This standard specifies the basic types and dimensions of hobs for integral involute splines with a module of 0.25mm to 2.50mm and a pressure angle of 45°. This standard is applicable to hobs for machining cylindrical spur involute splines with basic tooth profiles in accordance with GB/T3478.1 and dimensions in accordance with GB/T3478.4. The hobs are of Class C accuracy. GB/T 5105-2004 Basic types and dimensions of hobs for involute splines with a pressure angle of 45° GB/T5105-2004 Standard download decompression password: www.bzxz.net

IC5.25. 100.25
National Standard of the People's Republic of China
GB/I5105—2004
Replaces GE5105—1585
The basic types and dimensions of hobs for 45' preggureangleinvolutesplines
2004-02-10 Issued
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China National Standardization Administration
2004-08-01 Implementation
Standardized by GB:=510=
93545 Basic type and size of linearization rate 1
This standard is difficult to compare with 0
Sweep the following changes
Some added marks Example:
Xuan Modified model series code:
Technical standard requirements A, Xie requirements are informative requirements. This cup Yabai Ten Giant Machinery Industry Federation issued this standard on the standardization of the technical committee of the public mouth. This standard fish fish drafting unit: Liangyang Tool Factory This standard main drafter: Liu Jiaosan, Shuyegongshu,. This standard is based on the historical release documents of the standards: CT4/T 5J5—19H5
CB/I5105—2C04
1 version
CB/T5:05—2004
45 pressure angle involute spline hob basic type and size This standard specifies the modulus 0.-3,5, the pressure angle of 45, the type and size of the overall involute chain roller, this standard is based on the six-inch straight involute roller specified in GB/T3478.1 and the mixed material specified in G/3473.1.
can be withdrawn as grade 1.
2 Normative references
The following documents become the clauses of this standard through the use of the latest cited documents. The date of the cited document is not applicable to any subsequent revision (notice that the revised version is not applicable). However, if an agreement is reached on the latest version of the document in accordance with this standard, the latest version shall apply. This standard. CB/TS42: Round pull ear tooth new well line flower chain effect base six inner magic public volume (3/TM7%.1-1SSH!ISC)4156,158
G3:T479.4 Social tooth gradual T line flower chain 1\pressure scale ten table (B/3478.4-1555.nC9JS41=:1
C3/T=1U3-200 gradual load spline liquid H transfer condition G/T 6132 Interchangeable dimensions of blades (GB/T 6132-993, JS) 242: 3813 Type and dimensions
3.1 The type and dimensions of the linear roller shall be as specified in Table 1 of Figure 1. 3. The roller shall be made into a single head on the right (it can be made into a left one according to the requirements; the thickness is parallel to the axis of the force. 3.3 The dimensions and dimensions of the blade shall be as specified in 6/T 6132. 3.4 The manufacturer shall decide.
CB/I 5105-2004www.bzxz.net
The first strip
Marking example
Help Sanqi State
Micro agent. The left side of the book gradually opens the channelization application roller and is marked as: a\ Gn:T .in5--uo.
New Yuanran Huadun Paint Chuanxue
Lifting Heart Method
A.1 Calculation of Rolling 8 inches According to Figure A.1 and Table A, 16. 5
Section!
Medical Second Street n
Division of Medical Pregnancy and Han in Jiaozi
Production Back Quantity K: mm
Appendix A
(Informative Appendix)
Calculation Dimensions of Knife Avoidance
GB/T5105-2C04
GB/T 51052004
Informative Appendix)
Axial tooth profile dimensions of the blade
B.1 Inward profile dimensions of the bag, Figure 1, Table 1, b...—1.2x
First member month
Series
Drawing to the world limit P, rmau
Thickness/1nm
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.