title>JB/T 10127.3-1999 Unequal Angle Iron for Machine Tool Fixture Parts and Components - JB/T 10127.3-1999 - Chinese standardNet - bzxz.net
Home > JB > JB/T 10127.3-1999 Unequal Angle Iron for Machine Tool Fixture Parts and Components
JB/T 10127.3-1999 Unequal Angle Iron for Machine Tool Fixture Parts and Components

Basic Information

Standard ID: JB/T 10127.3-1999

Standard Name: Unequal Angle Iron for Machine Tool Fixture Parts and Components

Chinese Name: 机床夹具零件及部件 不等边角铁

Standard category:Machinery Industry Standard (JB)

state:in force

Date of Release1999-08-06

Date of Implementation:2000-01-01

standard classification number

Standard ICS number:General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)

Standard Classification Number:Machinery>>Process Equipment>>J44 General Fixture

associated standards

alternative situation:Original standard number GB/T 12895-1991

Publication information

other information

Focal point unit:Mechanical Science Research Institute

Publishing department:Mechanical Science Research Institute

Introduction to standards:

JB/T 10126.3-1999 This standard specifies unequal angle irons with a specification of 200~800mm. This standard was first issued in 1983 as JB 3406-83 and revised for the second time in 1991 as GB/T 12895-91. JB/T 10127.3-1999 Unequal Angle Irons for Machine Tool Fixture Parts and Components JB/T10127.3-1999 Standard Download Decompression Password: www.bzxz.net

Some standard content:

IC5 28.060.41
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
Issued on August 6, 1999
State Bureau of Machinery Industry
Implemented on January 1, 2000
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
Unequalangles
This standard specifies the unequalangles of 20-mm-2. Reference Standards
JB/T 10127.3—1999
The following standards contain the following texts, which become the provisions of this standard through the use of the right subscript. When this standard is published, the versions shown are effective. All standards are subject to revision. Parties dealing with this standard should consider using the latest version of the following standards as much as possible: GB/T9439-1988 Carbon Certificate Continuation
JB/T S044—1999
3 Dimensions
Technical requirements for machine parts and components Www.bzxZ.net
Dimensions are shown in the following figure.
4 Technical conditions
4.1 Material: HIT200 as specified in GR/T9439. 4.2 The machine shall be treated as before.
4.3 The radius of the casting fillet not specified is -R5. 4.4 The number of grinding points shall not be less than 16 for every 25 mm×25 mm area. 4.5 Other technical conditions shall be in accordance with the provisions of D/T8044 5 Marking
5. 1 Marking example:
t=800mm, R=5mm unequal angle iron: Angle iron 800×500B10127.3199g
Approved by the State Machinery Industry Bureau on August 6, 1990, implemented on January 1, 2000
JB/T10127.3—1999
1 The structure and quantity of the holes can be designed according to the needs of use. 225×25m surface [not less than 16.
Search number n
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.