This standard is modified to adopt Type IV strapping tape (extruded polyester strapping tape) in ASTM D3950-2006 "Specification for Strapping Nonmetallic (and Joining Methods)". This standard specifies the classification, specifications, dimensions, requirements, test methods, marking, packaging, transportation and storage of polyester strapping tape for packaging. This standard is applicable to strapping tapes made of polyester (polyethylene terephthalate, abbreviated as PET) as the main raw material, which are formed by extrusion and unidirectional stretching and are used for packaging and strapping with manual tools or automatic strapping machines. The main differences between this standard and ASTM D3950-2006 are as follows: - Some specification parameters are supplemented; - The provisions for strength classification are added and the minimum breaking force is specified according to the strength grade; - The provisions for terms and definitions, and specification compilation methods are added; - The requirements for sickle bend of machine belts are supplemented according to BSEN 13394:2001; - The requirements for test equipment, test standard atmosphere and specimen state adjustment are in accordance with the provisions of my country's national standards. GB/T 22344-2008 Polyester strapping tape for packaging GB/T22344-2008 Standard download decompression password: www.bzxz.net
This standard is modified to adopt the IV type strapping tape (extruded polyester strapping tape) in ASTM D3950-2006 "Standard Specification for Strapping Nonmetallic (and Joining Methods)". This standard specifies the classification, specifications, dimensions, requirements, test methods, marking, packaging, transportation and storage of polyester strapping tape for packaging. This standard is applicable to strapping tapes made of polyester (polyethylene terephthalate, abbreviated as PET) as the main raw material, which are formed by extrusion and unidirectional stretching and are used for packaging and strapping with manual tools or automatic strapping machines. The main differences between this standard and ASTM D3950-2006 are as follows: ———Partial specification parameters are supplemented; ———Provisions for strength classification are added and minimum tensile strength is specified according to strength grade; ———Provisions for terms and definitions, and specification compilation methods are added; ———Supplementary requirements for machine belt sickle bending according to BSEN 13394:2001; ————Test equipment, test standard atmosphere and specimen state adjustment requirements are in accordance with the provisions of China's national standards.

The clauses in the following documents become clauses of this standard through reference in this standard. For all dated referenced documents, all subsequent amendments (excluding errata) or revisions are not applicable to this standard. However, the parties who reach an agreement based on this standard are encouraged to study whether the latest versions of these documents can be used. For all undated referenced documents, the latest versions are applicable to this standard.
GB/T191 Pictorial marking for packaging, storage and transportation (GB/T191-2008, ISO780:1997, MOD)
GB/T1040.1-2006 Determination of tensile properties of plastics Part 1: General (ISO527-1:1993, IDT)
GB/T1040.3 Determination of tensile properties of plastics Part 3: Test conditions for film and sheeting (GB/T1040.3-2006, ISO527-3:1995, IDT)
GB/T1250-1989 Methods for expressing and determining limit values
GB/T2918-1998 Standard environment for conditioning and testing of plastic specimens (idt ISO 291: 1997)
GB/T 8170-1987 Rules for rounding off values ​​
GB/T 17200 Technical requirements for tensile, compression and bending testing machines for rubber and plastics (GB/T 17200-1997, idt, ISO 5893: 1993)

1CS 55. 040
National Standard of the People's Republic of China
C/T223442008
Polyester strapping for packaging2008-08-26Released
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of ChinaStandardization Administration of the People's Republic of China
2009-02-01Implementation
8/22344-2008
AT3200 Non-metallic strapping and connecting tape and joint teaching square standard follow dcoSurappinNotmetailieandJonirigMethodsr (Polyester strapping) standard A5TM390200Compared with the main equipment, the following specifications are added. The minimum tearing force is increased according to the provisions of degree classification and the minimum tearing force of the film grade. Increase the meaning of the language and specifications of the method of production according to SN1335: 2001 porcelain machine with inlaid ten thousand sets of fee requirements "practice Weng equipment, test comfort atmosphere and Bin sample state requirements according to the provisions of our medical garden home standard grasp this standard elegant national packaging standard Yan chemical technology home food will appear snacks this standard limited fish fee starting unit: Changzhou Jindongmen Keji Yue Co., Ltd., this standard elegant participating teaching unit: Nantong Ju Plastic Vehicle Color Decoration Co., Ltd. Zhou Jiaogong Yaoqi, Zhi, Haishengxiao, Zhu Gaolai, Zou Kexin, Fan Guangquan, Baibiao tender 1
packaging with beautiful buckle shoes
G8/1 22344-2008
Request bad elegant rules and regulations for the packaging arrangement of the film Yao Li palm (the following is a brief description of you and me with points of beauty, beautiful style, size palm, request, report method bridge benefit, want to install the new letter
things explore the media to use the child to gather fees (I request a net micro-flying tide, the abbreviation code is the raw material of the baby after the fine sample Xie La Shen Cheng moved! Dance bottom feeling monkey into the packaging fine tie Yue increased the move I section 2 normative reference documents
down to the document in the service terms humble suggestion request standard reference mouse must become the terms of this standard, all the circulation period of the reference, its good new micro-speaking single (no you take the wrong content! Or the version is not transparent for this standard, of course, according to this standard, the most important parties to the research is the management of the healthy translation of these documents, from the scanning period of the guide document, the most basic color service is not applicable to the technical standard, 6B/15 packaging wrong porcelain graphic standard benefit (GB/T 191--2008.IS0 F80:199:M0D) 100.1200 Determination of tensile properties of materials Part 1 General test 1S05271993.11040.3 Determination of tensile properties of materials Part 3: Test pieces for bacterial film and detachment (GB/T140.33006,150 527-3:1898,3D
B1250039 Method of expressing limit values ​​and judgment method B/298093 Standard environment for adjusting the state of plastic specimens (011S0291:1397) 7&.-3
Teaching standard group
GB/T1728℃ Rubber title withdrawal force, ability, tightness wearing test machine technical requirements (G8/T1720139?.,1S0 6833: 1993)
3 Explosion Science and Technology Standards
B/? 0.1 The following terms and definitions apply to this standard. 3.1
MBR
Abstract
This is related to the classification and labeling of the connection points and the product classification
, 1.1 According to the reporting method, it can be divided into real-motor machine city system abbreviated as machine, Code) box hand number two real use flip gift can (simple style Huahui, slow generation, town management slightly idle
4.12 egg nominal photography system should be divided into external people, 1 full level, certificate calculation see Wu (1:: c. Generally small control large measurement room
nominal cooperation Tibetan merchant rely
minimum hang-up solution actual value single is the most:
nominal national area single supply is square meter (1\). g is not less than RMPa for level I.
G11 22344---2008
day solution M is less than M density,
4.2 product specification end system method
4.2.! Product specification density bundling method guide, specification code group end degree code mouse flow: degree code (41.)
Wei Ge code (Wei.22)wwW.bzxz.Net
Norway reporting code (read, 1,
4.2.2 format book individual # business audit number activity level oh teaching maintenance code nominal width · main code government training license limit: 9 my water police consultation room price
18H table public secret information service 1
5 requirements
bundling quantity
anti-defect
, 1,2 color line
5.1.3 smooth surface embrace exposure
5. 1. 4 current replacement
tide small dense eyes
the small break square
public cover co Tan's light density wave light belt
Real respect for the outer top
Table remote smooth light
Standard shadow
Fox Island extraction
Public education degree
Regulation code
989t-48
as5038
555257
195382
105067
111031
111025
Full source degree/certificate
On the belt with declining business pattern clear and safe
Want to relax and identify the connection connection teaching
: 13unhs2c
: 2 250
I suu
120073
127013
-27963
Guide me, Meike Kang photography and other photography use
degree comparison of the main end of the change?r
is not less than
Dai order station between the rules
in 1
Meng Xiaochaosili/
, m nominal degree
2NA:
Current price letter guide (international degree public school degree!
12217!
127826||t t||152255
15007s
156089
156391
150022
135102
136111
109061
160050
380060
The length of the roll adjustment is "
5.2 specification for the inch difference
The smooth surface chrysanthemum pull joint is now static silkworm number factory
Roll 1 ()
G8/T 22344-2008
Chengge Heritage Public Funds Home Delivery: mm public figure m1672
155553
183393
19:12?
Conform to the order and entertainment record!
Minimum light is
O adt?
330:0:17:
12 730
11 120
Science surface is not flower business, with marriage as the only share of the equipment and the use of the wide equipment and the garbage of the light cabinet tie up the public I thank the estimate, the order loan network should be separately stipulated embossing requirements and thickness change hope breaking force service parameters. The size of the bundle gift is in line with the following regulations: 5. 2.3
The width of the fiber screen is larger than
The thickness is allowed to be above 0.
Customers need to put (packing 1 guard the person's plan of the nominal width, nominal original length, minimum tensile force and other specifications, table 5.2.4
Micro-card flower reference teaching, color number ordering agreement regulations #5 square cellar
rail load feeling is not more than 1 infant requirement:
magic width m for broadcasting my people 15mm/0
b) case fee 12mm not more than the vehicle starting source penalty Li is not more than 126mm200mm5.4 Mechanical properties
5, and 1 tensile force
source Zazan's tensile strength shall not be lower than 1 to avoid the feeling of teaching breaking force 5.4.2 The tensile body fracture deformation
shake replacement of the inverted plastic deformation should be within 1%2 case implementation. GB/22344--2008
6.4.3 Joint strength
5, #3.1 The breaking strength of the joint connected by hot melt shall not be less than the minimum tensile strength specified by the manufacturer.
5.4.3.2 The tensile strength of the joint connected by fasteners shall not be less than the minimum tensile strength specified by the manufacturer.
5 Test method
Name.1 Test conditions
5.1. Standard test environment and sample state adjustment6, 1. Read the standard test environment code 23/ and grade 2 specified in GB/12318:1998, that is, the test environment is 3 "agent with a temperature of 50°.
6..1.2 The standard environment for arbitration shall be in accordance with the standard environment code 23/50 and grade 1 specified in GB/T 31319: that is, the test environment is 2 degrees relative humidity and 1 degree relative humidity. 6.1.1.3 The test shall be conducted by randomly selecting 5 products of the same specification within 72 hours of production. 1 piece of tape shall be removed from each roll and a 3m long sample shall be prepared. A total of 100 samples shall be provided for inspection and the test status shall be adjusted within 24 hours. 2 The test equipment and instruments shall comply with the provisions of 48/317200. The accuracy of the negative indication of the testing machine shall be within -.1% of the actual value. The accuracy of the negative indication device shall not exceed 6% of the actual value. The test machine should be adjusted so that the maximum load during the test is within the full range of 3. The length of the test machine should be adjusted to avoid elongation of the sample during the test. 6.1.2.2 When carrying out the load-breaking deformation test, the meter should comply with the provisions of GB/T172C0 and can measure the change of the sample with an accuracy of no more than 1% of the relevant standard. 6.1.2.3 The sample's barrenness and thickness should be measured with a scale with a reading of c.c1mm and a flat end. 6.1.3 The sample should be loaded with a special tool that can be loaded. The tool should not be damaged. The sample should not slip during the test. 6.1.4 Data correction and judgment The correction should be made according to GB/T70. 6.2 External soul || tt || 2 In the environment of no light, the measurement of the feeling of greed. 6.2,? Use a steel ruler with a graduation value not greater than 110 to measure the whole before the roll is adjusted, and measure 4 points at the intersection of the points, and take the arithmetic average value of the whole as the measurement value. 6.2 The store shall check the roll joint according to the production records and the latest production mark, and put it in accordance with the requirements of 5.1.5. 6.2.4 Check the length of each roll according to the instructions on the packaging. If it meets the requirements of 1.1.6, use a meter to measure the length during the inspection or a certificate or report the allowable deviation. 6.3 Specifications and allowable deviations. Take a sample of 1m in length (5 samples are sent without a box) and divide it into two pieces (the total width and length of the sample are obtained by the number of pieces (the sample should not be subjected to the layer force before the measurement). The measured wind is ten, take the arithmetic average and adjust the width to the decimal point, and the thickness to the decimal point. The test is to use the steel with a scale value of 31mm or larger to install and measure. The average value is the integer of the measurement precision. Take a 2m long sample strip from each of the 5 sample strips. Cut the long axis of the sample at an angle of 2 degrees and place the sample freely. GB/T 22344---2008
flat title, with plexiglass to find the transmission and micro-solve the network tide training with flat teaching of the auxiliary real strict teaching velvet with micro-two creations of the right angle of the 9 double-name ruler to write the 2m adjustment ruler to load the maximum use of the largest Bo Xie sense of the business, with a knife bend, with 5 samples to measure the mouse to continue the most research as a Xie industry. 6,5 mechanical properties bear
6.5.1 teaching breaking force and tensile strain
1 test Xiang Chang Kang teaching standard dance and special Shuang tools is the middle bowl width, really directly you take the length of the sample on the war to take the effective sample number:
5 I tested G/1046 into the #test group of #10c The tensile strength at break shall be 100m/100m/2. The tensile strain at break shall be read according to the test sample length: ||tt| ... 2 Joint strength
: Except for the elongation, the maximum strength and flexibility of the joint shall be tested. During the test, the middle of the sample shall be held, and the overall technical value of the joint when pulled off shall be taken from the upper part of the connector. The force selected shall be calculated according to the percentage of the selected control force. Joint strength:
The effective number of test drops is 5. The average value of the stretch value of the samples is taken as the test result. The number of positions shall be taken. 7 Marking, packaging, transportation, storage
7.1 Label
7.1.1 Product marking
The product shall contain product information and certification information: Manufacturer name, product name, current price 7.1.2 Packaging
The packaging box shall be marked with "name, product name, value, type, specification, grade, length, product standard number and GB/T191 graphic mark. 7.2 Packaging
The packaging material shall be light and light during transportation, and the product shall be kept away from heat sources in frozen warehouses. 2.3 Transport
The transport tray shall be light and light, and should be protected from sunlight and moisture. 7 Recommendations
The product should be stored in a cold storage medium, and kept away from heat sources. #Above, no publicity, normal pile mother business reading no crown
GB/T 22344-2008
Chinese people's English and medical
national standard
package crack and cool insert breast belt
GB2T 22814 2008
China Education Ya Publishing House TOEFL version distribution
Bei Xiang Fuxing Gate Foreign Fruit Extension Institute National
Postal code:
E w. pc. net. cr?
Tel: 5833384663317548
Standard Society Curtain Hao
Each supervisor Xinhua Book its classics
Slippery version 895x1230 1/10
205 year 21 week ·
2308 January - issue
Price%: 155066 -1 36427 pet price 14,00 Liu has canned
handle the company's distribution center to exchange
embedded Chinese police congratulation
slow freezing will be investigated
report phone: (010) 88533533
8007-827 1/103 Specifications and their allowable deviations
631 Take a 1m long test specimen (5 samples are sent as boxes) and divide it into two pieces with the same width and length as the test piece. (The width and thickness are the total number of decimal places. When measuring, the test specimen should not be subjected to the measured force before the test. Take the arithmetic average and trim the width to about the decimal point. The thickness is about the decimal point. The test length is 632. The steel model with a graduation value of 31mm or larger is used for installation and measurement. It is advisable to select the appropriate points. The average value is trimmed to an integer as the measurement precision. 6.4 Yingli
Take a 2m long test specimen from each of the 5 sample strips. Cut the specimen at an angle of 2 degrees to the long axis and place the specimen freely. GB/T 22344---2008
flat title, with plexiglass to find the transmission and micro-solve the network tide training with flat teaching of the auxiliary real strict teaching velvet with micro-two creations of the right angle of the 9 double-name ruler to write the 2m adjustment ruler to load the maximum use of the largest Bo Xie sense of the business, with a knife bend, with 5 samples to measure the mouse to continue the most research as a Xie industry. 6,5 mechanical properties bear
6.5.1 teaching breaking force and tensile strain
1 test Xiang Chang Kang teaching standard dance and special Shuang tools is the middle bowl width, really directly you take the length of the sample on the war to take the effective sample number:
5 I tested G/1046 into the #test group of #10c The tensile strength at break shall be 100m/100m/2. The tensile strain at break shall be read according to the test sample length: ||tt| ... 2 Joint strength
: Except for the elongation, the maximum strength and flexibility of the joint shall be tested. During the test, the middle of the sample shall be held, and the overall technical value of the joint when pulled off shall be taken from the upper part of the connector. The force selected shall be calculated according to the percentage of the selected control force. Joint strength:
The effective number of test drops is 5. The average value of the stretch value of the samples is taken as the test result. The number of positions shall be taken. 7 Marking, packaging, transportation, storage
7.1 Label
7.1.1 Product marking
The product shall contain product information and certification information: Manufacturer name, product name, current price 7.1.2 Packaging
The packaging box shall be marked with "name, product name, value, type, specification, grade, length, product standard number and GB/T191 graphic mark. 7.2 Packaging
The packaging material shall be light and light during transportation, and the product shall be kept away from heat sources in frozen warehouses. 2.3 Transport
The transport tray shall be light and light, and should be protected from sunlight and moisture. 7 Recommendations
The product should be stored in a cold storage medium, and kept away from heat sources. #Above, no publicity, normal pile mother business reading no crown
GB/T 22344-2008
Chinese people's English and medical
national standard
package crack and cool insert breast belt
GB2T 22814 2008
China Education Ya Publishing House TOEFL version distribution
Bei Xiang Fuxing Gate Foreign Fruit Extension Institute National
Postal code:
E w. pc. net. cr?
Tel: 5833384663317548
Standard Society Curtain Hao
Each supervisor Xinhua Book its classics
Slippery version 895x1230 1/10
205 year 21 week ·
2308 January - issue
Price%: 155066 -1 36427 pet price 14,00 Liu has canned
handle the company's distribution center to exchange
embedded Chinese police congratulation
slow freezing will be investigated
report phone: (010) 88533533
8007-827 1/103 Specifications and their allowable deviations
631 Take a 1m long test specimen (5 samples are sent as boxes) and divide it into two pieces with the same width and length as the test piece. (The width and thickness are the total number of decimal places. When measuring, the test specimen should not be subjected to the measured force before the test. Take the arithmetic average and trim the width to about the decimal point. The thickness is about the decimal point. The test length is 632. The steel model with a graduation value of 31mm or larger is used for installation and measurement. It is advisable to select the appropriate points. The average value is trimmed to an integer as the measurement precision. 6.4 Yingli
Take a 2m long test specimen from each of the 5 sample strips. Cut the specimen at an angle of 2 degrees to the long axis and place the specimen freely. GB/T 22344---2008
flat title, with plexiglass to find the transmission and micro-solve the network tide training with flat teaching of the auxiliary real strict teaching velvet with micro-two creations of the right angle of the 9 double-name ruler to write the 2m adjustment ruler to load the maximum use of the largest Bo Xie sense of the business, with a knife bend, with 5 samples to measure the mouse to continue the most research as a Xie industry. 6,5 mechanical properties bear
6.5.1 teaching breaking force and tensile strain
1 test Xiang Chang Kang teaching standard dance and special Shuang tools is the middle bowl width, really directly you take the length of the sample on the war to take the effective sample number:
5 I tested G/1046 into the #test group of #10c The tensile strength at break shall be 100m/100m/2. The tensile strain at break shall be read according to the test sample length: ||tt| ... 2 Joint strength
: Except for the elongation, the maximum strength and flexibility of the joint shall be tested. During the test, the middle of the sample shall be held, and the overall technical value of the joint when pulled off shall be taken from the upper part of the connector. The force selected shall be calculated according to the percentage of the selected control force. Joint strength:
The effective number of test drops is 5. The average value of the stretch value of the samples is taken as the test result. The number of positions shall be taken. 7 Marking, packaging, transportation, storage
7.1 Label
7.1.1 Product marking
The product shall contain product information and certification information: Manufacturer name, product name, current price 7.1.2 Packaging
The packaging box shall be marked with "name, product name, value, type, specification, grade, length, product standard number and GB/T191 graphic mark. 7.2 Packaging
The packaging material shall be light and light during transportation, and the product shall be kept away from heat sources in frozen warehouses. 2.3 Transport
The transport tray shall be light and light, and should be protected from sunlight and moisture. 7 Recommendations
The product should be stored in a cold storage medium, and kept away from heat sources. #Above, no publicity, normal pile mother business reading no crown
GB/T 22344-2008
Chinese people's English and medical
national standard
package crack and cool insert breast belt
GB2T 22814 2008
China Education Ya Publishing House TOEFL version distribution
Bei Xiang Fuxing Gate Foreign Fruit Extension Institute National
Postal code:
E w. pc. net. cr?
Tel: 5833384663317548
Standard Society Curtain Hao
Each supervisor Xinhua Book its classics
Slippery version 895x1230 1/10
205 year 21 week ·
2308 January - issue
Price%: 155066 -1 36427 pet price 14,00 Liu has canned
handle the company's distribution center to exchange
embedded Chinese police congratulation
slow freezing will be investigated
report phone: (010) 88533533
8007-827 1/10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.