JB/T 8718-1998 This standard is a revision of ZB J84 016-89. This standard specifies the types and basic parameters, technical requirements, test methods, inspection rules and marking, packaging, transportation and storage of rail-type rock drills. This standard applies to rail-type rock drills powered by compressed air. JB/T 8718-1998 Rail-type rock drill JB/T8718-1998 Standard download decompression password: www.bzxz.net

IC5 73.100
Machinery Industry Standard of the People's Republic of China
JB/T8718-1998
Rail-type rock drills
Drifters
Published on March 19, 1998
Taoyuan Machinery Industry Ministry of the People's Republic of China
Implemented on July 1, 1998
JE/181
This standard is a revision of the 2BJ831 rail-type rock drill. This standard has the following major technical changes compared with ZB.184C15-89: 170 specification has been added to the "rotatable" column of the product series; two indicators, "idling speed" and "torque", have been added to the basic parameters of the standard; the "noise value" has been converted from rated noise to production efficiency numbers, which can replace 2B184016-8. This standard was issued by the National Technical Committee for Standardization of Rock Drilling Machinery and Pneumatic Tools Proposed and attributed to: This standard was drafted by: Shangjing Engineering Machinery. This standard was drafted by: Yisheng Xie, Xu Wenliang, Zhang Hong, the standard was first issued in 1952 and revised for the second time in 1989. 1 Standard
Machinery Industry Standard of the People's Republic of China
Guided Rock Drill
Drifterg bzxZ.net
JB/I8718—1998
Generation ZR JXA2IR-
This standard specifies the type and basic functions, technical requirements, test methods, inspection rules, specifications, installation, operation and storage of rail-type rock-cutting machines.
This standard is applicable to rail-type rock-cutting machines powered by sub-gas. 2 Referenced standards
The relevant provisions contained in the following standards are considered as the text of the standard by reference in this standard. The versions shown are valid at the time of publication of the standard. All standards will be revised to ensure that all parties to the standard can keep the latest version of the standard. G6 2828--87
tB6285
G5568-86
JR/T1590-96
JB 3576:84
J5/T 4041—$4
13/T7161-93
JB/T716293
I5/ 7163-93
JB/T 7164-3
JB/T 716563
TT/T 7302-- 94
ZBJB101486
3 Types and basic data
Batch inspection report count is the following modified sample table (for continuous inspection) Rock drilling machinery and pneumatic tools performance test methods Rock drilling machinery and pneumatic tools
Out of the city and pneumatic tools
Replacement machine and pneumatic tools
Breaking rock machinery and pneumatic tools
Out of machinery and pneumatic tools
Temporary rock drilling machinery and pneumatic tools
Instantaneous production weight measurement six methods two-pass method
Strict product model comprehensive system
Preventive Rust-proof technical parts
Product standard operation general detection method
Heat treatment parts general technical parts
Structural brake melting right casting general technical parts
Rock drill connection and pneumatic tools
Steel equipment general technical conditions
Xie rock machine carbon and pneumatic work number
Dense rock machinery and pneumatic tools
Machine Yi Ning pneumatic tools
Business rock machinery and pneumatic tools
3.1 Products or rotary types are divided into:
) Inner rotary type:
) Wen rotary type.
.22 The same rotation direction is divided into:
) Two-way rotation:
Two-way rotation. 3.3 The product model should comply with the provisions of B/T1=SD. The product should be completed before the base state quarterly number of the product is completed. Approved by the Ministry of Machinery Industry in 1998-0319, the general technical conditions for the use of machine processing technology, the general technical conditions for the use of packaging technology, the general technical soft parts for the use of products, and the implementation of 19987-01. Basic pregnancy number, acceptance gas should be, idling transfer, small mold room, original volume gas consumption, rate level)>, hole diameter, inner diameter, viewing angle, viewing angle, 38~45 35~-46
(six electric)
(input>
22×1C32EXE9
JB/TA718
product cost variables
43~·55
38--55
51-.5sn-835---1r0
: impact 32 impact 22. 32 2~ t 32 back load 10
back me 19 Can be turned 25
full pressure return plate
(eight)
23×0825×138
blue, the gas consumption is the sum of the gas consumption of the impact and return parts of the drilling under rock conditions, 4
Technical requirements
36×97
The product should meet the requirements of this standard, and should be manufactured according to the drawings and technical documents approved by the specified sequence. The product should be left under normal circumstances and run on the ground: 4.2
Same as 35
290816
38X7645162
All parts (including purchased parts, cooperative parts and standard parts) must be inspected by the quality inspection department before assembly. Specifications: 4.3
The quality of investment castings should meet the requirements of JF/T162. 4.4
The quality of molded parts should meet the requirements of JF/T13. 4.5
The quality of molded parts should meet the requirements of JB/T164. 4.6
The quality of the two parts of the machine should meet the requirements of T7164, the joint parts of the products should be polished, and the assembly of the products should meet the requirements of JB/T7155. The molded parts should be interchangeable. 4. 10
The product quality should comply with the provisions of ZBJ8=014. The product rust should comply with the provisions of JB3576.
4.13 The product's main life should comply with the provisions of Table 2. The main wear and tear test parts and their components are listed in Appendix A (standard time record).
Strong car market
5 Test method
JB/TA718—J998
Table 2 Main wear and tear service life of the product
Number of specifications
The product performance test shall be carried out in accordance with the provisions of JB5521 5.1
The product's limited production quality shall comply with the provisions of JB5893 5.
Surprise
Chemical step-by-step
5. 3 Inspection of product activity shall comply with JB/T 41 The inspection should be carried out in accordance with the provisions of Table 3: Product Cleanliness Inspection Rules The products can only leave the factory after being inspected by the quality inspection department. The products should be returned with certified quality. 6.2 Product scanning shall be carried out in accordance with the provisions of 2838. 6. Product acceptance inspection is formulated by the manufacturer according to its specific products, but the parameters listed are in accordance with the provisions of Table 1. 6. When the product is in one of the following situations, type inspection should be carried out for new products;
b, product design, process points and technical materials have changed; production indicators are changed;
d for products produced in batches or on a large scale, once every 3-5 days: e) the quality inspection results should be exactly the same as the last type inspection results: E: When the national quality supervision agency issues type inspection requirements, 6.S retrograde type inspection products, select + the number of samples from the qualified products to form a test bench, if one of the items is unqualified, it should be re-tested, if there are still unqualified products, it will be disqualified. Marking, packaging, transportation and storage. 1. The product should have a label with the following contents: a) Manufacturer's notice or factory notification: product name and model; e) Certificate of manufacture number; 2) Year and month of manufacture. 7.2 Product packaging should comply with the provisions of J/T7332. 7.3 Product packaging should be accompanied by the following technical documents: 1) Product specification sheet; 2) Product quality certificate; 3) Use and maintenance instructions; 4) Product quality certificate.4. The products shall not be transported to the user before they are stored. They shall be stored in a cool place and stored in a dry warehouse during the period of storage. 3
JB/T 8718—1998
Appendix A
(Appendix to the standard)
Test conditions for the service life of the main wearing parts of the product11 Test conditions for the service life of the main wearing parts of the product12 Test conditions for the service life of the main wearing parts of the product:) Operating pressure: 0.55--0.65MPa) Test strength: 120--140M1a;
) The diameter of the needle should meet the requirements of the diameter in Table 1A2 The discard limit of the main wearing parts of the product
The discard limit of the main wearing parts of the product is as specified in Table AITable A1 The discard limit of the main wearing parts of the product
This document is valid
Quality assurance
1. Medium 2mm;
2. Huajian raised the surface cells or 2ra2
chemical two reports 2mg
flower test 0 on the board 20:0l
flower makes the world 2tr.m
card, strict two good, the surface case is in 2. 5mm
caliper two sides grinding report 2.Emm
Note: for the rotation of the book to dance to the two cows, if it is too much, it will be considered abandoned, and
1. The same as below should be measured at the diameter / 2:
2. Flower surface master, all Bo take the average of the disturbance of the 12 pieces from the impact surface as the standard
small surface
mark as the standard
carefully mark the title with the large head surface at the average value of the light within the end 5mm each world as the height 1/2 of the density temperature standard 1-1 measured at the effective diameter 1/2 to
measurement, the average blood volume within the effective step is the standard
measure at the caliper not 1 light production, the average loss of one step is the standard
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.