GB 3734.2-1983 Compression-type tapered thread straight-through fitting body
Basic Information
Standard ID:
GB 3734.2-1983
Standard Name: Compression-type tapered thread straight-through fitting body
Chinese Name:
卡套式锥螺纹直通接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
drafter:Hu Lusheng, Liu Dequan, Cheng Zhenshi, Wang Muqin
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:Standardization Institute of the Ministry of Machinery Industry
Proposing unit:Ministry of Machinery Industry of the People's Republic of China
Publishing department:National Bureau of Standards
competent authority:China Machinery Industry Federation
Introduction to standards:
GB 3734.2-1983 Compression sleeve taper thread straight connector body GB3734.2-1983 standard download decompression password: www.bzxz.net
Some standard content:
Marking example:
National Standard of the People's Republic of China
Compression-type tapered thread straight connector bodywww.bzxz.net
Male connector-Body
24±30
Compression-type tapered thread straight connector body with nominal pressure level E and pipe outer diameter D of 14mm: connector body E14GB 3734.2—83
Published by the National Bureau of Standards on June 17, 1983
UDC621.643.4
GB 3734.2—8B8
1984-04-01Implementation
GB3734.2-83
Technical conditions shall be in accordance with the provisions of GB3765--83
Instructions for addition
GB3734.2-83
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry, and participated in by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Xiqin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.