Some standard content:
IS 61.050
Y 75: Y 78
Chemical Industry Standard of the People's Republic of China
(1999)
Published on April 20, 1999
Implemented on April 1, 20000
National Petroleum and Chemical Industry Bureau
Registration No.: 2812-1559
1IG/T30851999
This standard is a revision of the chemical industry standard HG/318103 total plastic cold grid shoes. The main technical differences of this standard H3085-19S are: the wear of physical properties is not divided into semi-transparent bottom, color bottom, and color bottom. The production assessment items are:
collect the indicators of excellent appearance products!
Added the appearance indexes such as good quality, color and sulfur deficiency;
Added the physical and mechanical properties test methods appropriately;
Added the test method of external dynamic sample adhesion strength test.
This standard is based on the same period of the Advisory Information 308-1989. This standard was proposed by the Technical Supervision Bureau of the former Ministry of Chemical Industry of the People's Republic of China. This standard was approved by the Technical Committee of the Sixth National People's Congress of Shandong Province on the basis of the technical committee of the Standardization of Rubber and Image Cavity Products, the upstream effect of the Qian Silk Factory, and the Shanghai Biting Research Institute. This standard is originated by: Xue, and the company: This standard is the first time to be issued as a national standard. It is a standard for the promotion of the industry and is a new standard for the industry. 35
1 Specification
Chemical Industry Standard of the People's Republic of China
Rubber Plusties achesive shoryHG/T3085-1999
Original Part H5/T.—1
This standard specifies the requirements, test specifications, marking, packaging, transportation and storage of rubber and plastic cold adhesive shoes. This standard is applicable to road shoes made of rubber and plastic as raw materials and processed by the processing method, which are generally used for sports and daily use, and are not suitable for light use. 2 Referenced Standards
The provisions contained in the following standards constitute the body of this standard through reference in the notes. When this standard is issued, the versions shown are all current. All standards are subject to change. Parties using this standard should consider using the following standards for the latest version (T52392 Determination of tensile properties of vulcanized rubber and rubber with heat resistance GB/531-92 Determination of Shore A hardness of vulcanized rubber (MEIS07514: 186) Determination of the adhesion strength of rubber to fabrics with resistance to chemical or thermal shock B/T>32
1689-2 (89) Determination of the properties of chemical rubber by standard machine) GH 254191
Standard temperature, temperature and time for the incubation and testing of rubber specimens (C9VIS471: 1983) - National Society Number and Series
HG7 2180:
HGT 24c3
Speaking of chemical image politics cover test force method section general requirements rubber standard inspection specification measurement, marking, packaging, transportation, storage 92
H:7!2489
State microporous material hardness test method
HG/T 2872-17
2876-1997
3 Product classification
Silk acid shoes, wheel shoes
4 Requirements
4.1 Gui number, number
Rubber and plastic microporous material visual fullness test method Cotton plastic quilt porous material compression test method must know the nature, model, length, size, grade are all according to the thief (B321 according to the implementation: 2.2 Quality single grade
4.2.1 According to the material The physical and mechanical properties are classified into quality grades according to the energy and external quality. The physical and mechanical properties are the basis for selecting the internal quality of the products. 4.2.2 Appearance is the basis for the customized products to be divided into first-class products and qualified products. Products that do not meet the quality standards are classified as unqualified products.
4.2.3 Physical and mechanical properties
Should comply with the provisions of Table 1:
EU Petroleum and Chemical Industry Bureau 399-04-2 batch Standard 200-04-01 solid bottle
branch core sect
micro in
pull Zhongxu, MTa
energy milk n
now, Shao Er and both · meaning
compression code deformation, treatment
standard mountain [H, Mg/)
body, lower upper. Display Institute
strong standard.1/m
4.2.4 appearance quality
bottom contains performance determination:
War grain, old hook, gas pool
Flower farmer, safety shape
HG/T3085-1999
Material mechanical properties
Fill 2 appearance quality
Diameter 2, the first ten 1mm limit
Some, the bending center has
hazard elimination, the issuance
obvious part and the six products have non-muscle parts, not more than mm, usually not more than 1 n drop 1 The color TV certificate is not light, the eight-image beauty is not twisted before use, the part is not allowed to exceed 30m, the center of the business and the generation exceeds a, the sea has a sound, the hole is not steam right, the extension and accessories are damaged: the reverse thread, the jump needle, the breakage is not allowed, the defective product needle is not allowed: there is a needle ruler at 1 and 2 places, and there is a mark inside the large clothes light inside the edge but not u:u, it is convenient, and the small "place, the book is not allowed to have a curve. The teaching basis is not clear, the empty shape modification
the price and the F standards are: 1. The area of the product is not less than 8m, the limit is 15mm, and the brush is not close to the idea
. The package is slight, and the shadow of the beauty reduction edge must not exceed 13mm. 1: The part of the city color Xin'an cannot be planned. 5m, the length cannot exceed 15m, the area cannot exceed 6mm
the internal air, through 1--m, the integrated air
load is not allowed, the modification must be no more than 2 limitswwW.bzxz.Net
one side is not more than 1mm long, not more than one m
inside the store decision H. Not more than 1mm
! Two nights, leave the meeting
consumption after, cattle material
HG/T3085—1999
Table 2 ()
1m visual light room double sex lead to the part without light color solid, shape
no geese
good below the forbidden area is not too big: mm year one place
+15mm turn inside it male area person under 12
u:u: single not too big ten:nn, external ticket count is not more than 50m.m, single at 2mm, shadow
original at
sticky road tight not more than: basic air
some double sex after tension belt high yield relative too low 3 mm; after the sample degree difference is small +mm quality ten people in?
1And the standard double-color parts can be lightly colored
for the relevant plan, the influence of the letter
a standard has
Guilan cumulative area benefits too Ding year-place people
dry 22m see the sixth area is not more than 1.5
a large ten 50m outside the store count people
large Emm single not more than 3c1u. Light can
effect beautiful
it will build the service on the correct science is not big
fit the device does not exceed the basic neat
element after the high can not help
distance people +4mm: fit + people 2
silk people's joy original my clothing beauty item strict 5.1 Test method for the test parts
according to IIG/u8, t21 clause
6.2 Tensile strength change fracture rate
batch/8 implementation, sample color specification [type will be (ie 6m) 5.3 Quality test
actual delivery according to the actual implementation,
micro bottom according to /12489 mature implementation
technical milk GT current specification
: when the test length is not done, the room can be used, 5.5 Compression position test
according to HG12875 heat setting
5. 6 groups of measurement tests
Performed in accordance with HKC/T27
5.7 Tests
5.7.1 The sample preparation must be completed 24000 mm after the glue is finished. 5.7.21 The sample is long. The effective length is 12 mm. The effective length is not less than mm. 5.7.3 The middle part of the upper is the middle part of the upper. The small belt and the middle part of the upper are combined. 1. The outer sole is cut around 1umm to 0.2mm, and the test surface is cut to the bottom of the test surface. C and the end are used for treatment.
5.7.4. Outer sole and toe strap adhesive
HC/T30851999
Cut the upper surface along the inner sole plane and make a test piece at the adhesive position of the outer sole! b. Make a test piece from the waist of the shoe where the upper is higher than the bottom plane and is bonded to the upper; the upper is in the shape of a triangle, with an effective width of 10mm0.2mm and a length of 120, and the effective height is not less than 53mm; c. There is a crack at one end of the upper, which is used as a head strap. 4.7.5. Test steps and test results
According to G:E regulations
6. Inspection regulations, labeling, packaging, transportation, and the relevant regulations of HG243 for cold upper shoes shall be followed. The label number shall be marked on the packaging of each pair of shoes. 4u
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.