drafter:Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende
Drafting unit:Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian Housing Equipment and Tools Factory
Focal point unit:National Tool and Hardware Standardization Center
Proposing unit:Quality Standards Department of China Light Industry Federation
Publishing department:China Light Industry Federation
This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of diamond-shaped masonry shovels. This standard applies to the diamond-shaped masonry shovel No. 304 specified in QB/T 2212.1 "Terms of Construction Tools (Masonry)". QB/T 2212.13-1996 Construction Tools (Masonry) Diamond-shaped Masonry Shovel QB/T2212.13-1996 Standard download decompression password: www.bzxz.net
Some standard content:
QB/T 2212.13--1996 This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001-1985 "Terms of Construction (Masonry) Tools", ZBJ47002-1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into the light industry standard. In the overall structure of the standard, the terminology of construction tools, general technical conditions and their product standards are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" is cancelled, and some of its relevant provisions are merged into the general technical conditions. The product standards are retained according to the numbers in the terminology, and a "Diamond Masonry Shovel" product standard is added. This standard changes the word "brick" in the brackets of the original name to "brick type", and puts it behind the standard name "construction tools", so that the hand tools used in construction operations are more standardized, and a clear limitation is made in the scope of application. This standard is a supporting standard, and the terms and general technical conditions are based on it. It retains the technical content in the original standard that has been proven to be suitable for my country's situation in practice. The main dimensions in the product standard have been optimized, and the child specifications have been added, and the limit deviation has been indicated. This standard has modified and improved some quality indicators. From the date of implementation of this standard, ZBJ47001~47003-1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian Housing Equipment Tool General Factory, Shanghai Quanxian Tool Factory No. 3, etc. wwW.bzxz.Net The main drafters of this standard: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool Hardware Standardization Center for interpretation. 620 Light Industry Standard of the People's Republic of China Construction Tools (Brick and Brick Category) Diamond Masonry Spade QB/T 2212.13—1996 This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of diamond masonry spades. This standard applies to the No. 304 diamond masonry spade specified in QB/T2212.1 "Terms of Construction Tools (Brick and Brick Category)". 2 Referenced Standards The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. QB/T2212.1--1996 Terminology of construction tools (brickwork) 6 General technical conditions for construction tools (brickwork) QB/T 2212.2--1996 3 Product classification 3.1 Type The type of diamond masonry spade is shown in Figure 1. 3.2 Main dimensions The main dimensions of diamond masonry spade shall be as specified in Table 1. Table 1 Shovel board length L Limit deviation Shovel board width B Note: Special types and other dimensions may not be restricted by this table. Approved by China Light Industry General Association on March 22, 1996 Main dimensions Limit deviation riKAoNniKAca- Side length behind the shovel Thickness of shovel Implemented on December 1, 1996 Technical requirements QB/T2212.13—1996 Technical requirements for shovels shall be in accordance with the provisions of Chapter 4 of QB/T2212.2—1996. Test methods 5.1 Dimension inspection Measured with universal measuring tools. Other item inspections Performed in accordance with the provisions of Chapter 5 of QB/T2212.2-1996. 6 Inspection regulations Performed in accordance with the provisions of Chapter 6 of QB/T2212.2—1996. Packaging, marking, transportation and storage shall be in accordance with the provisions of Chapter 7 of QB/T2212.2--1996. 622 Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.