GB/T 3749.2-1983 Compression fitting bulkhead right angle connector
Basic Information
Standard ID:
GB/T 3749.2-1983
Standard Name: Compression fitting bulkhead right angle connector
Chinese Name:
卡套式隔壁直角接头体
Standard category:National Standard (GB)
state:Abolished
Date of Release1983-06-17
Date of Implementation:1984-04-01
Date of Expiration:2008-11-01
standard classification number
Standard ICS number:21.060.60;
Standard Classification Number:Machinery>>General Parts>>J15 Pipe Accessories
Publication information
publishing house:China Standards Press
Publication date:1984-04-01
other information
Release date:1983-06-17
Review date:2004-10-14
Drafting unit:Standardization Institute of the Ministry of Machinery Industry
Focal point unit:National Technical Committee for Standardization of Pipe Accessories
Publishing department:China Machinery Industry Federation
competent authority:China Machinery Industry Federation
Introduction to standards:
GB/T 3749.2-1983 Compression-type bulkhead right-angle connector GB/T3749.2-1983 Standard download decompression password: www.bzxz.net
Some standard content:
Marking example:
National Standard of the People's Republic of China
Bulkhead uniform elbow body
Bulkhead uniform elbow-Body
Nominal pressure level J, pipe outer diameter D is 11m ferrule bulkhead right angle joint body joint body J14GB3749.2-83
National Bureau of Standards 1983-06-17 issued
UDC 621.643.4
GB 3749-2-83
198404·01 implementation
Nominal Bull
M10×1
M12×1.25
M20×1.5
M27 ×1.5
M30×2
M33×2
M36×2
M45×2
M48×2
M52×2
M30×2www.bzxz.net
M33×2
M36×2
M39×2
GB 8749+2--88
Note: weight is calculated value, specific gravity is .5kg/dm3. Technical conditions shall comply with GB3765-83. Limit
GB 8749.2--83
(kg/100 pieces)
Additional remarks
GB 8749.2-11
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. This standard was drafted at the expense of the Standardization Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Modular Machine Tool Research Institute, Zhejiang Haiyi County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 70th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Zengsheng, Liu Dequan, Cheng Shi, and Wang Su. From the date of implementation of this standard, the original ministry standard B193-7 "Cut-type right-angle connector" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.