, and its amount is sufficient to absorb all the frozen contents; the inner container should be equipped with a non-leakage-proof tube or a non-leakage-proof outer container. When the end occurs, the inner container should be equipped with any material. For example, the lining can be either leak-proof or other similarly designed. For effective penetration of the stomach, the liquid content should be placed in the correct liquid packaging between the parts;
The penetration device is marked in accordance with 9.1-03, indicating that the Class 1 packaging has passed the group test, and the cup is designed to be a sample of the external storage. The contents can be taken care of by the economic test described in the above. This package should be marked with the letter "\" as described in Section 4 (1-4). 4.1. The non-capital bureau may delay the requirements of this section of the safety stock specification to conduct tests to verify the design quantity number of the batch production narrow device production unit. 4.1.8 Because the full cost is required to be used as a layer of leather or polyester, the main test should be carried out After the package is guaranteed to maintain its performance range. The results of the test in 4.1.9 will be shown in the correct performance, and the test items may be extended separately. 4.1.10 The content of the container shall be tested and marked according to the applicable starting point of the container or the inner container, except for the following circumstances:
When the test is carried out, the new or complete material shall be water, and the water in the container shall not exceed its maximum limit of 5%. Additives such as packaging shall be calculated to achieve the required total packaging quality, and the waste of other effective positions will not affect the test results. Or, when the test is carried out, it may be changed according to the following reasons: b) Container The test results of this test are as follows: Containers marked with the wording as described in 6B192eS.12003, 1.4, 4.1.11 Each container to be equipped with rollers shall pass the appropriate airtight test under the following conditions and be able to achieve 5? 1.1 If the test water is indicated, before the first use of transport, after modification or restoration, and before the dry tank is used again, if the test results are affected, the composite container may be tested under the condition of returning the container number. 2.2 Preparation of containers for testing 2.1.1.1.1.2 ... For single container or in a container, the liquid content is reduced by 10% below its maximum content, and the content of the material is not written as its maximum content. For combined containers, the solid content of the container will be shown in the table, and the liquid and the solid content must be tested separately. 19263.2-2003
For the finished article, other materials will be replaced by other materials. The results of the test will be slightly different. There are six points, and the replacement of the material with the replacement stem must be unique and have the same maintenance properties (quality, size, etc.). Filled with travel materials, such as needles, in order to meet the requirements of the total quality of the packaging, only the space they collected does not set the test results: 4.2.2 The temporary test of the surface of the hoop body is carried out, and other materials are added with light. The material must have similar buckle and viscosity to the material. The requirements can also be used for the test of 4.1.5.Paper and voucher plates are placed in a heat-resistant container and subjected to relative humidity for 21 hours. The following 3 methods should be used: temperature (212): and relative humidity 6: 2: after the temperature exceeds 23°C and gradually increases to (65%-12%) or temperature (272): 2: Note: the average temperature in these uses may cause the product to flow and have a greater impact on the shelf.
4.2.4 Before the test, fill it with water and place it in a small container for at least 2114.2. For plastic composite containers and coated containers, the six structures must be inspected before the intended transportation of dangerous goods! Carry out compatibility test at the end of the 4th and last 24 hours. The test products should be placed in the same sealed cellar with twisted airtight containers. The time is 5i. After the business period, the samples shall be tested as listed in .1.5.2, 5.1 and 5.1. If the substances contained in the plastic barrel may cause the plastic to produce a large rate of cracks or stress, there should be two such substances in the barrel. If the substance is stored in the plastic barrel to a certain point, or the plastic is stored to a certain point, the sample should be placed on a plate with a weight greater than that of the sample. The total number of related samples or parts should be changed. The minimum height of the sample in the vehicle is 3 meters
4.3 Inspection items
In addition to the eight inspection items commonly used in road transport hazardous materials, new composite devices (plastic materials) (except TA1) that are intended to be installed with liquid medicines that are not easily accessible should also be subject to a sea permeability test. For wooden structures, the test method should be analyzed step by step.
5 Test methods
5.1 Drop test
5.1.1 Test quantity and drop method
For each type of equipment, the test efficiency and drop rate are shown in Table 1. In addition to the embedding rate of the surface, the center of gravity should be placed on the vertical point above the impact point: the drop test may not be carried out on the weakest part, and the test should be carried out on the most difficult part. Table 1 Trial registration sample whole and falling square inside
bed inside book or book new outside the enterprise called belt
liquid combination barrel
big color barrel
year version insert
look at the feeling practice
light printing label cloth gold product container
this celebration 113
take the falling piece company
case time fall (use, a long product year bottom with convex
then the mountain same road border tour on my side.
the first time to bake the capital Sichuan 3 product store
with the effect of the war road this style thing through the most version of the part of the note city flower rush. ·Creation plan to fee, or
teacher-list rush to learn the excitement 1..
CB 19269.22033
Dayi Tianfan
rubber a reimbursement
red board
the shape of the device
rotate, there is a single message
dream single note Guangyang welcome or forget method
container (, because porcelain
death rough stuffy can>
5.1.2 drop test sample Han Te spider preparation
Table 1 )
Test selection fee
Each team must use 1
(each practice 3)
(each purple Hua! time)
Use 1
Union for the store
First fire talk road: bottom flat delivery:
First drop promise: page one balance!
Wine delivery stop: long his face flat double:
First practice and other text messages!
The hundredth land activity: for skin, etc.,
Half·time practice login·fixed surface production Europe·
First fire skin quantity, reduced and changed:
First department end Ministry of Industry and Information Technology, etc.,bZxz.net
First time falling road: wide network production wind
First time both name: help evil fall.
Customer equipment store department five small life attack home
:, the world has a small world master in the surrounding access
-bottom movement light up,
double lower container test · will be the test sample by its internal temperature change group 1 must be lower: a)
Plastic road;
School samples other than soaking materials;
Composite container (to be);
Combination container with a solid material other than plastic bag. According to this requirement, the detailed test of each drug product is exempted from the conditioning of 42.3. The test liquid should be kept dripping and anti-aging agent must be added during the test.
5.1.3 Test equipment
The test equipment shall comply with the requirements of the second test equipment in G1VT1857.-1922. The test room (box) shall meet the requirements of 5.1.2 and 4.2.3.
5.1.4. Drop height
For the following test items, if the test is carried out with a physical product of basically the same physical properties as the test liquid, the drop height is shown in Table 2.
Table 2 Drop height
One state
For no body. If the test is carried out for a long time: 1 Class packaging
For example, the relative density of the material to be transported is not more than 1, how much, how much storage is reduced? "Inflammation packaging
If the relative density of the material to be transported is not more than 1.2. The drop height of the material is calculated by pulling the two degrees of the material into the table 3. The four h people take the first - the number of the following)
Main category packaging
Table both drop height and density are converted
GB19269.2-20C3
Unit within meter
Blood
2) For the standard gold bottom runner, when transporting materials with a height exceeding 20nm/, 1) The relative density of the material is not passed 1.2. The drop height is shown in Table 4. Drop height
Central packaging
m packaging
Single pulling technique
2) If the relative pressure of the material to be transported exceeds 1.2, the drop height of the whole process shall be calculated according to the old impact strength of the material (2) (including the fourth one, make decimals)
Table 5 Drop height and density change nose
Medical packaging
5.1.5 If the test is passed, then
5.1.5.1 When the internal and external pressures of a container reach a balance, there is no leakage at the bottom, and there is an internal () layer of transportation, and its internal (chain) room However, for the containers, the contents of the containers, such as air containers (such as ceramic containers), must be intact and balanced.
5.1.5.2 The contents of the containers must be subjected to drop tests and controlled by blood. All the contents must not be contained in empty containers (such as scientific bags). Even if the packaging is leak-proof, the sample must pass the test. 5.1.5.3 Composite or combined containers or common external containers may affect the safety of the company. There must be no leakage of contents from the inner part or the inner container: if there is any leakage inside (the bottom of the container is required), the contents must not be contained. 5.1.5.2 The outermost layer or the outer storage of the light shall not be damaged. 5.5 When the sealing device is sealed, there shall be no leakage of explosive materials or any rupture that may cause the explosive materials to leak out of the container. 5.2 Airtightness test √ 5.2.1 Test details Quantity of products 3 for each test sample 5.2.2 Special preparation of test samples before test The vents shall be closed. 5.2.3 Test equipment
Requirement of 17344
5.2.4 Test method and test pressure
When the passenger bag is sealed, the internal pressure is increased. The test method does not affect the packaging:
Three-meter airtight test pressure
One package
Other suitable pressures with at least equal effect can make Ding Meiran
2 Pa
CB19269.2-2C03
5.2.5 Pass these criteria
All samples are leak-free.
Hydraulic (internal pressure) test
5.3.1 Maximum number of test samples
Each design pressure number is ten whole column products.
5.3.2 Special preparation of the vent before the test
For the fixed device with ventilation, the vent hole must be blocked by the airless seal. 5.3.3, test each
pressure-deficient hazardous materials packaging test or other test equipment with corresponding effect. 5.3.4 Test method and test pressure
5.3.4.1. The gold exhibition equipment and complex equipment (anti-Swiss, porcelain and rough commercial porcelain! Including its sealing state selection, should be controlled by the test pressure of mir. Plastic container and synthetic solution (plastic) package live sealing device, so that it can withstand the test pressure of 3) min, the effect - the force is the bed marked by the engraving (111521--200 in the whole chapter, the system should not make the test conclusion effective, the test force point is close to the cutting ground, evenly maintain the set pressure (gauge pressure) applied during the entire test period, press any one of the force proofs to determine: a) not less than the total gauge pressure of the three specified in the equipment (the total gauge pressure of the installed gas is added with air. Other precious gases are added, and the original 1417 yuan is multiplied by the safety purchase number! 5 of this total gauge is based on (192.1.-20 0*The minimum amount of the 5th lucky bear or the single and 15 loading flow bottom is determined;) The minimum test is not less than 100ka: the air pressure of the transport body is not guaranteed to be 1.500 when the gas is full, the value is recorded as 000ka for the small test of the intended loading liquid [k is 250ka
5.3.4.2 The required K for the transport energy cannot be obtained, and the test is carried out according to the actual table 70,000. Table 7 Commercial pressure test pressure
Not less than 255
5.3.5 Test criteria
There should be no test block,
5.4 Code test
5.4.1 Or according to the number of samples
Each design model receives 3 actual inspection products,
5.2.2 Test equipment
According to the requirements of T137.3.
5.2.3 Test method and stacking load
Not less than
Mountain type package
Less than 100
In the test details of the original surface of the state of my situation - this or can be realized in the old still in the delivery to determine whether it can accurately be out of the same number of packages with the total mass. Half of the test sweep, the person loaded with no companions for the purpose of harm and the intended drop of this different, then the latter should be calculated, also including the test sample of small land code high quality card 5 can be armed test time for materials, the proposed installation of the scientific ladder known composite capacity sJTT! And r12 should be guaranteed to ensure that the source of about 4c ℃ test d average code test load according to the formula: ||tt| | Such as my load, unit is grams (kF)
-stacking height (not less than 3 units in meters (m); heat - a single starting height, unit is (㎡); X
: single packaging, unit f grams g:
a little bit - when calculating the appropriate decimal point, pay attention to the decimal point: 5.4.4 Test criteria
GI19269.2—2003
The test sample does not contain lead. The test sample is not allowed to be transported by the customer. The wax may cause damage to the packaging or flow into a certain shape. Before making a judgment, the plastic machine should lower the ambient temperature. 5. 5.5.1 Number of samples
Take one test sample for each type of barrel
5.6.2 Test method
Make a full-length barrel with a diameter of more than 1/3 of the barrel above the middle, and the diameter of the barrel above the middle shall not be increased. 5.5.3 Test criteria
The increase in the diameter of the barrel shall not cause any problem. 5.6 Test
5.6.1 Number of samples
Take one test sample for each type of barrel
5.0.2 Test method
The test room shall be installed in a natural way or with a standard liquid. After that, the test shall be carried out under the condition of wet waste fire for 23 days. The quality of the test shall be calculated based on the total permeability.
5.6.3 Test criteria
5.7 Test report
5.7.1 The report shall include the following information: Name and address of the test structure:
1) Sichuan wheel office and also (if applicable):
Test The special benefit of the report book
test clinical complaint business change date:
delivery device manufacturer:
wear dense design model, for example, small, financial judgment through the internal device to enjoy the change, etc. 1, also recruit judgment suitable for light: example, large method, card called in addition to the standard and/or photo collection:
degree of production:
) test content: test woman did not pass the station meeting relative to the store body of the whole diameter test said man and result:
form test report must be submitted to the student, etc., write the name of the student. 5.7.2 The general notice contains the following notes: The goods supplied for transportation have been tested in accordance with the relevant requirements of this standard: 5.7.3 The inspection method must be effective in the first place. 6 Inspection rules || tt || 6.1 The factory should ensure that the packaging of the goods for highway transportation is in compliance with the standards. For the purpose of inspection, please follow the relevant standards.
6.2 When the following conditions occur, the performance test should be carried out: GB192E.2--2UU3
-- When a new product is put into production, "a general performance test should be carried out during the production change: After normal production, the dynamic structure, materials, and process have undergone major changes, which may affect the product performance; When production is stopped, once every six months:
- After a product has been discontinued for a long time, the national production department should conduct a performance test: 6.3 The performance test cycle is 2-3 months: 3 times a month, and the inspection period for a new design number is 3-3 months. If three consecutive qualified products are used, the inspection cycle can be reduced to one level: If a product fails once, the inspection can be carried out again for one period: 6.2 The market inspection effect can be reduced to one level within the original period of retention inspection , the number of random inspections within the inspection period is 1 month and 3 months, and the 63 levels are once, twice and three times respectively. The product should not be inspected more than two times each time. 6.5 The packaging consulting service is sufficient to meet the requirements of the self-service production plan: 2 months, for the packaging device that has reached the end of its validity period, the validity period of the device will not exceed (months) calculated from the date of completion of the qualification. 6.6 For the reused container, the validity period of the repaired or converted container shall not exceed 6 months calculated from the date of completion of the teaching. 6.7 For the inspections specified in 7 to 6.7, the container with each certificate number shall be inspected for the following items: First, if one of the six tests fails, it shall be determined that the item fails on the specified day. As long as the right item fails, the item will be counted out. The model container will not be qualified,
6.8 For those that fail the inspection, the design model of the container is not allowed to be used to hold dangerous goods for road transport, and the rest must be inspected again. When the product is submitted for qualification again, the product status remains unchanged. Attached is the "Standardized Record" of Various Commonly Used Public Transport Dangerous Goods Packaging Containers to Be Tested Table 4.1 Gives the "Winter and Commonly Used Public Transport Dangerous Goods Packaging Containers to Be Tested. Table, Test Item Table
Full Weekly Pass*
Average Capture and Intelligence:
School Guard Battle Barrel
4# Barrel
Welcome the power to roll
Taran Wood Prayer
To the Combination of Me
Ran Sitting Technology
year who device
have shallow love protection
foot movement
festival movement
non-movement movement
: Sichuan activities
item activity new film
product, activity
some Di's
special belt or I
GB13269.22503
GB19269.2—2003
micro-combination installation: style
gold combination flower: point
ground, porcelain formation
economically caused manufacturing enterprise
smart installation consulting device
this book social history coating staff
China certificate solution
shadow layer, waterproof inner
table n, 1 tContinued?
Model technology and external example plug
Plastic stopper and the sensitive addition to
Expansion data and export persimmon
Plastic transfer: Guangxi and external aluminum end or rack box
Scientific and technical research
Model machine road external stock combined barrel
Plastic road external rubber station
Device external maintenance box
Onboard and external creation
The damage
Expansion device, external aluminum persimmon||tt ||Device 1 external bonding difficult items
Device external stone nursing case basket
Device 1 external fiber reinforcement barrel
Device and external external file station
Device and external plastic science device
Only medical benefits
""This test purpose
Let three or more; the table of liquid-filled instruments, after the bottom of the trachea test I and the liquid currency test monitoring +
Store Rui test city hall
Test specification report also specification or no table B, 1.
Appendix
(Qualification Appendix)
Test (detection) report list
Table K.1Test [inspection) report type
Dangerous goods transport frequency also loaded transformer license control monitoring authorized person
Name and profit support
Self-installed heart device teaching
Loading goods must move
Light weight according to
Packaging user
This order is valid
Ends at
Effective amount
Stem mixed effect salt
Production three friends| |tt||Dyeing device
Date:
GB19269.2—2003
Relative rate (liquid turbulence>
Pseudo-wave protection base (normal)
Joint with the same number
show the remaining number of German digital screen stations
Note: The user of the device can contact the quality inspection department for quick identification, and the details of this report can be submitted to the quality department for verification, H
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.