Some standard content:
National Standard of the People's Republic of China
Marking and packaging of yarn-dyed fabrics
1 Subject content and scope of application
This standard specifies the packaging, packaging and marking of yarn-dyed fabrics. This standard applies to the marking and packaging of yarn-dyed fabrics. 2 Packaging
The packaging of all types of yarn-dyed fabrics should ensure that the product quality is not damaged and is convenient for storage and transportation. 2.1 Classification of yarn-dyed fabric packaging
GBn 287-88
2.1.1 The inner packaging of yarn-dyed fabrics is divided into three categories: flat folding, roll plate and roll. 2.1.2 The outer packaging of yarn-dyed fabrics is divided into five categories: cloth bag, cardboard box, corrugated box, nailed wooden box and plywood box. The inner packaging form, technical requirements and classification code of yarn-dyed fabrics are shown in Table 1. 2.2
Inner packaging form
Flat folding
Flat two-fold
Flat three-fold
Flat four-fold
Single-width coil
Double-width coil
Technical requirements
The folding width of each piece of cloth is 1m (or 1yd). When folding, the cloth surface must be flat, the cloth edges must be neat, and the two ends must be flat and wrinkle-free. The head wrapping style should be adopted, and the head wrapping length should not exceed 1m (or 1yd). The front side of the cloth faces inward, and the folding mouth is not wrapped to prevent contamination
According to the agreed length, the cloth shall be rolled on the coil core of the specified size. The coil shall be flat and stiff, the cloth edges must be neat and wrinkle-free, the front side of the cloth faces outward, and the inner end fold shall not exceed 15cm. For fabrics with waistbands, the waistbands on both sides should be symmetrical and not skewed, and the waistbands should be glued with transparent adhesive tape or glue
Wrap the fabric on the reel of specified size according to the agreed length, "flat and tight, the two sides of the round roll should be neat, the difference between the two sides should not exceed 2cm, no wrinkles, and the front of the fabric should face outwards. For fabrics with waistbands, the waistbands on both sides should be symmetrical and not skewed, and the waistbands should be glued with transparent adhesive tape or glue
2.2.1 The hangtags tied to the rolls and rolls of exported fabrics must be placed in a fixed position, and the contents of the hangtags should be filled in clearly and neatly, and no alterations are allowed. The hangtag line must be worn on the corner of the fabric.2.2. 2. The inner packaging decoration of color fabrics must meet the requirements, and the trademark must be pasted squarely, the glue liquid must be moderate and not permeable, and the printed gold seal must be clear and not blurred. The printing position must be in accordance with the contract requirements.
2.3 The specifications of packaging materials are shown in Table 2. Approved by the Ministry of Textile Industry of the People's Republic of China on June 8, 1988 and implemented on October 1, 1988
Material name
Kraft paper
Wax paper
Plastic film bag
Sewing thread
Binding rope
Plastic binding tape
Metal binding tape
Material specification
GBn 287-88
Coarse plain cloth or other materials with equivalent performance No. 1 kraft paper
Blow-molded polyethylene or polypropylene transparent film or bag Cotton thread or substitute with equivalent performance
Plastic rope
Technical requirements
Breaking strength is not less than 294N in the warp direction and not less than 196N in the weft direction 60~80g/m2, in line with the requirements of QB706-79 "Kraft Paper" Meet the requirements of the ordering unit
28tex12~21 strands
Polypropylene rope three strands with a diameter of 0.5cm and above
Meet the requirements of SG234.81 "Plastic Packing Tape" After rust-proof treatment and outer padding with thin cardboard, cloth strips wrapped around the interface 2.4 Cloth bag packaging
2.4.1 The inner packaging of the cloth bag should be fabric of the same specifications. The pattern and color matching shall be agreed upon by the supply and demand parties or implemented according to the requirements of the order form. Cloth is packed in people's bags The inner package should be arranged neatly. Special requirements shall be implemented in accordance with the provisions of the agreement. 2.4.2 The packed fabrics shall be packed under pressure. With the consent of the consignee, short-distance transportation can be packed without pressure. 2.4.3 The inner package of fabrics shall be covered with kraft paper (or wax paper) or plastic film. The specific method of adding corrugated paper outside the kraft paper or plastic film for the inner package of yarn-dyed fabrics shall be negotiated and decided by the supply and demand parties. When wrapping the fabric with wrapping cloth, the inner fabric shall not be exposed, and the overlap of the two sides of the wrapping cloth shall not be less than 10cm. The edge of the wrapping cloth is folded down into the sewing bag, and the sewing bag starts from the corner joint to the other end of the wrapping corner. When sewing the bag, the stitches cannot sew the inner fabric, and the stitching stitch length is 2.5~5cm. Products with special requirements for the stitching stitch length shall be implemented in accordance with the contract and relevant regulations.
2.4.4 Bundling of cloth bags
2.4.4.1 Use tying ropes to tie the cloth bags horizontally, and the number of rope tying is as follows: a. Width 100cm and below: double turn 4 lanes, b. Width over 100cm: double turn 5 lanes and above. 2.4.4.2 When tying with ropes, the ropes should be 15-20cm away from both ends of the cloth bag. When tying with metal straps, there should be padding between the metal straps and the cloth bag. The two ends of the plastic straps or metal straps should be connected with connecting pieces. There should be no protruding burrs. 2.4.4.3 The cloth bags that have been packed and tied with pressure should be square at all four corners and fall flat on the ground. 2.5 Carton or wooden box packaging
Fabrics that already have inner packaging can be packaged with cardboard boxes, corrugated boxes, nailed wooden boxes or plywood boxes. The specific form of outer packaging shall be implemented in accordance with the provisions of the contract or relevant agreement. Requirements for carton or wooden box packaging: 2.5.1 A layer of kraft paper, waxed paper or plastic film should be neatly placed around the box and on the top and bottom. 2.5.2 The cloth inside must be placed tightly in the box to prevent the cloth from moving during transportation. 2.5.3 Use plastic or metal strapping tape to tie up cartons, and use connecting pieces to connect the two ends of the plastic or metal strapping tape and tie it up tightly. It is difficult to insert fingers. The spacing of the strapping tape should be balanced and there should be no protruding burrs. 2.5.4 Use nails to nail the wooden box firmly. Do not nail the nails on the words on the logo and do not penetrate into the box to prevent damage to the cloth. 20
GBn 287-88
2.5.5 For cloth bags and cloth boxes transported in containers, the outer corridor dimensions should comply with the relevant regulations for container transportation. 3 Package (piece) regulations
3.1 When packaging (pieces), they should be packaged according to the grade of the product. 3.2 Package weight
The package (piece) of yarn-dyed fabric is divided into two types: whole cloth and patchwork cloth. The weight of each package (piece) shall not exceed 85kg. 3.3 Packaging formwwW.bzxz.Net
Flat folding is the most commonly used inner packaging form at present. In order to improve the packaging quality and facilitate sales and garment processing, it should gradually transition to the form of rolls and reels.
3.4 The length and number of sections of each package (piece) of cloth are stipulated in Table 3. Table 3
Fabric types
Bed sheet
Thick fabric
Medium-thick fabric
Medium-thick fabric
Thin fabric
Length of each piece of cloth
Whole piece of cloth
Piece/piece
Patchwork cloth
Maximum number of sections
Section/piece
The length and weight of the pieces of extra-light and extra-heavy fabrics can be increased or decreased according to the principle of convenient operation. 3.5 Provisions on the length of patchwork fabric
Number of matching fabrics allowed in patchwork fabric
5 ~～9. 9 m
3.5.1 Except for the matching fabrics of 5～9.9 m and 10～17.9 m, the other matching fabrics are between 18～50 m. 3.5.2 The length of fabrics for false opening and special fixed length opening, and the number of fabrics in packages (pieces) shall be implemented in accordance with the contract and relevant agreements. 3.6 Provisions on the length of odd and defective fabrics
Large odd fabrics: 10～17.9 m.
Medium odd fabrics: 5～9.9 m.
Small odd fabrics: 1～4.9 m (no serious defect with a score of 4 is allowed). Odd fabrics: 0.2～0.9 m and fabrics with particularly serious defects on the surface. 3.7 Color difference within the package and batch of superior and first-class products 3.7.1 The color difference between sections (pieces) and sections (pieces) of superior and first-class products within the package is 3 to 4 levels. 3.7.2 The color difference between packages of superior and first-class products within the batch is 3 levels. 3.7.3 If the purchaser has other requirements for color difference within the package and batch, it shall be implemented in accordance with the agreement between the two parties. 4
The markings shall be clear, legible, durable and easy to identify. 21
4.1 Finished product instructions
GBn 287— 88
“Finished product instructions” shall be affixed to each piece or section of yarn-dyed fabric finished product. The format is as shown in Figure 1.4.1.1
Length:
Warp and weft yarn numbers
(British count)
Warp and weft density
(root/10cm):
) Shrinkage rate, warp %, weft
(Internal quality degradation mark)
Length:
4.1.2 Finished product instructions shall be written on white paper. The color of the table lines shall be specified as follows: m
Superior products: purple. First-class products: red. Second-class products: green. Third-class products: blue. Substandard products: black. 4.1.3 Finished product instructions shall be affixed to the corner of the reverse side of the fabric. 4.1.4 Clear factory stamps shall be affixed within 5cm of the corners of both ends of each piece or piece of cloth on the reverse side. When pieced together, the saddle stamps shall be affixed at the joints of both ends. The stamps shall not penetrate the front side of the cloth and shall preferably be washable. 22
4.2 Piece List
GBn287-88
Piece length record sheet shall be attached to the package of pieced cloth, the format is shown in Figure 2. City (County) x
Piece Assembler
Reviewer
Note: Fill in the lengths of the two pieces of cloth in the same grid for pieced cloth. 4.3 External markings of packages
) and other products
4.3.1 The external markings of packages (boxes) shall be clear and easy to identify and shall not fade. The format and content are shown in Figure 3. 23
Width:
Total length:
Volume, ×bxh,
GBn 287-88
City (County)
Gross weight:
Note: "Quality" color: Red for superior quality, blue for first-class quality, and blue for other quality. 4.3.2 The outer mark of the package is painted on both ends (sides) of the package (box), and the blank space below the mark is used for the commercial department and the transportation department to paint the mark. 4.3.3 The two ends (sides) of the painted mark must be the same (the end where the assembly list is placed in the package or box is painted with "Assembly list at this end") 4.3.4 The size of the outer mark of the package can be adjusted appropriately according to the volume of the package (box) of different color woven fabrics, but the format and content shall not be changed at will. 4.3.5 If there are special requirements for marking and packaging, they shall be implemented according to the agreement after confirmation by both the supply and demand parties. Additional Notes:
This standard is under the jurisdiction of Wuxi Textile Silk Inspection Institute, the technical unit responsible for yarn-dyed standardization of the Ministry of Textile Industry. This standard was drafted by Wuxi Textile Industry Bureau, Wuxi Textile Silk Inspection Institute, Shanghai Xinlian Textile Import and Export Corporation, and Tianjin Yarn-dyed Industrial Corporation.
From the date of implementation of this standard, the marking and packaging parts of the former Ministry of Textile Industry standard FJ515-82 "Yarn-dyed polyester-cotton blended fabric" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.